• Geomechanics and Engineering
• /
• 제20권1호
• /
• pp.43-54
• /
• 2020

The limit analysis and response surfaces method were combined to investigate the reliability of pressurized tunnel faces subjected to seismic force. The quasi-static method was utilized to introduce seismic force into the tunnel face. A 3D horn failure mechanism of pressurized tunnel faces subjected to seismic force was constructed. The collapse pressure of pressurized tunnel faces was solved by the kinematical approach. The limit state equation of pressurized tunnel faces was obtained according to the collapse pressure and support pressure. And then a reliability model of pressurized tunnel faces was established. The feasibility and superiority of the response surfaces method was verified by comparing with the Monte Carlo method. The influence of the mean of soil parameters and support pressure, variation coefficients, distribution type and correlation of c-φ on the reliability of pressurized tunnel faces was discussed. The reasonable safety factor and support pressure required by pressurized tunnel faces to satisfy 3 safety levels were presented. In addition, the effects of horizontal seismic force, vertical seismic force and correlation of k_h-k_v on the reliability of pressurized tunnel faces were also performed. The method of this work can give a new idea for anti-seismic design of pressurized tunnel faces.

• 대한의용생체공학회:의공학회지
• /
• 제24권3호
• /
• pp.209-215
• /
• 2003

본 연구에서는 지면반발력에 저항하는 족부관절의 기구학적 특성과 운동학적 특성 사이의 관계를 고찰하는 것을 목적으로 하였다. 관절의 수동탄성모멘트와 각변위는 3대의 카메라와 지면반발력 측정기를 이용한 실험을 통하여 얻어졌다. 최소자승법을 이용하여 관절의 각변위와 모멘트의 상관 관계를 수학적으로 모델링 하였다. 관절의 운동 범위(range of motion)는 중족지절관절(metatarsophalangeal joint)을 제외하고는 5$^{\circ}$~7$^{\circ}$ 값을 보였다. 이 모델을 이용하여 지금까지 일반적인 모션 분석으로부터 측정할 수 없었던 족부관절의 기구학적 데이터를 얻을 수 있다. 더 나아가 이러한 수학적은 보행을 시뮬레이션 하는 생체 역학적 모델과 임상적 평가에도 적용 가능하다.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.109-117
• /
• 2006

The purpose of this study was done in order to investigate the Kinematical variables of the Rybalko motion on the Horizontal bar using the 3-dimensional cinematographic method. For this study, three excellent athletes take part in a 2003 Daegue universid game were chosen. The subject,s Rybalko motion was filmed with S-VHS camera at the speed of 60 fields per second and digitized the each fields. And the Kwon3D 3.1 version program was employed to obtain 3-dimensional data. As a result of this study. 1. A total time spent for performing Rybalko skill was Mean $2.52{\pm}0.13sec$. From starting down swing to releasing right hand the Mean $0.84{\pm}0.24sec$ was taken. 2. In the event 3 of Rybalko motion, that is, the moment which the right-hand is released on the bar, the center of mass must is employed at the position above the horizontal line of bar. In this research, the average vertical displacement(z axe) of center of mass shows $47.87{\pm}3.14cm$. 3. In the event 5, that is, the moment which the right-hand is catched again on the bar, the center of mass is employed at the position before the vertical line of bar. In this research, the average horizontal displacement(z axe) of center of mass shows $47.87{\pm}3.14cm$. 4. It has been seen that, at the moment of release of right-hand, lateral variation of center of mass is 13.395cm, vertical variation of center of mass is 7.41cm Thus, it is concluded that lateral variation of center of mass should be reduced for high grade to be acquired. 5. It has been founded that high speed of down swing influences speed of up swing, and that, in the motion of twist, the horizontal speed is little changed.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.181-189
• /
• 2005

To know the proper impact posture and changes for the various clubs, changes of impact variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed video cameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. Major findings of this study were as follows. 1. Lateral position of the head remained more right side of the target up to 3.5cm compared to the setup as the length of the club increased. 2. Left shoulder raised up to 5cm and right shoulder lowered up to 2.5cm compared to setup. The shoulder line opened slightly (maximum 11 degrees) to the target line. 3. Forward lean angle of the trunk decreased up to 4 degrees (more erected) compared to setup. 4. Side lean angle of the trunk increased compared to setup and increased up to 16 degrees as the club length increased. 5. The pelvis moved to the target line direction horizontally and opened up to 31 degrees. Right hip moves laterally to the grip position at the setup. 6. Flexion of the left leg maintained almost constantly but the right leg flexed up to 11 degrees compared to setup. 7. Left arm is straightened but the right arm flexed about 20degrees compared to straight. 8. Center of the shoulders were in front of the knees and toes of the feet. 9. Hands moved to the left (8.7cm), forward (5.7cm) and upward (11.6cm) compared to the setup. This is because of the rotation of pelvis and shoulders. 10. Shaft angle to the ground was smaller than the lie angle of the clubs but it increased close to the lie of the clubs at impact.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.99-109
• /
• 2007

