• 마이크로전자및패키징학회지
• /
• 제27권4호
• /
• pp.127-133
• /
• 2020

고분자 재료인 접착제와 금속 피착재 사이의 정량적인 접착강도 측정은 중요하다. 고분자 재료인 접착제와 금속 피착재 사이의 접착강도 측정 시, 피착재의 종류와 두께 변화가 접착강도에 미치는 영향에 대해 연구하였다. 금속 피착재의 종류로는 알루미늄과 스텐리스강 2종류가 선택되었으며, 접착강도의 측정에는 돌리테스트와 전단시험이 사용되었다. 인장응력 방식의 돌리테스트로 고분자 접착제와 금속 피착재 사이의 접착강도 측정 시, 금속 피착재의 두께 변화는 접착강도의 크기에 거의 영향을 미치지 않았으나, 피착재의 종류에 따라 접착강도는 다르게 나타났다. 반면, 전단시험으로 고분자 접착제와 금속 피착재 사이의 접착강도 측정 시, 금속 피착재의 상대적 두께 변화는 접착강도의 크기에 영향을 주었다. 이유는 전단시험 시 접착부의 모서리 부분에서 발생하는 피착재의 휘어짐 현상은 접착부에 추가적인 인장응력을 발생시켜 접착강도를 낮추는데 기여하기 때문이다. 이 연구의 결과, 돌리테스트는 피착재의 두께가 변해도 접착강도의 변화가 거의 없기 때문에 고분자 접착제와 금속 피착재의 정량적인 접착강도 측정 시 널리 사용될 것으로 예상된다.

• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.643-648
• /
• 2004

Most of shoes manufacturing processes are not yet automated, which puts restrictions on the increase of productivity. Among them, adhesive application processes particularly are holding the most workers and working hours. In addition, its working conditions are very poor due to the toxicity of adhesive agents. In case of automating adhesive application processes by using robots, the robot teaching by playback is difficult to produce high productivity because the kinds of shoes to be taught mount up to several thousands. Therefore, it is essential to generate the robot working paths automatically according to the kind, the size, and the right and left of shoes, and also to teach them to the robot automatically. This study deals with automated adhesive spraying to shoe outsoles and uppers by using a robot, and develops the program to generate three-dimensional robot working paths off-line based on CAD data. First, the three-dimensional data of an outsole outline or an upper profiling line are extracted from the two-dimensional CAD drawing file or the three-dimensional scanner. Next, based on the extracted data and the nozzle conditions for adhesive spraying, a robot working path is generated automatically. This research work is the core in automating adhesive spraying processes, and will do much for increasing productivity of shoes manufacturing.

• 접착 및 계면
• /
• 제19권4호
• /
• pp.167-172
• /
• 2018

본 연구에서는 폴리우레탄 핫멜트 접착제를 합성 후, 유도가열에 감응하는 금속 입자를 첨가하여 유도가열 melt형 접착제를 제조하고, 금속입자의 종류 및 크기, 유도가열 조건에 따른 열적 거동 및 접착특성을 연구하였다. 다양한 금속입자 중에서 iron 및 nickel 적용 시, 유도가열 효율이 가장 우수하였으며, 금속 입자의 크기가 작을수록 유도가열 효율이 향상되었다. 또한 접착제의 유도가열 출력 세기가 높고, 접착제 두께가 얇을수록 접착강도가 향상되었다.

• 한국가구학회지
• /
• 제10권1호
• /
• pp.65-71
• /
• 1999

The bending performance of sloped finger-jointed Rhus verniciflua were tested in order to improve the strength properties of finger-joint. Sloped finger-cut pieces were jointed with three kinds of adhesives (polyvinyl acetate, polyvinyl-acryl acetate and oilic resin). The slope ratios of finger joints were 0, 1.0, 1.5, and 2.0. The MOE, MOR and deflection to maximum load in bending of sloped finger-joints and solid wood specimen were measured. The results were : 1) The efficiencies of MOE to finger and sloped finger-joints to the solid wood were almost same in the three kinds of adhesives(polyvinyl acetate, polyvinyl-acryl acetate and oilic urethane resin) and there were some effect of slope on the MOE in a sloped finger-joint for three kinds of resin adhesives. 2) There was the effect of slope on the MOR in sloped finger-joints in every kind of adhesive. The efficiencies of MOR in slope ratios of 0 and 2.0 ranged 65-79%, respectively. There was also a slight effect of the kinds of adhesives on the MOR. However, the efficiencies of deflection to the urethane resin adhesive were much less than those of polyvinyl acetate, polyvinyl-acryl acetate resin adhesives except the slope ratio of 0. 3) It might be impossible to estimate the bending stregth of sloped finger-jointed Rhus verniciflua by using MOE. The correlation coefficient(0.192) between MOE was very low and not significant at 5% level.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.153-154
• /
• 2020

This study aims to find out the reason that tile adhesive(type III) for ceramic tile does not harden under some conditions especially high humidity even though long curing time. Bonding strength of adhesive between substrate and ceramic tile is evaluated depending on bonding conditions such as substrate kind(concrete, board), bonding material (tile adhesive, tile cement) and curing condition(humidity 50, 70%). Based on the results, this study aimed to establish the quality of tile adhesion strength under the relevant conditions.

