• Journal of the Optical Society of Korea
• /
• 제11권4호
• /
• pp.173-176
• /
• 2007

We present a very simple and efficient bare-wafer inspection method using a knife-edge test. The wafer front surface and inner structures are inspected simultaneously. The wafer front surface is inspected visually using a knife-edge test while the inner structure is simultaneously inspected by a camera in the infrared region with a single white-light source. This paper presents a laboratory implementation of the test method with some experimental results.

• 한국안전학회지
• /
• 제23권4호
• /
• pp.67-71
• /
• 2008

Formwork is a temporary structure that supports its weight and that of fresh concrete as well as construction live loads. Slab formwork consists of sheathing, stringer, hanger and shore. In construction site, pipe supports are usually used as shores which are consisted of the slab formwork. In this study, compressive strength of 80 pipe supports was measured by knife edge test and plate test. Buckling load of pipe supports was analyzed by structural analysis program(MlDAS). Theoretical buckling load with/without initial deformation was got by theoretical analysis. According to these results, buckling load which was analyzed by structural analysis program(MlDAS) was larger than compressive strength of knife edge test and plate test. Theoretical buckling load without initial deformation was larger than compressive strength of knife edge test and plate test. But Theoretical buckling load with initial deformation was lower than compressive strength of knife edge test and plate test. Initial deformation equation for test method according to the pipe support length was suggested. Therefore, the present study results will be used to design the slab formwork safely.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.65-66
• /
• 2007

We present a new simple and fast bare-wafer inspection method. This method inspects the wafer front surface and inner structures simultaneously. The wafer surface is inspected using a knife-edge test in visible while the inner structure is inspected by a looking-through camera in infrared, at the same time and with a single white-light source. This paper presents a laboratory implementation of the test method with some experimental results.

• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.102-107
• /
• 2017

This study focuses on the effect of the elasticity modulus of jig material on blade edge shape in the grinding process of a sapphire medical knife. The ELID grinding process was applied as the edge-grinding method for sapphire material. Carbon steel and copper have been selected as the hard and soft jig materials, respectively. The blade edge created by ELID grinding was measured by a surface roughness tester and optical microscope. The shape of the ground edge and surface roughness were compared using the measurement results. As a result, it was found that chipping in the blade edge of the sapphire knife occurred more than in the case of jig material with a high-elasticity modulus because of the high normal force in the grinding process. Moreover, the maximum height surface roughness, $R_{max}$,of the ground surface was higher in the case of the jig material with a high-elasticity modulus due to the difference in elasticelongation. It was considered to lead to chipping from the notch effect.

• 한국안전학회지
• /
• 제20권1호
• /
• pp.62-67
• /
• 2005

An eccentrically-loaded single edge crack tension specimen (ESET) is similar to a compact tension(CT) specimen loaded in tension-tension. The standard ESET specimen exhibits advantages over other types of cracked specimen, such as n, single-edge crack, and middle-crack tension specimen. The details of ESET specimen configuration, test procedure, and calculations are described in ASTM E647 standard. However, a difficulty in attaching COD gage to the knife-edge on the front foe of the specimen can be found when the size of ESET specimen is small for rapid cooling and heating in thermal fatigue testing. The finite element analysis is performed for the ESET specimen with projected knife-edge on the front foe and a crack-length-compliance equation is suggested for the new specimen configuration. Calibration test are conducted with 347 stainless steel to compare the measured crack length with the calculated crack length from the suggested compliance expression. The test results showed good agreements with those of analysis.

