• Journal of Welding and Joining
• /
• 제23권1호
• /
• pp.7-10
• /
• 2005

• 한국표면공학회지
• /
• 제41권6호
• /
• pp.255-263
• /
• 2008

Generally, deposition mechanism of diamond particle is mainly embedding effect in the kinetic spray process. Accordingly, in spite of high cost, helium gas was employed as process gas to get high diamond fraction in the composite coating. In this study, the deposition behavior of bronze/diamond by kinetic spray process was compared using different process gas (helium and nitrogen). Bare (mean size of $5{\mu}m$, $20{\mu}m$) and nickel coated diamond (mean size of $26{\mu}m$) were deposited on Al 6061-T6 substrate with fixed process temperature and pressure. For comparison with experimental results, plastic deformation behavior of nickel layer was simulated by finite element analysis (using ABAQUS/Explicit 6.7-2). The size, broken ratio, and fraction of diamond in the composite coating were analyzed through scanning electron microscopy and image analysis method. The uniform distribution and deposition efficiency of diamond particles in the coating layer could be achieved by tailoring the physical properties of the feedstock.

• 조형예술학연구
• /
• 제8권
• /
• pp.267-296
• /
• 2005

Typography, as the median for communication, has expanded its roles according the attributes of the media where it Is used, and the change of media follwing the change of times is presenting new directions to the field of typography. The attempts of 20C experimental typography prioritize visual formativeness, free typography and language started to appear on printed matters and different kinds of prints put pep in magazines. Thus, experiments in the aspects of effective delivery of inpormation that letters have and aesthetic side of shapes of letter are continuing. Today with the appearance of multimedia, development of visual colture and rapid development of digital technology, the range of experimental typography has expanded even wider and therefore, different kinds of expressions became possible. As seen above, unlike the existing static printed media that carries linguistic information only, letters in the multimedia environment is shown in the movie titles, TV or web not only as a basic visual media such as type and image, but as a dynamic and complex factor that contains additional information of motion and sound factor. This study will attempt to find the historic context of focus of moment from the kinetic art and define the moving letters as kinetic typography. Therefore, this paper will have an understanding on kinetic typography's background, concept and characteristics following the change of communication environment in the multimedia era and tried to study the basic theories of kinetic typography and the information delivery and imagery function of letters. Also, this paper attempted to carry out a study on whether kinetic typography is delivering information smoothly from the aspect of communication through the image role as delivering information by studying major works of artists who have influenced kinetic typography. Based on this study, I would like to suggest new direction for effective delivery of information and value of use.

• 한국재료학회지
• /
• 제24권2호
• /
• pp.98-104
• /
• 2014

Vacuum kinetic spray(VKS) is a relatively advanced process for fabricating thin/thick and dense ceramic coatings via submicron-sized particle impact at room temperature. However, unfortunately, the particle velocity, which is an important value for investigating the deposition mechanism, has not been clarified yet. Thus, in this research, VKS average particle velocities were derived by numerical analysis method(CFD: computational fluid dynamics) connected with an experimental approach(SCM: slit cell method). When the process gas or powder particles are accelerated by a compressive force generated by gas pressure in kinetic spraying, a tensile force generated by the vacuum in the VKS system accelerates the process gas. As a result, the gas is able to reach supersonic speed even though only 0.6MPa gas pressure is used in VKS. In addition, small size powders can be accelerated up to supersonic velocity by means of the drag-force of the low pressure process gas flow. Furthermore, in this process, the increase of gas flow makes the drag-force stronger and gas distribution more homogenized in the pipe, by which the total particle average velocity becomes higher and the difference between max. and min. particle velocity decreases. Consequently, the control of particle size and gas flow rate are important factors in making the velocity of particles high enough for successful deposition in the VKS system.

• 한국재료학회지
• /
• 제24권1호
• /
• pp.60-65
• /
• 2014

Fe-based amorphous coatings were fabricated on a soda-lime glass substrate by the vacuum kinetic spray method. The effect of the gas flow rate, which determines particle velocity, on the deposition behavior of the particle and microstructure of the resultant films was investigated. The as-fabricated microstructure of the film was studied by field emission scanning electron microscopy (FE-SEM) and high resolution transmission electron microscopy (HR-TEM). Although the activation energy for transformation from the amorphous phase to crystalline phase was lowered by severe plastic deformation and particle fracturing under a high strain rate, the crystalline phases could not be found in the coating layer. Incompletely fractured and small fragments 100~300 nm in size, which are smaller than initial feedstock material, were found on the coating surface and inside of the coating. Also, some pores and voids occurred between particle-particle interfaces. In the case of brittle Fe-based amorphous alloy, particles fail in fragmentation fracture mode through initiation and propagation of the numerous small cracks rather than shear fracture mode under compressive stress. It could be deduced that amorphous alloy underwent particle fracturing in a vacuum kinetic spray process. Also, it is considered that surface energy caused by the formation of new surfaces and friction energy contributed to the bonding of fragments.