The purpose of the study is to examine the effect of the spring shoe through the comparison of spring shoe to general shoe. For this, 12 healthy females in the age from 20 to 30 years participated in the E.M.G. experiment with testing kinematic variables. Results indicated that there was significant differences in angle of ankel between the general and spring shoe. Specifically, the spring shoe showed a bigger angle of take on and a smaller angle of take off in walking than the general shoe. This mesns that the spring shoe does not have a significant effect to produce efficient and smooth walking. In addition, the spring shoes revealed a bigger rear-foot angle than the general shoe in the evaluation of rear-foot control function. This means that the rear-foot control function of the spring shoe is low compared to trhe general shoe. Meanwhile, there is no significant differences in angle of knee and angle of Achilles tendon between both shoes. In an analysis of E.M.G., the significant differences were found in gastrocnemius muscle, anterior tibial musculi, musculi rectus femoris, biceps muscle of thigh between both the general and spring shoe groups by the section. In the case of gastrocnemius muscle, the spring shoe showed a low muscle production of anterior tibial musculi than the general shoe. This is a result from structural nature of the sole of a foot of the spring shoe. The spring shoe performs a rolling movement through slightly large pronation toward front-foot from rear-foot in supprt time before taking-off of toe and the power for this movement is mainly produced from musculi rectus femoris.

• 한국운동역학회지
• /
• 제13권2호
• /
• pp.49-63
• /
• 2003

For this study, four male university Taekwondo players were randomly chosen, between the weight categories of 60Kg and 80Kg. Their side kicks (yeop chagi), which are part of foot techniques, were kinematically analyzed in terms of the time, angle, and angular velocity factors involved with the kicks through the three-dimensional imaging. The results of the analysis are as fellows. 1. Time factor The first phase(preparation) was 0.48sec on average, accounting for 60% of the entire time spent; the second phase(the minimum angle of the knee joint) was 0.21sec on average, taking up 26% of the whole time spent; and the third phase(hitting) was 0.11sec on average, representing 14% of the entire time spent. 2. Angle factor In the first phase(preparation), rotating their bodies along the long axis, the players bended their hip and knee joints a lot, by moving fast in the vertical and horizontal directions, in the second phase(the minimum angle of the knee joint), the players continued to extend their bodies along the vertical axis, while pronating their lower legs and bending their hip and knee joints a lot to reduce the radius of gyration, and in the third phase(hitting), they extended their knee joints greatly so that the angle movements of their lower bodies shifted to circle movements. 3. Angular velocity factor In the first phase(preparation), the angular velocity of the hip and knee joints increased. while moving horizontally and rotating the body along the long axis; in the second phase(the minimum angle of the knee joint), the angular velocity increased by bending the hip and knee joints fast to reduce the rotation radios; and in the third phase(hitting), the angular velocity was found to have increased, by rotating the body along the long axis to increase the angular velocity and shifting the angular momentum of the pronated knee joint to the circular momentum.

• 한국운동역학회지
• /
• 제12권2호
• /
• pp.345-359
• /
• 2002

투창동작시 투창의 투사속도, 투사높이, 투사각도, 공기의 저항 등은 창의 수평거리와 궤적 등에 영향을 미치는 주요 요인으로, 본 연구에서는 투창의 던지기 동작시 선수들의 움직임을 정량적으로 분석하여 선수지도에 기초자료를 제공하고자 하는데 그 목적을 두었다. 이를 위해 제65회 전국육상경기 선수권대회 및 2002년 아시아게임 선발전경기의 상위 입상자 3명을 대상으로 힘발이 지면에 착지하는 순간부터 지지발이 지면에 착지하는 순간과 창이 손으로부터 릴리즈 되는 순간까지를 3차원 분석을 통하여 운동학적 변인을 분석하여 다음과 같은 결론을 얻었다. 선수들은 창을 뒤로 젖히고 크로스 스텝하는 동안 수평속도가 떨어지지 않도록 해야 할 것으로 사료되며, 릴리즈시 투사요인의 투사높이는 평균 $84{\pm}3.3%$, 투사각도는 평균 $38.7{\pm}1.9$도를 투사속도는 $15.6{\pm}3.4m/s$를 나타내었으며, 우수한 기록을 보인 S2는 투사높이는 가장 크게 나타났으나, 투사속도는 다른 선수에 비해 작은 것으로 나타났다. 또한 릴리즈시의 전경각에서 S2는 85도로 적절한 자세를 취하고 있으나, S1은 72.4도로 너무 자세를 낮추어 창의 릴리즈 속도 증가를 방해하는 것으로 사료되며, 투사순간의 신체분절속도에서 S2의 경우 타선수에 비해 신체중심과 상완, 전완의 속도가 빠르게 나타났으나, S1과 S3는 투사속도와 직접관련이 있는 전완의 속도를 좀더 증가시켜야 할 것으로 사료되며, 동작 수행시간에서 S2는 0.30초로 다른 선수에 비해 소요시간이 가장 빠르게 나타나 있고, 전체적으로 투사구간의 소요시간이 짧을수록 투사거리가 증가하는 것으로 나타났다. S1과 S3는 투사시간을 단축하여야 할 것으로 사료된다. 이상의 결론에 의하면, 앞으로 투창 동작시 선수 및 지도자들은 크로스 오버하여 지지발을 축으로 하여 투창이 투사될 때까지 적절한 상체각도, 고관절각도, 무릎각도 유지 및 투사시 창의 투사각도와 투사높이, 투사속도를 적절히 조절하는데 초점을 두어야 할 것으로 사료된다.

