We have fabricated alumina thick films by inkjet printing technology. Two different types of ink system were formulated in order to understand their evaporation behaviors and their evaporation effects on the powder distribution on, the surface during inkjet-printed alumina thick films. Single solvent system was formulated with N,N-dimethylformamide(DMF), which led to coffee ring effects which non-uniformly distributed alumina particles on the substrate during the ink evaporation. However, Co-solvent system which consists of both Water and DMF produced relatively uniform distribution of the particles on the substrate. We believe that these two different distributions of alumina particles are attributed to the ink fluid flow directions in the ink droplets ejected from the different ceramic ink system. We have modulated inkjet parameters such as dot-to-dot distance, line-to-line distance, jetting velocity and jetting drop size in order to find out the optimum condition for the printing of alumina thick films from two different ink systems. The surface roughness, microstructures and dielectric properties of these inkjet-printed alumina thick films were investigated.
피리딘, ${\beta}$-피코린 및 3,5-루티딘과 요오드사이에 형성되는 전하이동착물을 사염화탄소 용액에서 자외선분광광도법을 사용하여 연구한 결과 $C_5H_5N{\cdot}I_2$, ${\beta}-C_5H_4(CH_3)N{\cdot}I_2$ 및 3,5-$C_5H_3(CH_3)_2N{\cdot}I_2$ 형의 1:1 분자착물이 형성됨을 알았다. 이들 착물생성에 대한 흡수최대는 온도가 상승함에 따라 blue shift되므로 이를 고려하여 각 온도에서의 평형상수를 구했다. 이 값으로부터 이들 착물생성에 대한 ${\Delta}H$, ${\Delta}G$및 ${\Delta}S$ 이 열역학적 파라미터를 산출하였다. 이 결과 착물의 상대적 안정도가 다음 순서로 증가함을 알수가 있었다. Pyridine < ${\beta}$-Picoline < 3,5-Lutidine. 이러한 결과는 dipole moment, steric hindrance effect 및 positive inductive effect에 의한 electron density의 증가 때문인 것으로 설명할 수 있었다. 그리고 polymethylbenzene-iodine CT-complex와도 비교 검토하였다.
TF magnet structures are the main structural components in the KSTAR magnet systems to protect the superconducting coils from mechanical, electrical, and thermal loads. TF coil structure supports CS and PF coil system. The inter-coil structure contains adjustable shear keys and conical bolts to provide pre-loading in toroidal direction and to resist against in-plane and out-of-plane forces that are the most critical loads on the TF magnet system. The conical bolts and shear keys are specially designed to assemble easily and to provide a convenient accommodation for a good alignment. The connection plate that is one of the prototype fabrications had been manufactured to study adjustability of conical bolts and shear keys for assembly of TF coil structure. We could measure the misalignments at the keyways and conical holes with the misalignment measuring instrument.
It is necessary to find out the reaction characteristics of $CaCO_3$ sorbent particles in air and $O_2/CO_2$ atmospheric conditions in order that an in-furnace desulfurization technique can be applied to oxy-fuel combustion system. In this study, rate of change of GMD(geometric mean diameter) and specific surface area of $CaCO_3$ sorbent particles reacted in DTF(drop tube furnace) experimental setup were analyzed to investigate the effect of particle size and humidity on the reaction characteristics of them. In air atmospheric condition, calcination process occurs actively within shorter residence times as the particle size increases. On the contrary, in $O_2/CO_2$ atmospheric condition, a calcination process is delayed as particle size increases. The increment of humidity accelerates calcination process in an air atmospheric condition and increase rate of calcination in an $O_2/CO_2$ atmospheric condition.
Piaskowska, N.;Daszkiewicz, T.;Kubiak, D.;Zapotoczny, P.
Asian-Australasian Journal of Animal Sciences
/
제29권12호
/
pp.1782-1789
/
2016
This study evaluated the effect of vacuum and modified atmosphere (40% $CO_2+60%$$N_2$, MA) packaging on the chemical composition, physicochemical properties and sensory attributes of chill-stored meat from 10 fallow deer (Dama dama) bucks at 17 to 18 months of age. The animals were hunter-harvested in the forests of north-eastern Poland. During carcass dressing (48 to 54 h post mortem), both musculus longissimus muscles were cut out. Each muscle was divided into seven sections which were allocated to three groups: 0, A, and B. Samples 0 were immediately subjected to laboratory analyses. Samples A were vacuum-packaged, and samples B were packaged in MA. Packaged samples were stored for 7, 14, and 21 days at $2^{\circ}C$. The results of the present study showed that the evaluated packaging systems had no significant effect on the quality of fallow deer meat during chilled storage. However, vacuum-packaged meat samples were characterised by greater drip loss. Vacuum and MA packaging contributed to preserving the desired physicochemical properties and sensory attributes of meat during 21 days of storage. Regardless of the packaging method used, undesirable changes in the colour, water-holding capacity and juiciness of meat, accompanied by tenderness improvement, were observed during chilled storage.
An attempt was made to analyze the factors affecting mating performance of rams in pen mating systems. Due to many types of social interactions, mating performance of rams may decrease or increase. Six intact Muzaffarnagari rams were used and divided into three dominant subordinate pairs by food and ewe competition test. For dominant rams subordinate ram became competitor and vice versa. In the first experiment, ram was exposed to ewe but the competitor ram was kept outside the pen with the facility of visibility only. In the second experiment each ram was exposed to ewe along with the competitor ram and in third experiment ram was exposed to ewes (two) along with competitor ram in observation pen. Recordings of different mating and agonistic behaviour were done in all the experiments. It was found that subordinate ram's mating behaviour was inhibited by mere presence of a dominant ram out side without physical contact. However, when ram exposed to oestrus ewe(s) along with competitor ram, both dominant and subordinate rams spent much of their time in guarding activities instead of mating. In addition dominant ram tried to curtail the subordinate ram mating by agonistic interaction like fight and butting. Different guarding activities were observed either as active or passive type depending on level of dominanace. It was concluded that in a limited space the interaction of two or more rams might affect the number of services adversely.