• Journal of Welding and Joining
• /
• 제25권4호
• /
• pp.35-41
• /
• 2007

In kinetic spraying process, the critical velocity is an important criterion which determines the deposition of a feedstock particle onto the substrate. In other studies, it was experimentally and numerically proven that the critical velocity is determined by the physical and mechanical properties and the state of materials such as initial temperature, size and the extent of oxidation. Compared to un-oxidized feedstock, oxidized feedstock required a greater kinetic energy of in-flight particle to break away oxide film during impact. The oxide film formed on the surface of particle and substrate is of a relatively higher brittleness and hardness than those of general metals. Because of its physical characteristics, the oxide significantly affected the deposition behavior and critical velocity. In this study, in order to investigate the effects of oxidation on the deposition behavior and critical velocity of feedstock, oxygen contents of Al feedstock were artificially controlled, individual particle impact tests were carried out and the velocities of in-flight Al feedstock was measured for a wide range of process gas conditions. As a result, as the oxygen contents of Al feedstock increased, the critical velocity increased.

• 대한물리의학회지
• /
• 제9권2호
• /
• pp.223-231
• /
• 2014

PURPOSE: The aim of this study was to investigate the effect of closed and open kinetic exercises on knee extensor strength and balance in patients with early stroke. METHODS: Thirty patients with early stroke participated in the study. Participants were randomly assigned to three groups: an open kinetic chain (OKC) exercise group (n=10), a closed kinetic chain (CKC) exercise group (n=10), and a control group (n=10). All participants received conventional physical therapy for 30 minutes. In addition, the two experimental groups (OKC and CKC) participated in a 30-minute knee strengthening training program. Training for the experimental groups was carried out three times a week for four weeks. Outcomes such as knee extensor strength and balance ability (Tetrax, Functional Reaching Test, Timed Up and Go Test) were measured before and after training. RESULTS: There were significant differences in knee extensor strength and balance ability between the pre- and post-treatment of all groups (p<.05). The improvement of knee extensor strength was significantly higher in the OKC group than in the other groups (p<.05), and the improvement of dynamic balance was significantly higher in the CKC group than in the other groups (p<.05). CONCLUSION: These results showed that both open and closed kinetic chain exercises are effective in the improvement of knee extensor strength and balance ability. This study suggests that open and closed kinetic exercise training is an effective training for strength and balance in patients with early stroke.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권5호
• /
• pp.617-623
• /
• 2003

In the present study, the characteristics of upward bubble flow were experimentally investigated in a liquid bath. The velocity of upward bubble flow was calculated for two different experimental conditions：1) bubble flow without kinetic energy 2) bubble flow with kinetic energy. Bubble flow without kinetic energy starts to undergo the effect of buoyancy l0cm away from the nozzle. Whereas. kinetic energy is dominant before 30 cm away from the nozzle in bubble flow but after this point kinetic energy and inertial force are applied on bubble flow at the same time In addition, as the flow rate increases the maximum velocity point moves to the nozzle. The velocity Profiles near free surface is extremely irregular due to surface flow. Gas volume fraction is high near the nozzle due to gas concentration. but decreases with the increasement of axial position. Gas volume fraction does not vary after the axial position, z=60 in spite of the increasement of flow.

• 물과 미래
• /
• 제27권4호
• /
• pp.49-57
• /
• 1994

하수와 우유를 섞은 합성폐수를 처리하기 위해 회전매체를 이용한 완전혼합활성슬러지 공법의 kinetic constant 값을 산정한 결과, $K_{m}$(유기물제거속도) 값은 저부하의 경우는 3.75~8/hr, 고부하인 경우는 8.57~12.5/hr이며, $K_{e}$값은 저부하인 경우 0.007~0.03/hr, 고부하인 경우는 0.09/hr로, $K_{s}$(내호흡계수) 값은 저부하인 경우 1.73~3.68/hr, 고부하인 경우는 3.84~5.75/hr로 나타났으며, Y 값은 0.46gVSS/g$BOD_{5}$로 산정 되었다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권6호
• /
• pp.587-592
• /
• 2005

Hydrolyzates from lignocellulosic biomass contain a mixture of simple sugars; the predominant ones being glucose, cellobiose and xylose. The fermentation of such mixtures to ethanol or other chemicals requires an understanding of how each of these substrates is utilized. Candida lusitaniae can efficiently produce ethanol from both glucose and cellobiose and is an attractive organism for ethanol production. Experiments were performed to obtain kinetic data for ethanol production from glucose, cellobiose and xylose. Various combinations were tested in order to determine kinetic behavior with multiple carbon sources. Glucose was shown to repress the utilization of cellobiose and xylose. However, cellobiose and xylose were simultaneously utilized after glucose depletion. Maximum volumetric ethanol production rates were 0.56, 0.33, and 0.003 g/L h from glucose, cellobiose and xylose, respectively. A kinetic model based on cAMP mediated catabolite repression was developed. This model adequately described the growth and ethanol production from a mixture of sugars in a batch culture.