• 한국운동역학회지
• /
• 제18권1호
• /
• pp.53-62
• /
• 2008

본 연구는 플랫폼 다이빙 종목 205B를 3차원 영상분석을 통하여 운동학적 분석을 하였다. 총소요시간은 평균 $1.112{\pm}0.12s$로 나타났으며 여유 있는 연기를 수행하기 위해 많은 소요시간을 확보하여야 할 것으로 사료된다, 이지시 신체중심의 높이는 평균 88.8cm이며 수평거리는 144.8cm, 수평, 수직속도는 평균 1.08m/s, 1.3m/s로 나타났으며, 회전동작은 높은 위치에서 수행해야 하며, 수평거리는 짧아야 입수자세에 유리 할 것으로 판단된다. 하지분절의 속도변화는 이지 시 속도가 감소한 이후 회전이 이루어지는 시점까지 상승하며 이지 순간에는 회전보다는 점프동작에 더 큰 영향을 미치며, 신체중심을 축으로 회전동작으로 이어지고 속도가 상승하는 것으로 판단된다. 몸통각속도는 이지 시에 크게 나타났는데, 이는 상 방향으로 점프하여 회전에 필요한 힘을 얻기 위해 상체분절을 최대한 곧게 펴고 신체중심을 높게 유지하여 도약을 해야 효과적인 동작을 수행 할 수 있기 때문으로 사료된다.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.119-127
• /
• 2005

The purpose of this research helps to make full use for perfect performance by grasping the defects of Ropez motion performed by athlete CSM who was under the training for the 28th 2004 Athene Olympic Garnes, and by presenting complementary methods. For the better Ropez motion which had been performed by CSM for the 1st dispatch selection test and the final for the 28th Athene Olympic Game was analyzed with 3-dimensional cinematographic method. Here are the conclusions: 1. During the board contact phase, powerful kicking and rapid forward flexion motion of upper body make increasing vertical velocity of C. O. G and enlarging body angle. 2. It was indicated that rapid forward flexion motion of upper body during the board contact phase get a large body angle in horse take-off. 3. rapid forward flexion motion of upper body during the board contact phase makes a longer time at horse contacting phase. It showed that this result increased velocity of horse take-off causing by powerful blocking motion. 4. Increasing of air-borne height during pre- flight phase, makes a higher C. O. G; and larger angle of hip, angle of knee and body angle in the landing phase. And it revealed that these results have a stable landing.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.133-149
• /
• 2003

The purposes of present study were to determine the major check-points of golf swing from the review of previous studies, and to suggest additional information on the teaching theory of golf. The golf swing motion of 6 male and female elite university golf players were filmed with 16mm Locam II high speed cameras at the speed of 200f/s, and variables such as time, displacement, angle, velocity were calculated and analyzed by 3D Cinematography using DLT method. The results were: 1. Differences were shown in the ratio of weight distribution on the feet, cocking angle, take-back velocity, club-head velocity at impact depending upon the physical characteristics and club used for swing. 2. Time for the down-swing and impact were $0.27{\sim}0.29s$ in men and $0.29{\sim}0.32s$ in women, which was 1/3 of the time for the back-swing. Women showed longer total swing time than men because of longer time in back-swing, follow-through and finish. 3. Men showed larger range of motion in shoulder and knee joints than women, on the other hand women showed larger range of motion in hip joint than men. 4. Cocking motion and right elbow flexion were occurred at the top of back-swing and cocking release was occurred at the moment of impact. Maximum rotations of shoulder and hip joints were found between the top of back-swing and down-swing phase. 5. Women showed lower back-swing velocity than men, and men showed higher club velocity(men: $38.2{\sim}38.6m/s$, women: $35.1{\sim}36.4m/s$) than women.