• Journal of the Korean Chemical Society
• /
• v.45 no.1
• /
• pp.14-24
• /
• 2001

In order to study the long-term change of water quality, water analysis for 9 items was conducted at 13 sites surrounding the Kumho river system for 18 times from September 1993 to August 1999. Analytical items for the study of water quality are as follows; water temperature, pH, BOD, COD, DO, SS, electrical conductivity, oil and grease, ABS and phenol. The six year term was divided into Part I(second study) and Part Ⅱ(third study), which covers the term from September 1993 to August 1996 and the term from September 1996 to August 1999, respectively. The mean values obtained for three years for water temperature, pH, BOD, COD, DO, SS, electrical conductivity, oil and grease, ABS and phenol for the Part I period showed 18.4$^{\circ}C$, 7.9, 4.88 ppm, 9.66 ppm, 9.0 ppm, 618.0 umho/cm, 6.9 ppm, 2.63 ppm, 3.57 ppm and 0.98 ppm, respectively. The mean values obtained for water temperature, pH, BOD, COD, DO, SS, electrical conductivity, oil and grease, ABS and phenol for the Part Ⅱ period showed 18.0$^{\circ}C$, 8.0, 2.86 ppm, 7.40 ppm, 8.94 ppm, 541.0 umho/cm, 6.0 ppm, 5.43 ppm, 0.94 ppm and 0.01 ppm respectively. The values of BOD, COD, SS, electrical conductivity, ABS and phenol in the second period were found to be decreased by 1/1.71, 1/1.31, 1/4.15, 1/3.80 and 1/98, respectively. The values of water temperature, pH and DO were nearly constant. However, the concentrations of oil and grease were found to be increased about 2.06 times in the second period.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1512-1512
• /
• 2001

The University of Cordoba conducts since 1991 a breeding program to obtain new olive cultivars from intraspecific crosses. The objective is to obtain new early bearing and high-quality cultivars. In plant breeding, many seedlings must be tested to increased the chance of getting desirable genotypes. Therefore, fast, cheap and accurate methods of analysis are necessary. The conventional laboratory techniques are costly and time-consuming. Near Infrared Spectroscopy (NIRS) can satisfy the characteristics requested by plant breeders and offers many advantages such as the simultaneous analysis of many traits and cheap cost. The objective of this work was to asses the performance of NIRS to estimate oil fruit components (fruit weight, flesh moisture, flesh/stone ratio and oil flesh content in dry weight basis) and fatty acid composition in olive fruit. Genotypes from reciprocal crosses between ‘Arbequina’, ‘Frantoio’ and ‘Picual’ cultivars have been used in this study. A total of 287 samples, each from a single plant, were scanned using a DA-7000 Diode Array VIS/NIR Analysis System (Perten Instruments), which covers the visible and NIR range from 400-1700 nm. All samples were analysed for fatty acid composition (gas chromatography) and 220 for oil fruit components (oil content by nuclear magnetic resonance), 70% and 30% of samples were randomly assign for the calibration and validation sets respectively. The preliminary results shows that calibration for palmitic, oleic and linoleic acids were highly accurate with calibration and validation values of $r^2$ from 0.85 to 0.95 and 0.76 to 0.91 respectively. Calibration for palmitoleic and estearic acids were less accurate, probably because of the narrow range of variability available for these fatty acids. For the oil fruit components, calibration were high accurate for flesh moisture and oil flesh content in dry weight basis ($r^2$ higher than 0.90 in both calibration and validation sets) and less accurate for the other characteristics evaluated. The first results obtained indicate that NIRS analysis could be an ideal technique to reduce the cost, time and chemical wasted necessary to evaluate a large number of genotypes and it is accurate enough to use for pre-selecting genotypes in a breeding program.

• The Korean Journal of Financial Management
• /
• v.25 no.1
• /
• pp.109-140
• /
• 2008

