• 비파괴검사학회지
• /
• 제23권1호
• /
• pp.45-52
• /
• 2003

최근 터빈 로타 디스크 키웨이에서 많은 응력부식균열이 발견되었으며, 터빈설비의 중대한 파손을 예방하기 위해 이러한 균열은 조기에 검출 및 평가되어야 한다. 본 연구에서는 초음파탐상의 RF(radio frequency) 신호를 역전파 알고리즘에 근거한 신경회로망에 적용하여 키웨이 주변의 균열에 대한 위치, 크기 및 방향성을 평가하였다. 각 반사영역에서 수신된 여러개의 피크로 나타나는 RF 신호를 각 반사영역에 대해 하나의 최대 피크를 가지도록 처리한 후, 트랜스듀서의 위치 정보와 각 반사파의 도달시긴이 들어있는 주사 데이터를 작성하였다. 이 주사 데이터로부터 각 반사영역 사이의 시간차이와 트랜스듀서의 위치 정보를 신경회로망에 적용한 결과 키웨이에서 시작된 균열의 위치, 크기 및 방향성을 평가하는데 유용함을 알 수 있었다.

• 비파괴검사학회지
• /
• 제29권5호
• /
• pp.493-500
• /
• 2009

본 연구에서는 터빈 로터 디스크 키웨이에 발생하는 균열의 상세 정보를 추출하기 위하여 초음파 신호처리 알고리즘을 개발하였다. 초음파 검사 시스템에 의한 터빈 로터 디스크 키웨이 시험편의 초음파 신호로부터 B-주사 이미지를 구성하였다. 구성된 B-주사 이미지를 2차원 신호처리를 위한 입력영상으로 이용하여, 전처리, 균열후보영역 검출, 균열영역 판별 및 균열정보 추출의 4단계로 알고리즘을 구성하였다. 개발된 초음파 신호처리 알고리즘을 이용한 실험을 통하여, 개발된 알고리즘이 키웨이 부위에 발생하는 균열의 특징정보 추출에 의한 균열의 정량적인 평가에 효과적임을 확인하였다.

• 비파괴검사학회지
• /
• 제17권3호
• /
• pp.174-183
• /
• 1997

터빈 로타 디스크는 디스크, keyway, bore surface, hub, rim 등으로 구성되고 이들 부분이 전형적인 균열 발생 부위이다. 이러한 부위는 기하학적 형상이 복잡해 적절한 탐촉자의 선정, wedge 설계 및 가공, 검사체의 형상과 크기에 따른 정상신호와 결함신호의 분류 및 평가가 필요하다. 본 연구에서는 디스크 keyway 및 bore surface에 인공결함을 갖는 디스크 대비 시험편을 제작하여 구조, 형상별 초음파 신호를 수집하여 분석하였고 디스크 곡률에 따른 wedge를 설계, 제작하였다. 본 연구를 통하여 형상별 신호를 정의할 수 있었고 디스크부에 발생되는 결함을 검출하고 평가할 수 있는 초음파검사 기술을 확립하였다. 또한 현장 적용에 있어서 성공적인 결과를 입증하였다.

• Computers and Concrete
• /
• 제21권5호
• /
• pp.547-557
• /
• 2018

This paper measures the mechanical response of precast pavement joints under moving axle loads using the finite-element method, and the models were validated with results of field tests. In order to increase the ability to use the non-linear FE analysis for design and assessment of precast pavement subjected to moving axle load, this paper investigated the effects of different load transfer between the slabs using the ABAQUS finite-element package to solve the nonlinear explicit model equations. The assembly of the panels using dowels and groove-tongue keys has been studied to assess the efficiency of keyway joint system. Concrete damage plasticity model was used to calculate the effects of permanent damages related to the failure mechanisms. With aggregate interlock as the only load transferring system, Load transfer efficiency (LTE) is not acceptable when the axle load reaches to slab joints. The Finite-element modelling (FEM) results showed that keyway joints significantly reduced tensile stresses developed at the mid-slab. Increasing the thickness of the tongue the LTE was improved but with increasing the height of the tongue the LTE was decreased. Stresses are transferred to the adjacent slab efficiently when dowels are embedded within the model. When the axle load approaches joints, tensile damage occurs sooner than compressive damage, but the damage rate remains constant, then compressive damage increases significantly and become the major form of distress under the dowels.