유체 유동 시스템에서 히스테리시스 현상은 다양한 산업 및 공학 응용 분야에서 발생하며, 최근 이에 대한 많은 연구가 수행되어 왔다. 이러한 현상은 주로 압력비가 일시적으로 변화하는 과정에서 발생하며 초음속 풍동에 영향을 미칠 것으로 예상되나, 이에 대한 연구는 찾아보기 힘들다. 본 연구에서는 초음속 풍동 내부에서 발생하는 히스테리시스 현상을 수치해석으로 조사하였다. 비정상, 축대칭, 압축성 N-S 방정식을 유한 체적법으로 이산화 하였으며, 난류모델은 Spalart-Allmaras을 적용하였다. 본 연구의 결과로 전압의 증감에 따라, 동일한 압력비에서 발생하는 충격파의 위치가 다르게 나타났으며, 이를 통해 초음속 풍동을 효율적으로 작동시킬 수 있는 최적의 압력비를 찾을 수 있음을 알았다.
Sm$O_{1.5+x}$와 Zr$O_{2+x}$로 표시되는 사마늄 산화물과 지르코륨산화물의 비화학양론적 조성식의$x^-$값을 500$^{\circ}$C에서 1000$^{\circ}$C까지의 온도 영역과 2 ${\times} 10^{-1}$ ~ 1 ${\times}10^{-5}$기압 산소압력까지의 영역에서 중량 분석법에 의하여 측정하였다.$x^-$값은 온도가 상승하면 증가하고 산소압력이 높아짐에 따라 또한 증가하였다. 비화학양론적 조성의 생성엔탈피 ${\Delta}H_f$는 산소압력이 낮아지면 감소하였고 그 값은 양의 값을 갖는다. 산소압력 의존성 n/1은 온도가 상승하면 커지고 양의 값을 갖는 것으로 고온일수록 산소압력 의존성이 커짐을 나타낸다. $x^-$값과 열역학적 자료들로 부터 비화학양론적 결함은 이온화된 금속공위이다. 이들 계의 전도성 메카니즘을 비화학양론적 조성과 관련시켜 고찰하였다.
In mid-April, 2000, hundreds of thousands of fish floated dead on the Chungnang River, one of the small branches of the Han River in Seoul. We examined the causes of the accident in detail, through analysis of monitorinq data from the Han River Monitoring Project, which employed the transplanted aquatic moss, Fontinalis antipyretica. This allowed investigation of another possible cause of the fish kill: release of trace metals into the river from industrial sources during the rainfall event. In addition, we aimed to verify the usefulness of aquatic mosses as bioindicators of the event. Water samples collected 48 h after the fish kill exhibited low pH and high Total-N and Total-p, indicating that acidic compounds rich in nitrogen and phosphorus might be a major contaminant. BOD and COD were also very high. On the whole, the conditions of the river water were degraded at that time. Distinct trends were not observed in the chlorophyll phaeophy-tinization quotient and photosynthesis rate of transplanted mosses. How-ever mosses sampled soon after the accident exhibited the lowest values for those variables (P < 0.01), suggesting that stress factors in the river were diluted out over time. Heavy metals with characteristics of industrial effluents (Cr, Pb, Zn, Fe, Cu, and Cd) increased (p < 0.01), indicating that they were unlikely to be major causes of the accident.
Bi-staged pH process 하의 jar fermenter system에서 영지의 액체배양 시 효율적인 균사체 및 세포의 다당 생산을 위한 용존산소의 영향을 조사하고, 산소이동용량계수와 발효조 조작변수와의 상관관계를 해석하여 scale up의 조건을 검토, 확립하였다. 교반속도에 따른 용존산소의 농도변화를 살펴본 결과, hi-staged pH process에서 배양 $2{\sim}4$일에 용존 산소의 급격한 감소를 보였으나 용존 산소의 제한은 일어나지 않고, 다시 증가하는 경향을 보였으며, 교반속도가 증가할수록 감소 폭과 깊이는 증가하는 경향을 보였다. 다당 생성은 대수 증식기 이후의 용존 산소농도가 $40{\sim}80%$ 범위일 때 가장 높았으며, 이 보다 낮거나 높은 경우 다당의 생성은 저해되었다. 교반 및 통기에 따른 산소이동용량계수 ($k_La$)와 통기속도 (Vs), 교반속도 (N) 및 impeller 지름 (Di)의 자료로부터 중회귀분석한 결과, 이들 사이의 관계는 다음 식으로 표현할 수 있었다. $$k_La=0.555{\times}Vs^{0.42}{\times}(N^3{\times}Di^2)^{0.33}\;(R^2=0.925,\;p<0.05)$$ 2.6 L 발효조의 경우, 15.43 g/L의 최대 다당 생산량은 400 rpm 및 1 vvm에서 얻어졌으며, 2.6 L 발효조의 최적 산소이동용량계수 값을 적용한 20 및 75 L 발효조에서의 scale up 시험 결과는 서로 잘 일치하였다. 최대의 다당생성을 위한 산소전달계수의 감은 $85.4{\pm}26.70\;h^{-1}$이었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.