• Proceedings of the Korea Concrete Institute Conference
• /
• 1990.10a
• /
• pp.1-6
• /
• 1990

Joints are provided in cement concrete pavements to control transverse and longitudinal cracking that occur due to restrained deformations caused by moisture and temperature variations in the slab. But the construction of joints reduces the load-carrying capacity of the pavement at the joints, and pavements have beem deteriorated by cracks at the slab edges along the joints due to traffic loads. Therefore, it is important to analyze the behavior of joints accurately in the design of cement concrete pavements. In this study, the mechanical behavior of cement concrete pavement slabs is analyzed by the plate-finite element model, and Winkler foundation model is adopted to analyze the subgrades. The load transfer mechanism of joints are composed of dowel action, aggregate interlocking, and tied-key action, and the analytical program is developed using these joint models.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.321-324
• /
• 2006

An experimental study on the bond strength of wall-slab joint in SC(steel plate-concrete) structure was performed. Six-full scale specimens were tested. Specimens were constructed with key variables, such as, development length, location of the bar and quantity of the shear bar. The experimental results, show that as the development length and quantity of the shear bar increase, the bond strength increases. As the bars is located on the inside the stud bolt, the bond performance was highly increased compared to the bars located out of plane of the stud bolts.

• Journal of Oral Medicine and Pain
• /
• v.44 no.2
• /
• pp.65-68
• /
• 2019

Temporomandibular disorders (TMD), involving the masticator system of temporomandibular joint (TMJ) and masticator muscle, can be characterized with the cardinal signs and symptoms of jaw pain, noises and limitation of mandibular range of motion. However, TMD requires differential diagnosis due to its heterogeneous characteristics with various causes despite the similar clinical profiles. Oral cancer involving TMJ and the masticator system, although infrequent, can be one of these causes and should be considered one of the most life-threatening disease mimicking TMDs. This report introduces a case of masticator space tumor originally diagnosed as TMD in a 73-year-old Korean female with previous history of brain tumor. The clinical signs and symptoms closely mimic that of TMD which may have disrupted differential diagnosis. We discuss here key points for suspecting TMDs of secondary origin, namely, that of cancer and the implications it has on dental clinicians.

• Structural Engineering and Mechanics
• /
• v.68 no.4
• /
• pp.475-483
• /
• 2018

Square tubular columns are commonly used in moment resisting frames, while through-diaphragm connection is the most typical configuration detail to connect the H-shaped beam to the column. However, brittle fracture normally occurs at the complete joint penetration weld between the beam flange and the through-diaphragm due to the stress concentration caused by the geometrical discontinuity. Accordingly, three improved types of through-diaphragm are presented in this paper to provide smooth force flow path comparing to that of conventional connections. Tensile tests were conducted on four specimens and the results were analyzed in terms of failure modes, load-displacement response, yield and ultimate capacity, and initial stiffness. Furthermore, strain distributions on the through-diaphragm, the beam flange plate, and the column face were comprehensively evaluated and discussed. It was found that all the proposed three types of improved through-diaphragm connections were able to reduce the stress concentration in the welds between the beam flange and the through-diaphragm. Furthermore, the stress distribution in connection with longer tapered through-diaphragm was more uniform.

• Journal of Korean Physical Therapy Science
• /
• v.20 no.1
• /
• pp.61-67
• /
• 2013

Purpose : The purpose of this paper is to figure out the effects of the Powerball exercise on grip strength, tip pinch and key pinch. Methods : Twenty subjects participated in this experiment. Spin right wrist counterclockwise for five minutes holding Powerball after making main joint of right hand -predominant hand- into elbow flexion and forearm pronation. Results : 1. Before and after Powerball exercise, when we compared the grip strength of men and women, there was a significant difference. 2. Before and after Powerball exercise, when we compared tip pinch of men and women, there was a significant difference. 3. Before and after Powerball exercise, when we compared key pinch of men and women, there was a significant difference. 4. Before and after Powerball exercise, there was no significant difference between men and women. Conclusion : From what using Powerball exercise influenced grip strength, tip pinch and key pinch positively, we assume that it will be considered a great expectation to improve grip strength, tip pinch and key pinch in the future and it would be better to conduct this experiment in depth to a lot of people.