• 비파괴검사학회지
• /
• 제18권3호
• /
• pp.163-171
• /
• 1998

터빈 디스크에서 발생하는 결함에 대한 초음파탐상기술을 확립하기 위하여 초음파탐촉자의 근/원거리 음장 및 지향성에 대하여 연구하였다. 영광원자력 LP터빈 No. 6 디스크와 동일하게 대비시험편을 제작하였고 터빈로타 디스크의 초음파탐상에 사용된 5MHz PZT 압전탐촉자의 직경에 따른 근/원거리 음장 및 지향성을 계산하고 실험을 통하여 확인하였다. 쐐기와 디스크로 구성된 실험계에서 bore면에 깊이 2mm 및 4mm 인공결함을 지닌 시편과 직경이 0.5inch이고 중심 주파수 5MHz인 초음파탐촉자를 이용하여 계산 및 실험을 수행하였고 그 결과를 비교, 분석하였다. Keyway 영역에 발생한 결함의 탐상능력을 평가하기 위하여 내부의 53mm 및 75mm 지점에 초음파탐촉자를 두고서 $45^{\circ}$ 및 $90^{\circ}$ 경사각 초음파탐촉자를 설치한 경우를 가정하여 결함의 탐상영역을 결정하였다.

• 대한치과보철학회지
• /
• 제34권1호
• /
• pp.101-124
• /
• 1996

In this study, we designed the finite element models of mandible with varying their connecting types between the prosthesis on implant fixture and 2nd premolar, which were free-standing case(Mf), precision attachment case(Mp), semiprecision attachment case(Ms) and telescopic case(Mt). The basic model of the designed finite element models, which contained a canine and the 1st & 2nd premolar, was implanted in the edentulous site of the 1st & 2nd molar by two implant fixtures. We applied the load in all models by two ways. A vertical load of 200N was applied at each central fossa of 2nd premolar and 1st implant. A tilting load of 20N with inclination of $45^{\circ}$ to lingual side was applied to buccal cusp tips of each 2nd premolar and 1st implant. And then we analyzed three-dimensional finite element models, making a comparative study of principal stress and displacement in four cases respectively. Three-dimensional finite element analysis was performed for the stress distribution and the displacement using commercial software(IDEAS program) for SUN-SPARC workstation. The results were as follows : 1 Under vertical load or tilting load, maximum displacement appeared at the 2nd premolar. Semiprecision case showed the largest maximum displacement, and maximum displacement reduced in the order of precision attachment, free-standing and telescopic case. 2. Under vertical load. the pattern of displacement of the 1st implant appeared mesio-inclined because of the 2nd implant splinted together. But displacement pattern of the 2nd premolar varied according to their connection type with prosthesis. The 2nd premolar showed a little mesio-inclined vertical displacement in case of free-standing and disto-inclined vertical displacement due to attachment in case of precision and semiprecision attachment. In telescopic case, the largest mesio-inclined vertical displacement has been shown, so, the 1st premolar leaned mesial side. 3. Under tilting load, The pattern of displacement was similar in all four cases which appeared displaced to lingual side. But, the maximum displacement of 2nd premolar appeared larger than that of the first implant. Therefore, there was large discrepancy in displacement between natural tooth and implant during tilting load. 4. Under vertical load, the maximum compressive stress appeared at the 1st implant's neck. Semiprecision attachment case showed the largest maximum compressive stress, and the maximum compressive stress reduced in the order of precision attachment, telescopic and free-standing case. 5 Under vertical load, the maximum tensile stress appeared at the 2nd implant's distal neck. Semiprecision attachment case showed the largest maximum tensile stress, and the maximum tensile stress reduced in the order of precision attachment, telescopic and free-standing case. 6. Under vertical load or tilting load, principal stress appeared little between natural tooth & implant in free-standing case, but large principal stress was distributed at upper crown and distal contact site of the 2nd premolar in telescopic case. Principal stress appeared large at keyway & around keyway of distal contact site of the 2nd premolar in precision and semiprecision attachment case, appearing more broad and homogeneous in precision attachment case than in semiprecision attachment case.

