• 제목/요약/키워드: k-band

검색결과 10,566건 처리시간 0.038초

고온 초전도체를 이용한 이동통신 기지국용 영역통과 필터에 관한 연구 (High-temperature superconducting band-pass filters for digital cellular communication system)

  • 이종현;도영호;곽준식;김채옥;홍진표;이경림;한석길;차국린
    • Progress in Superconductivity
    • /
    • 제4권2호
    • /
    • pp.132-136
    • /
    • 2003
  • Extremely selective high temperature superconducting (HTS) band -pass filters were developed for the base transceiver station applications of Digital Cellular communication Service (DCS). The filters have a bandwidth of 25 MHz at a center frequency of 834 MHz. There are 12 resonators which have spiral-meander microstrip-line structures in order to reduce far-field radiations with a reasonable tunability. As a result, the size of filters is 5 mm $\times$ 17 mm $\times$ 41 mm. Device characteristics exhibited a low insertion loss of -0.4 dB with a -0.2 dB ripple and a return loss better than -10 dB in the pass-band at 65 K. The out-of-band signals were attenuated better than 60 dB about 3.5 MHz from the lower band edge, and 3.8 MHz from the higher band edge.

  • PDF

Temperature dependence of photocurrent spectra for $AgInS_2$ epilayers grown by hot wall epitaxy

  • Baek, Seung-Nam;Hong, Kwang-Joon
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.123-124
    • /
    • 2007
  • A silver indium sulfide ($AgInS_2$) epilayer was grown by the hot wall epitaxy method, which has not been reported in the liteniture. The grown $AgInS_2$ epilayer has found to be a chalcopyrite structure and evaluated to be high quality crystal. From the photocurrent measurement in the temperature range from 30 K to 300 K, the two peaks of A and B were only observed, whereas the three peaks of A, B, and C were seen in the PC spectrum of 10 K. These peaks are ascribed to the band-to-band transition. The valence band splitting of $AgInS_2$ was investigated by means of the photocurrent measurement. The temperature dependence of the energy band gap of the $AgInS_2$ obtained from the photocurrent spectrum was well described by the Varshni's relation, $E_g(T)=\;E_g(0)\;eV-(7.78\;{\times}\;10^{-4}\;eV/K)T^2/(T\;+\;116\;K\;K)$. Also, Eg(0) is the energy band gap at 0 K, which is estimated to be 2.036 eV at the valence band state A and 2.186 eV at the valence band state B.

  • PDF

협대역 저지 특성을 가지는 UWB용 마이크로스트립 필터 설계 (The Design of Microstrip Band-Selective Filter with Narrow Stopband for UWB Application)

  • 노양운;홍석진;정경호;정지학;최재훈
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
    • /
    • pp.7-12
    • /
    • 2005
  • A compact microstrip band-selective filter for ultra-wideband (UWB) radio system is proposed. The filter combines the traditional short-circuited stub highpass filter and coupled resonator bandstop filter on both sides of the mitered 50-ohm microstrip line. To realize the pseudo-highpass filtering characteristic over UWB frequency band (3.1 GHz to 10.6 GHz), a distributed highpass filter scheme is adopted. Three coupled resonators are utilized to obtain the band stop function at the desired frequency band. By meandering the coupled resonators, there is 29% reduction in footprint compared to the traditional bandstop filter using L-shaped resonators. The measured results show that the filter has a wide passband of 146.7 % (2.1 GHz to 10.15 GHz) with low insertion loss and the stop band of 7.42 % (5.32 GHz to 5.73 GHz) for 3-dB bandwidth. The measured group delay is less than 0.7 ns within the passband except the rejection band.

