• 한국의류학회지
• /
• 제30권6호
• /
• pp.870-879
• /
• 2006

In this study, the difference in the mechanical properties of silver and cotton weft knitted fabrics was studied. Six silver fabrics for the summer ladies' knit outwear were knitted varying knit structure and fabric density. Two commercial cotton knitted fabrics were selected to compare the properties. subjective sensation of hand of the fabrics was also studied. Mechanical properties of the fabric samples were measured by KES-FB system. From these, primary hand values(HV) were evaluated by the conversion equation (KW-403-KTU) and the total hand value(THV) was carried out according to the KW-304 Summer. The result of the research show that silver weft knitted fabrics had lower LT, RT, G, 2HG and higher EM, W, LC, WC, RC than cotton weft knitted fabrics. The use of silver yam contributed to increase in surface roughness of knitted fabrics. As the silver knitted fabrics became thicker compressional energy increased. The use of silver yarns contributed to much better fabric handle compared with the use of cotton yam only. It appeared that coefficient of friction of tuck stitch was larger than that of plain and interlock stitch. KOSHI and FUKURAMI values of the tuck samples were significantly higher than those values of the plain and interlock samples, while SHARI values were low in general. The total hand value of tuck stitch was higher than those of interlock and plain stitch.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.71-75
• /
• 2005

For the damage tolerance improvement of conventional laminated composites, stitching process have been utilized for providing through-thickness reinforcements. 2D preforms were stacked with S-2 glass plain weave and S-2 glass MWK (Multi-axial Warp Knit) L type. 3D preforms were fabricated using the stitching process. All composite samples were fabricated by RTM (Resin Transfer Molding) process. To examine the damage resistance performance the low speed drop weight impact test has been carried out. For the assessment of damage after the impact loading, specimens were examined by scanning image. CAI (Compressive After Impact) tests were also conducted to evaluate residual compressive strength. Compared with 2D composites, the damage area of 3D composites was reduced by 20-30% and the CAI strength showed 5-10% improvement.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2007년도 한국지능정보시스템학회
• /
• pp.123-137
• /
• 2007

The information space of semantic web comprised of various resources, properties, and relationships is more complex than that of WWW comprised of just documents and hyperlinks. Therefore, ranking methods in the semantic web should be modified to reflect the complexity of the information space. In this paper we propose a method of ranking query results from RDF(Resource Description Framework) knowledge bases. The ranking criterion is the importance of a resource computed based on the link structure of the RDF graph. Our method is expected to solve a few problems in the prior research including the Tightly-Knit Community Effect. We illustrate our methods using examples and discuss directions for future research.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.280-283
• /
• 2002

In the manufacturing of large scale composite structures, the cost-effective processing and the enhancement of structural performance are critical. One of the most effective ways for this purpose is to use stitched multiaxial warp knitted (MWK) perform in the resin transfer molding process. This study reports the effect of stitching on the mechanical properties of MWK composites, and the feasibility processing of the thick U-beam structure utilizing the stitched preforms. Permeability of the preform, viscosity and cure property of the epoxy resin have been measured. The results of resin flow analysis has been used in determining the gate/vent locations of the RTM mold. Cross-sectional observation of the channel beam prototype demonstrated that the resin impregnation was almost complete, except for some surrounding area of stitched yarns.

• Composites Research
• /
• 제15권5호
• /
• pp.44-52
• /
• 2002

To study numerically the mechanical behaviors of advanced composite materials considering the microscopic phenomena as well as the macroscopic properties and behaviors, a multi-scale modeling and analysis by the mathematical homogenization method with the help of the finite element method(FEM) are reviewed. The hierarchical modeling strategy and the formulation are briefly described first to give some idea of the multi-scale framework. The latter half of this article focuses on the verification of the multi-scale analysis by the homogenization method in its applications to real advanced materials. The first example is the verification of the predicted macroscopic(homogenized) properties based on the microstructure of porous ceramics. In spite of the complexity of the random microstructure, the error between the predicted and the measured values was only 1%. Next, two applications to the process simulation of fiber reinforced polymer matrix composites are presented. The permeability characteristics are evaluated for sheared weave fabrics for resin transfer molding(RTM) simulation, and the thermoforming of FRTP sheet is analyzed considering the large deformation of the knit structure during the deep-draw forming was verified by comparison with the experimental results.

• 한국염색가공학회지
• /
• 제5권3호
• /
• pp.221-228
• /
• 1993

Cellulose acetate and methyl cellulose were synthesized from waste cellulose in order to make waste knit on value added highly. Crystal waste cellulose by oxidation using $HIO_4$ and then acetylation was decrystallized. A degee of crystallinity was measured by X-ray diffraction and the structure was identified by FT-IR spetroscopy, respectively. Cellulose acetate was prepared from the reaction of decrystallized cellulose with acetic acid, cone-$H_{2}SO_{4}$ and acetic anhydride. Also, structure identification by FT-IR and a degree of crystallinity by X-ray diffraction were performed. DS of the synthesized cellulose acetate was 2.8 and viscosity average molecular weight was 238,000. Also, methyl cellulose was synthesized by treating cellulose acetate with NaOH and iodomethane. DS of the synthesized methyl cellulose was 3.0. Glucose unit with three hydroxy groups was all substituted by methoxyl groups. It was identified by FT-IR spectroscopy. Also, the thermal properties of the synthesized methyl cellulose were examined by DSC. It shewed two shewed melting peaks at 22$0^{\circ}C$ and 24$0^{\circ}C$ in the 2nd scan. It proved that DS=3.0 of methyl cellulose was a thermotropic liquid crystal.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.282-291
• /
• 2010