The primary objective of this paper investigates whether asymmetric volatility phenomenon is caused by differences of opinion among investors and analyses information availability has an effect on asymmetric volatility. The empirical test period covers recent 6 years from January 4, 2000 to December 29, 2005. Five portfolios have been formed according to information availability(volume and market value). For the purpose of this study, We use TGARCH model, TGARCH-M model and adjusted model which include trading volume as a proxy differences of opinion among investors. The results are summarized as follows ; First, adjusted model analysis shows that asymmetric volatility phenomenon is disappeared or asymmetric coefficient and ratio is decreased than basis model. Second, portfolio analysis shows that the higher volume and market value, the more prominent asymmetric volatility phenomenon. And adjusted model analysis shows the higher volume and market value, the more decrease asymmetric ratio. Over all, assertion that differences of opinion among investors has caused asymmetric volatility phenomenon is regarded as reasonable. And, We see that information availability have great effect on asymmetric volatility phenomenon. We think that theses results can also occur opinion adjustment of optimistic investors. Namely, asymmetric volatility phenomenon can occur difference of information authenticity.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.447-452
• /
• 2006

The remote sensing technique was applied to enhance the water qualify model validation in a large water body. Since the satellite image usually covers the wide surface area of a large water body, it can compensate for the lark of measured data points required for model calibration and verification. This paper describes the analysis of Landsat FTM+images collected on April 29th and September 4th in year 2000 to evaluate surface water temperature of Lake Paldang. The water temperature data obtained from the satellite image were compared with model results by estimating three different methods of error criteria. The residual ratios on April 29th and September 4th were 0.13 and 0.04 respectively. This showed that the model result accords with the data obtained from the process of satellite image. Without considering atmospheric interference, however, transformation process of satellite image causes relatively large residual ratio in the surface water temperature distribution pattern on April 29th. In the future study, therefore, the atmospheric properties of image acquisition point needs to be considered for the application of radiance transformation model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.590-599
• /
• 2017

In South Korea, sewage pipeline exploration devices have been developed using high resolution digital cameras of 2 mega-pixels or more. On the other hand, most devices are less than 300 kilo-pixels. Moreover, because 100 kilo-pixels devices are used widely, the environment for image processing is very poor. In this study, very low resolution ($240{\times}320$ = 76,800 pixels) images were adapted when it is difficult to detect cracks. Considering that the images of sewers in South Korea have very low resolution, this study selected low resolution images to be investigated. An automatic crack detection technique was studied using digital image processing technology for low resolution images of sewage pipelines. The authors developed a program to automatically detect cracks as 6 steps based on the MATLAB functions. In this study, the second step covers an algorithm developed to find the optimal threshold value, and the fifth step deals with an algorithm to determine cracks. In step 2, Otsu's threshold for images with a white caption was higher than that for an image without caption. Therefore, the optimal threshold was found by decreasing the Otsu threshold by 0.01 from the beginning. Step 5 presents an algorithm that detects cracks by judging that the length is 10 mm (40 pixels) or more and the width is 1 mm (4 pixels) or more. As a result, the crack detection performance was good despite the very low-resolution images.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.746-757
• /
• 1996

Bony defects may be found as a result of congenital anomalies, traumatic injury, automobile collisions and industrial accidents in the maxillofacial area. Such conditions are often associated with severs functional and esthetic problem. Various surgical procedure has been utilized in attempts to repair and reconstruct bony defects. Bone is a complex, living, constantly changing tissue. The architecture and composition of cancellous and cortical bone allow the skeleton to perform its essential mechanical functions. Periosteum covers the external surface of bone and consists of two layers : an outer fibrous layer and an inner more cellular and vascular layer. The inner osteogenic layer or cambium layer can form new bone while the outer layer firms part of the insertions of tendons, ligaments and muscles. This study was under taken to evaluate bone healing process on partial defect of calvarial bone with or without periosteum in rat. We made calvarial defects of different size(4mm, 6mm, 8mm) with periosteum or without periosteum in rat to study the effect of defect size on healing process. Control and experimental groups sacrified at 1, 2, 4, 6, 8 weeks, postoperatively. We examed the specimens by gloss findings, light microscophy, and fluorescent microscophy. The results were as follows. 1. Gloss findings: Control groups are larger bony defects than experimental groups after 2 weeks, and than control groups advanced healing of defected bone but experimental groups are lesser after 4, 6 weeks. After 8 weeks, bone defect has not been identified in control and experimental groups. 2. Light microscope: All defects of control groups are larger bony defects than experimental groups after 2 weeks. And than control groups show smaller defect after 4 weeks. After 8 weeks, the control group reveal pin-point sized, hardly identifiable defect space and the experimental group reveal small, but definite defect space. 3. Fluorescent microscope : Each week, new bone formation of control group is very similar to the experimental group. In this study, Osteogenesis of calvarial bone defects with periosteum or without periosteum was examined for 8 weeks in rats. The replaced periosteum had batter new bone formation than the removed periosteum.