• 한국전자파학회논문지
• /
• 제10권3호
• /
• pp.412-418
• /
• 1999

기하학적 균일 회절 이론 (Uniform Geometrical Theory of Diffraction)을 이용하여 옵\ulcorner 파라볼릭 안테나의 산란 특성을 분석하였다. 먼저 파추적법(Ray Tracing)에 의하여 음영경계를 나눈후, 각 영역에 존재하는 반사파와 회절파를 기하학적 균일 회절 이론을 이용해 구하였다. 또한, 옵\ulcorner 파라볼릭 안테나의 모서리(edge)의 형태가 전자파의 산란 특성에 미치는 영향을 알아보기 위해 knife 모서리인 경우와 원형 캡을 부착한 경우를 분석하여 비교하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.233-236
• /
• 2003

In this paper, we propose a method to search the evidence such as a knife found in the crime scene based on GHT from an image database Such objects like knives are simitar in shape. The proposed method utilizes the small shape differences among objects as much as possible to distinguish an object from similar shaped objects. It consists of the GHT based candidate generation and top-down candidate verification. For the fast generation of the candidate 1ist, the GHT operation is performed un the down sampled edge list. The test results show that it can retrieve the correct object even with a pan of object in reasonable time.

• 대한원격탐사학회지
• /
• 제27권5호
• /
• pp.573-586
• /
• 2011

MTF(modulation transfer function)는 광학 시스템의 성능을 평가하기 위하여 사용되는 중요한 파라미터 중 하나이다. 또한 열악한 우주 환경(방사능, 극한 열조건 및 전자기장 등), 대기 영향 및 시스템 성능의 저하 등으로 저하된 영상품질을 복원시켜주기 위한 파라미터로 사용될 수도 있다. 본 논문에서는 소형 지구관측위성인 DubaiSat-1이 발사된 후, 위성영상의 품질을 평가하기 위하여 MTF를 측정하였다. 일반적으로 MTF는 point source 혹은 knife-edge 방법 등과 같은 다양한 방법을 이용하여 측정되어왔다. 그러나 본 논문에서는 ISO에서 line source에 의한 MTF 측정을 표준화한 slanted-edge 방법을 이용하여 MTF를 측정하였다. Slanted-edge 방법은 전자 스틸 카메라(electronic still-picture camera)의 MTF를 측정하기 위한 ISO 12233 표준으로써, 라인스캐닝 망원경(line-scanning telescope)의 MTF를 추정하기 위하여 사용된 방법이다. 또한 PSF(point spread function) 기반으로 제작된 MTF 회선 커널(MTF convolution kernel)에 의한 MTF 보상(MTF compensation)과 영상의 노이즈 제거(image denoising)를 수행하여 영상의 품질 저하(degradation)를 완화시켰다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2011년도 제43차 동계학술발표논문집 19권1호
• /
• pp.185-188
• /
• 2011

In order to estimate spatial charging process in the corona charging which has been used to make polymer electret, the electrical properties of polypropylene film were obtained from Thermally Stimulated Current(TSC) measurements after corona charging between knife electrode and cylinder electrode with the voltages of -5, -6, -7 and -8[kV], respectively. And then the electrostatic contour and the electric field vector were also simulated by using Finite Element Method(FEM). The edge effect around edge of knife electrode affected the electrostatic contour on surface of specimen and the electric field concentration inside specimen. The uneven charging state in the electret due to the mistake on design could be calculated and so the optimal design of corona charging device which is appropriate to various materials is come to be practicable.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 제2회 학술대회 논문집 일렉트렛트 및 응용기술전문연구회
• /
• pp.68-72
• /
• 2000

In order to estimate spatial charging process in the corona charging which has been used to make polymer electret, the electrical properties of polypropylene film were obtained from Thermally Stimulated Current (TSC) measurements after corona charging between knife electrode and cylinder electrode with the voltages of -5, -6, -7 and -8[kV], respectively. And then the electrostatic contour and the electric field vector were also simulated by using Finite Element Method (FEM). The edge effect around edge of knife electrode affected the electrostatic contour on surface of specimen and the electric field concentration inside specimen. The uneven charging state in the electret due to the mistake on design could be calculated and so the optimal design of corona charging device which is appropriate to various materials is come to be practicable.