• 한국CDE학회논문집
• /
• 제14권2호
• /
• pp.122-128
• /
• 2009

The failure responses of adhesively bonded, hat stiffened structures are studied through numerical analysis using the finite element method. The responses are evaluated numerically for the bonded hat section/substrate structures containing different combinations of materials. It is studied what kind of material combinations causes the easier crack initiation in the structure. This study is conducted under plane strain conditions and J-integral via a commercial code ABAQUS as a total critical energy release criterion was used for observation on crack initiation. Also, the influence of adhesive on the structure is studied.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.61-67
• /
• 1997

The bending performances of sloped finger-joints in Pinus densiflora S. et Z. were tested in order to improve the strength properties of finger-joint Sloped finger-cut pieces were jointed with four kinds of adhesives(resorcinol-phenol, oilic urethane, polyvinyl acetate, and polyvinyl-acryl acetate resin). The slope ratios of finger joints were 0, 0.5, 1.0, 2.0. The MOE, MOR and defletion to maximum load in bending of sloped finger-joints and solid wood specimen were measured. The results were: 1. The efficiencies of MOE to finger and sloped finger-joints were 82% or greater in every kind of adhesives except polyvinyl-acryl acetate resin adhesive and there were some effect of slope on the MOE in a sloped finger-joint for polyvinyl-acryl acetate and oilic urethane resin adhesives. 2. The effects of slope on the MOR to sloped finger-joints were showed in every kind of adhesive, because the efficiencies of MOR increased with increasing slope ratio in sloped finger-joints. The efficiencies of MOR to slope ratios of 0 and 2.0 ranged 43~65% and 76~82%, respectively. There was almost no effect of the kinds of adhesives on the MOR to the slope ratio of 2.0. 3. It was found impossible to estimate the bending strength of sloped finger-jointed Pinus densiflora S. et Z. by using MOE. The correlation coefficient(0.124) between MOE and MOR was very low and not significant at 5% level.

• 한국가구학회지
• /
• 제12권2호
• /
• pp.1-10
• /
• 2001

As finger joint method has a high rate of yield and high strength and ease in working, it has been widely used as an end joint method for solid wood and wood based-material. Therefore, we end-joined the material of Pinus densiflora, Quercus variabilis and populus euramericana with polyvinyl acetate adhesive and resorcinol phenol resin adhesive. The effect of difference (0, 0.15, 0.3, 0.45mm) between the dimensions of tip width and root width of the finger (DTRW) on bending strength properties was as follows: 1. In the case of polyvinyl acetate adhesive, DTRW had no effect on bending modulus of elasticity(MOE) and modulus of rupture(MOR) of the three kinds of species, because their bonding layers were destroyed by slippage, not their woody parts. 2. In the case of resorcinol phenol resin adhesive, the material of Quercus variabilis showed an optimal result at 0.15 or 0.3 of DTRW, while the poplar did at 0 of DTRW 3. The differences in efficiency ratio of bending MOR of populus euramericana, Pinus densiflora and Quercus variabilis species according to the kind of adhesive were 13-29%, 23-30% and 45-53%, respectively.

• 접착 및 계면
• /
• 제9권4호
• /
• pp.12-16
• /
• 2008

핫멜트 접착제는 상온에서 고체상태로 존재하나 열에 의하여 활성화되어 지압 정도의 압력으로 접착이 가능하다. 또한 접착속도가 빠르고 공정의 자동화가 가능하며 친환경적인 장점을 가지고 있다. 본 연구에서는 SBS와 석유수지의 종류 및 이들의 조성비가 핫멜트 접착제의 물성에 미치는 영향을 알아보았다. 핫멜트 접착제의 스타이렌 함량 및 $C_9$계 석유수지의 함량이 증가함에 따라 점도, 인장강도, 접착력 및 내열성 등이 증가하는 경향을 나타내었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.179.4-179
• /
• 2001

Most of shoes manufacturing processes are not yet automated, it puts restrictions on increasing of productivity. Among them, adhesive application processes particularly are holding the most workers and working hours. In addition, its working conditions are very poor due to the toxicity of adhesive agents. In case of automating adhesive application processes by using robots, the robot teaching by playback is difficult to produce high productivity because the kinds of shoes to be taught mount up to several thousands. Therefore, it is essential to generate the robot working paths automatically according to the kind, the size, and the right and left of shoes, and also to teach them to the robot automatically ...