• Spatial Information Research
• /
• v.23 no.4
• /
• pp.91-101
• /
• 2015

Due to recent increase of indoor spatial information demands, several international standards have been published for indoor spatial information. OGC has also recently published two standards for indoor space; CityGML and IndoorGM. CityGML aims to provide a standard for 3D city modeling and the level of details (LoD) 4 covers the indoor space. IndoorGML focuses only on indoor space and provides several functions to complement the weakness of CityGML. It is therefore recommended to apply IndoorGML as a combination with CityGML. However since the weakness and strengths between these standards are not yet fully studied and understood, there is no well-defined guideline to apply them in a proper way. It means that we need to carry out a comparative study between them for their proper integration. For this reason, we discuss the pros and cons of these standards from two use-cases. The sites for the use-cases cover Lotte World Mall and Jongno-5 subway station, respectively. We studied these use-cases to compare CityGML and IndoorGML through the data construction of CityGML and IndoorGML for these sites. And based on several application scenarios, we also analyzed the weakness and strengths of each standard from different viewpoints. We expect that these comparative studies will be helpful to make a guideline on the application and integration between CityGML and CityGML.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.152-158
• /
• 2009

Total Skin Electron Beam Therapy (TSEBT) of linear accelerator has become use so as to be useful, 2~9 MeV of energy territories came to be used with mycosis fungoides and cutaneous lymphomas in the superficial lesion treatment which covers the major portion of the body. I treat a patient to Stanford technique in this study, and it is $60^{\circ}$ around the patients whom Stanford technique irradiated electronic beam to a linear accelerator in horizontal directions and there is a way a standard of TSEBT treat it to six located field (anterior, posterior, and four obliques) becoming. An each field does horizontally it and consist to beam of the two component which fitted the center to a suitable angle. a patient treats it to three dual field a day in order to make short treatment time. when a first day, we treat one dual field at anterior position and two dual field at posterior position. when the second day, treat one dual field at posterior position and two dual field at anterior position. Therefore, six dual field is finished in perfect periodic two days. we made cylindrical acrylic phantom, and I inserted a dosimeter film between phantom. in order to measure a dose distribution calculation before treat a patient, and a patient checked it in six field directions that got from a treatment. It is after that thermoluminescent dosimetry (TLD) as it uses Rando phantom and then measurement dose distribution in six field directions after attaching at chest, the right and left flank, a back after irradiation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.26-37
• /
• 2016

The core technologies of the current transport network are OAM and protection switching to meet the sub-50ms protection switching time via a path redundancy when a link or node failure occurs. The transport networks owned by public network operators, central/local governments, and major enterprises are individually configured and managed with service resiliency in each own protected sub-network. When such networks are cascaded, it is also important to provide a node resiliency between two protected sub-networks. However, the linear protection switching in packet transport networks, such as MPLS-TP and Carrier Ethernet, does not define a solution of dual node interconnection. Although Ethernet ring protection switching covers the dual node interconnection scheme, a large amount of duplicated data frames may be flooded when a failure occurs on an adjacent (sub) ring. In this paper, we suggest a dual node interconnection scheme with linear protection switching technology in multiple protected sub-networks. And we investigate how various protected sub-network combinations with a proposed linear or ring protection process impact the service resiliency of multiple protected sub-networks through extensive experiments on link and interconnected node failures.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.94-104
• /
• 2007

Iris recognition is biometric technology which uses a unique iris pattern of user in order to identify person. In the captured iris image by conventional iris recognition camera, it is often the case with eyelid occlusion, which covers iris information. The eyelids are unnecessary information that causes bad recognition performance, so this paper proposes robust algorithm in order to detect eyelid. This research has following three advantages compared to previous works. First, we remove the detected eyelash and specular reflection by linear interpolation method because they act as noise factors when locating eyelid. Second, we detect the candidate points of eyelid by using mask in limited eyelid searching area, which is determined by searching the cross position of eyelid and the outer boundary of iris. And our proposed algorithm detects eyelid by using parabolic hough transform based on the detected candidate points. Third, there have been many researches to detect eyelid, but they did not consider the rotation of eyelid in an iris image. Whereas, we consider the rotation factor in parabolic hough transform to overcome such problem. We tested our algorithm with CASIA Database. As the experimental results, the detection accuracy were 90.82% and 96.47% in case of detecting upper and lower eyelid, respectively.