Digital textile printing(DTP) is becoming more important because the production trend of textile printing goods is adapting to small-lot multiple items. Recently enhanced use of DTP is closely connected with production of high value-added products in fashion industry, which is also appropriate for quick response system(QRS). Quality of DTP depends on pre-treatment, after-treatment, ink, media, printer, etc. One of these parameters, Selection of good media is very important to obtain high quality of DTP products. Especially, the effects of media on printing quality of DTP according to yarn twist and structure of knitting fabric were examined in this study. Two types of yarn twist of 830 t.p.m and 1630 t.p.m for cotton knit were used and five types of media structures were knitted with single circular knitting machine. First, MIU, MMD, SMD's values are closely related with surface roughness of sample as well as printing quality. The hard twist samples were higher values than normal twist samples in the same media structure. In case of SMD, the values increased from plain to corduroy types. Second, aspect of line sharpness, line area, and line width values of hard twist samples decreased from plain to corduroy than those of normal twist samples. Third, line deviation values of hard twist samples, blurriness of line, also decreased than those of normal twist samples.

• 한국의상디자인학회지
• /
• 제18권1호
• /
• pp.51-60
• /
• 2016

This study aims to contribute to development of women's incontinence panties with anti-aging effect meeting customers' requirements by examining types, sorts, sizes and specifications of women's incontinence panties currently sold in the market. The results of analysis of a total of 22 commercial products are as follows. 1. Among the samples, 21 incontinence panties were slip on type like regular underwear; only 1 was pad insertion type. With respect to the length of side seam, 17 (77.3%) incontinence panties were above 14 cm which is classified as maxi; the rest of them (5, 22.7%) were 7~11 cm which is classified as middy. 2. With respect to size, the percentage of Size 3 was 40.9% showing the largest, followed by Size 4 (31.8%), Size 2 (18.2%), Size 5 (9.1%). To produce the incontinence panties considering various ages and body shapes, it is recommended to select above Size 4 as a minimum. 3. With respect to materials of the incontinence panties, natural fibers such as cotton or rayon were mostly used and a polyurethane, nylon or polyester was mixed to enhance the wearing sensation and stretchability of the panties. Finally, for structure of the crotch area, single knit was the largest (9, 40.9%), terry weave 7 (31.8%), sofe pile weave 4 (18.2%), and waffle weave or diamond weave 2.

• 복식문화연구
• /
• 제16권6호
• /
• pp.1156-1168
• /
• 2008

This study investigated the preceding studies and concept of Glam Rock style, modernistically reinterpreted its aesthetic function and symbolism and connected them to design. It analyzed according to the standards for classification the Glam Rock style appearing mainly in the collections from 2002 S/S to 2007 S/S and presented four pieces of design through the analysis. Its findings are synthesized as follows. First, unstructured design constitutes mule stressing gold cubic overall. It takes an unstable form by the placement of unshapely front ball of foot from transforming Chopin and a relatively poor heel. Second, over trimming constitutes separated pumps in the form of over trimming irregularly a piece of broken glass, metal and thumb tack. Third, Mix & Match combines Boot body of flexible knit material with an acrylic wedge sandal. Fourth, a platform sandal has the structure of color contrast between yellow and bronze in calf fur of tiger-skin pattern. I hope that this study will be developed by reflecting Glam Rock spirit and style as cultural phenomena through analyzing Glam Rock style and presenting design according to selected standards for classification, inferring plastic beauty of fashion shoes from them, investigating the change and feature of age-specific shoe design and making a new attempt possible.

• 한국의상디자인학회지
• /
• 제19권3호
• /
• pp.63-74
• /
• 2017

This study aims to contribute to the development of male incontinence underwear with an anti-aging effect that meets customer requirements by examining the types, sorts, sizes and specifications of male incontinence underwear currently sold on the market. The results of an analysis of a total of eight commercial products are as follows. 1) Among the samples, six types of incontinence underwear were of a pull-on style like regular underwear; two types were of a pad insertion style. With respect to the underwear design, four (50%) types of incontinence underwear were brief style. The rest were drawers (3, 37.5%). Only one was of a trunk (12.5%) style. 2) With respect to size, the percentage of Size 3 was 50%, followed by Size 4 (50%). Most of the size of the underwear uses hip measurement whereas Japanese products (3, 37.5 %) use waist circumference. 3) With respect to the materials of the incontinence underwear, natural fibers such as cotton were mostly used and a polyurethane or polyester was mixed to enhance the wearing sensation and stretchability of the underwear. Finally, for the structure of the pad area, a napping finish was the largest (3, 37.5%), single knit 2(25%), twill weave 2(25%), and rib weave 1.