• 대한소아치과학회지
• /
• 제27권3호
• /
• pp.388-393
• /
• 2000

순 구개열(cleft lip and palate)은 구강악안면 영역에서 가장 빈번하게 발생하는 선천성 기형 중 하나로 유전적, 환경적 요인에 의해 발생된다. 순 구개열 환자는 입술, 코 등의 기형을 보이며 치과적 문제점으로, 이환측 측절치는 결손되어 있거나 과잉치가 존재하고 형태적 이상을 보이는 경우가 많고, 맹출하지 못하거나 이소맹출을 하게된다. 이른 시기에 수행된 수술의 반흔조직(scar tissue)으로 인하여 상악골 성장의 장애가 발생되어 흔히 골격성 III급 부정교합이 야기되기 쉬우며, 섭식장애와 발음장애를 보이기도 한다. 이러한 복잡한 문제로 인하여 여러 분야의 전문가들로부터 다양한 관리가 필요하다. 순/구개열(cleft lip and alveolus only)은 악안면 영역에 제한적으로 영향을 미친다. 비이환측은 전방으로 회전되어 수평피개가 증가되고, 이환측은 내측으로 회전되어 견치부에서 end to end 관계, 혹은 반대교합을 보인다. 순/구개열 수술은 이와 같은 문제점 등을 개선시키기 위한 것이며, 상악골의 전후방적 성장에는 큰 영향을 미치지 않는 것으로 보고되고 있다. 본 증례는 좌측에 순/구개열을 가진 5세 3개월의 여아로 생후 3개월 및 3세에 두 번의 구순열 봉합 수술을 받았으며, 상악 좌측 유측절치와 영구측절치가 결손되어 있었고, 다발성 우식증 및 비구누공(oroantral fistula)이 존재하였으며, 골격성 3급 부정교합을 보였다. 그러나 본 증례가 지니고 있는 골격성 III급 부정교합은 구순열 수술후의 반흔조직에 의한 것은 아닌 것으로 판단되었으며, 환자의 기능과 심미성을 회복하기 위하여 혼합치열기 동안 공간관리(space supervision) 및 악기능 장치 (functional regulator)를 이용한 골격성 부정교합을 치료하였으며, 영구치열기 동안 고정성 교정치료를 시행한 후 보철 치료를 시행하여 비구누공을 key and keyway attachment와 Konus crown을 이용한 가철성 obturator로 폐쇄하여 양호한 결과를 보였다.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.807-823
• /
• 1995

The purpose of this study was to analyze the stress distribution and the displacement happened to the abutment, the prosthesis, and the surrounding structure according to the location of the nonrigid connector, that is, the keyway in the distal of canine and the mesial of the implant in the three unit fixed partial denture. Two-dimensional finite element model ws constructed and analyzed for the stress distribution and the displacement using software ABAQUS(Ver 5.2 Hibbitt, Karisson & Sorenson, Inc., 1992). After finishing the finite element model, the distribution load of 15kg was applied simultaneously to the all cusp tips of the prosthesis and the concentration load of 10㎏ was applied respectively at the each cusp tip of the prosthesis. The following results were obtained : 1. The amount of displacement of the implant was greater in case of the non-rigid connection than the rigid connection, and the more favorable displacement was shown in case of the IKb than the IKa. 2. Without regard to the connection method, the stress represented at the surrounding bone was similar, and the more favorabel stress distribution was shown in case of IKb. 3. The maximum stress was concentrated at the fastening screw and the neck of implant in all experimental groups, and their stress magnitudes were in the order of IKb, IR, and IKa.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.130-143
• /
• 1995