• Steel and Composite Structures
• /
• v.23 no.6
• /
• pp.727-736
• /
• 2017

The application of carbon fiber reinforced polymer (CFRP) in steel structures primarily includes two categories, i.e., the bond-critical application and the contact-critical application. Debonding failure and buckling failure are the main failure modes for these two applications. Conventional electrometric techniques may not provide precise results because of the limitations associated with single-point contact measurements. A nondestructive full-field measurement technique is a valuable alternative to conventional methods. In this study, the digital image correlation (DIC) technique was adopted to investigate the bond behavior and buckling behavior of CFRP-steel composite members. The CFRP-to-steel bonded joint and the CFRP-strengthened square hollow section (SHS) steel column were tested to verify the suitability of the DIC technique. The stereo-DIC technique was utilized to measure continuous deformation. The bond-slip relationship of the CFRP-to-steel interface was derived using the DIC data. Additionally, a multi-camera DIC system consisting of four stereo-DIC subsystems was proposed and applied to the compressive test of CFRP-strengthened SHS steel column. The precise buckling location and CFRP delamination of the CFRP-strengthened SHS steel column were identified. The experimental results confirm that the stereo-DIC technique can provide effective measurements for investigating the behaviors of CFRP-steel composite members.

• The korean journal of orthodontics
• /
• v.53 no.2
• /
• pp.67-76
• /
• 2023

Objective: Morphometric and morphological evaluation of the mandibular condyle in adults and to identify its correlation with skeletal malocclusion patterns. Methods: Cone-beam computed tomography scans of 135 adult patients were used in this study and classified into groups according to four criteria: (1) sex (male and female); (2) sagittal skeletal discrepancy (Class I, Class II, and Class III); (3) vertical skeletal discrepancy (hyperdivergent, normodivergent, and hypodivergent); and age (group 1 ≤ 20 years, 21 ≤ group 2 < 30, and group 3 ≥ 30 years). The morphometrical variables were mandibular condyle height and width, and the morphological variable was the mandibular condyle shape in coronal and sagittal sections. Three-dimensional standard tessellation language files were created using itk-snap (open-source software), and measurements were performed using Meshmixer (open-source software). Results: The mandibular condyle height was significantly greater (p < 0.05) in patients with class III malocclusion than in those with class I or II malocclusion; the mandibular condyle width was not significantly different among different sexes, age groups, and sagittal and vertical malocclusions. There were no statistical associations between various mandibular condyle shapes and the sexes, age groups, and skeletal malocclusions. Conclusions: The condylar height was greatest in patients with class III malocclusion. The condylar height and width were greater among males than in females. The mandibular condyle shapes observed in sagittal and coronal sections did not affect the skeletal malocclusion patterns.

• Ocean Systems Engineering
• /
• v.2 no.2
• /
• pp.137-145
• /
• 2012

Recent developments in underwater image recognition methods have received large attention by the ocean engineering researchers. In this paper, an improved bi-dimensional empirical mode decomposition (BEMD) approach is employed to decompose the given underwater image into intrinsic mode functions (IMFs) and residual. We developed a joint algorithm based on BEMD and Canny operator to extract multi-pixel edge features at multiple scales in IMFs sub-images. So the multiple pixel edge extraction is an advantage of our approach; the other contribution of this method is the realization of the bi-dimensional sifting process, which is realized utilizing regional-based operators to detect local extreme points and constructing radial basis function for curve surface interpolation. The performance of the multi-pixel edge extraction algorithm for processing underwater image is demonstrated in the contrast experiment with both the proposed method and the phase congruency edge detection.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2001.11a
• /
• pp.318-321
• /
• 2001

We have designed an Internet voting system applicable for worldwide voting which is based on Ohkubo et. al,'s scheme[9] combined with Public Key Infrastructure (PKI). To the best of our knowledge, this is the first trial to serve secure Internet voting system to the world. In our system, voter's privacy is guaranteed by using blind signature and mix-net, and robustness is provided through the threshold encryption scheme. By employing Java technology, we propose a way of typical implementation for internet voting system. Furthermore, PKI permits worldwide key distribution and achieve “one certificate/one vote” policy. Therefore, anyone can participate in the voting if he gets a certificate from Certificate Authority (CA). By the joint work between Korean and Japanese teams, the implementation aims to select MVPs in 2002 FIFA World Cup Korea-Japan$\^$TM/ in easy and friendly manner for any Internet user to participate and enjoy Internet voting.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.10
• /
• pp.4025-4041
• /
• 2020

Mobile edge computing (MEC) is capable of providing services to smart devices nearby through radio access networks and thus improving service experience of users. In this paper, an offloading strategy for the joint optimization of computing and communication resources in multi-user and multi-MEC overlapping scene was proposed. In addition, under the condition that wireless transmission resources and MEC computing resources were limited and task completion delay was within the maximum tolerance time, the optimization problem of minimizing energy consumption of all users was created, which was then further divided into two subproblems, i.e. offloading strategy and resource allocation. These two subproblems were then solved by the game theory and Lagrangian function to obtain the optimal task offloading strategy and resource allocation plan, and the Nash equilibrium of user offloading strategy games and convex optimization of resource allocation were proved. The simulation results showed that the proposed algorithm could effectively reduce the energy consumption of users.