The purpose of this study was to analyze the magnitude and distribution of stress using photoelastic model with the rigid connection using T-block attachment and non-rigid connection using key & keyway attachment. The vertical load of 16 Kg was applied on the central fossa of the tooth, the pontic and the implant, and the pattern and distribution under each condition was analyzed. The following results were obtained : 1. In case of vertical load on the central fossa of the implant, the stress was concentrated at the apex of the implant involving the mesial alveolar bone in both fixed partial denture with the rigid connection and that with the nonrigid connection and the stress concentration at the mesial cervical area of the implant was a little more in the nonrigid connection than in the rigid connection. 2. In case of vertical load on the central fossa of the pontic, the stress was concentrated at the apex of 2nd bicuspid in both 3 unit fixed partial denture with nonrigid connection and that with the rigid connection. The stress was more concentrated at the mesial alveolar bone of the implant, but the stress distribution at the natural teeth more favorable at the rigid connection than at the non-rigid connection in case of 4 unit fixed partial denture. 3. In case of vertical load of the central fossa of the 2nd bicuspid, much stress with 3 fringe order was observed at the apex of the 2nd bicuspid in the 3 unit fixed partial denture, but relatively even stress distribution was observed at the apex of the implant, the 1st and 2nd bicuspid, and the adjacent cuspid in the 4 unit fixed partial denture.

• 대한치과보철학회지
• /
• 제31권2호
• /
• pp.271-300
• /
• 1993

The purpose of this study was to analyze the stress distribution at supporting bone according to the types of connection modality between implant and tooth in the superstrcture. This investigation evaluated the stress patterns in a photoelastic model produced by three different types of dental implants such as Branemark, Steri-Oss, IMZ and resin tooth using the techniques of quasi three dimensional photoelasticity. The teeth-supported bridge had a first molar pontic supported by second premolar and second molar as a control group. The implant and toothsupported bridge had a first molar pontic supported by second premolar and implant posterior retainer as an experimental group. Prostheses were mechanically connected to an adjacent second premolar by the rigid of nonrigid connection, Nonrigid connection used an attachment placed between the tooth-supported and fixture-supported component. The female(keyway) of attachment was placed on the distal end of the retainer supported by the tooth ; the male(Key) of attachment connected to the osseointegrated bridge was engaged into the keyway. All prostheses were casted in the same nonprecious alloy and were cemented and screwed on their respective abutments and implants. 16㎏ of vertical loads on central fossae of second premolar, first molar pontic, implant of second molar were applied respectively and 6.5㎏ of inclined load on middle buccal surface of first molar pontic was applied. The results were as follows : 1. Under the vertical load on the central fossa of first mloar pontic, the stress developed at the apex of tooth of implat was more uniformly distributed in the case of nonrigid connection than in the case of rigid connection. 2. Under the vertical load on the central fossa of first molar pontic, the stress developed around the cervical area of tooth of implant was larger in the case of rigid connection than in the case of nonrigid connection because the bending moment was more occured in the case of rigid connection than in the case of nonrigid connection. 3. Stress was more restricted to the loaded side of nonrigid connection than to that of rigid connection 4. Under the inclined load. The set screw loosening of implant was more easily occured in the case of nonrigid connection than in the case of rigid connection due to torque moment. 5. In the case of Branemark implant, the stress concentration in second premolar was larger and the stress developed around the cervical area of implant was lower than any other cases under the vertical load, because Branemark implant with the flexible gold screw was showed in incline toward second premolar by a bending moment. 6. The stress developed around the apex of tooth or implant was more uniformly distributed in the case of Steri-Oss implant with stiff screw than in the case of Branemark implant under the vertical load. But, the stress developed around the cervical area of the Steri-Oss implant was larger than that of any other implants because bending moment was occured by vertical migration of second premolar. 7. The stress distribution in the case of IMZ implant was similar to the case of natural teeth under small vertical load. But, the residual stress around the implant was showed to occurdue to deformation of IMC and sinking of screw under larger vertical load.