  • PDF

Controllable Band-Notched Slot Antenna for UWB Communication Systems

  • Kueathaweekun, Weerathep;Anantrasirichai, Noppin;Benjangkaprasert, Chawalit;Nakasuwan, Jintana;Wakabayashi, Toshio
    • ETRI Journal
    • /
    • 제34권5호
    • /
    • pp.674-683
    • /
    • 2012
  • We propose a slot antenna consisting of a rectangular slot on the ground plane, fed by a microstrip line with a rectangular-ring-shaped tuning stub that can be deployed in ultra-wideband (UWB) communication systems to avoid interference with wireless local area network (WLAN) communication. Our antenna can achieve a single band-notched property from the 5 GHz frequency to the 6 GHz frequency owing to a controllable band notch that uses L- and J-shaped parasitic elements. The antenna characteristics can be modified to tune the band-notched property (4 GHz to 5 GHz or 6 GHz to 7 GHz) and the bandwidth of the band notch (1 GHz to 2 GHz). Furthermore, the shifted notch with enhanced width of the band notch from 1 GHz to 1.5 GHz is described in this paper. The UWB slot antenna and L- and J-shaped parasitic elements also provide the band-rejection function for reference in the WiMAX (3.5 GHz) and WLAN (5 GHz to 6 GHz) regions of the spectrum. Experiment results evidence the return loss performance, radiation patterns, and antenna gains at different operational frequencies.

Effectiveness of Using the TIR Band in Landsat 8 Image Classification

  • Lee, Mi Hee;Lee, Soo Bong;Kim, Yongmin;Sa, Jiwon;Eo, Yang Dam
    • 한국측량학회지
    • /
    • 제33권3호
    • /
    • pp.203-209
    • /
    • 2015
  • This paper discusses the effectiveness of using Landsat 8 TIR (Thermal Infrared) band images to improve the accuracy of landuse/landcover classification of urban areas. According to classification results for the study area using diverse band combinations, the classification accuracy using an image fusion process in which the TIR band is added to the visible and near infrared band was improved by 4.0%, compared to that using a band combination that does not consider the TIR band. For urban area landuse/landcover classification in particular, the producer’s accuracy and user’s accuracy values were improved by 10.2% and 3.8%, respectively. When MLC (Maximum Likelihood Classification), which is commonly applied to remote sensing images, was used, the TIR band images helped obtain a higher discriminant analysis in landuse/landcover classification.

역기전력에 무관한 가변 히스테리시스 밴드 전류 제어 (Adaptive Hysteresis Band Current Control Independent of the Back EMFs)

  • 김경화;조관렬;정세교;오동성;윤명중
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1992년도 하계학술대회 논문집 B
    • /
    • pp.1172-1175
    • /
    • 1992
  • The conventional adaptive hysteresis band current control technique has disadvantages such that on-line calculation of the hysteresis band is very complex, therefore, the adaptive hysteresis band must be stored in the look-up table. In this paper, a new simplified adaptive hysteresis band current control technique with phase decoupling is presented. The adaptive band is independent of the back EMFs. Using this adaptive band and the phase decoupled current error, the modulation frequency is fixed at nearly constant and the PWM inverter has optimal switching pattern.

  • PDF

RFID 대역에서 동작하는 이중 대역 전력증폭기 설계 (Design of Dual-Band Power Amplifier for the RFID Frequency-Band)

  • 김재현;황선국;박효달
    • 한국전자파학회논문지
    • /
    • 제25권3호
    • /
    • pp.376-379
    • /
    • 2014
  • 본 논문은 910 MHz와 2.45 GHz 대역에서 동작하는 RFID 트랜시버용 전력증폭기를 설계 및 제작하였다. 제안된 이중 대역 전력증폭기는 집중정수 소자로 구현된 910 MHz 대역의 정합 회로와 분포정수 소자로 구현된 2.45 GHz 대역의 정합 회로로 구성되며, 두 대역의 격리를 위하여 910 MHz 대역에 대하여 대역 제거 필터(band rejection filter)로 동작하고, 2.45 GHz 대역에서는 대역 통과 필터(band pass filter)로 동작하는 ${\lambda}/2$ 직렬 마이크로스트립 전송 선로로 구성되어 있다. 제작된 이중 대역 전력증폭기는 910 MHz와 2.45 GHz에서 이득이 각각 8 dB와 1.5 dB를 나타냈으며, 입력 전력 10 dBm을 인가하여 얻은 출력 전력은 두 대역 모두 20 dBm을 얻었다.

RELATIONSHIP BETWEEN FOREST STAND PARAMETERS AND MULTI-BAND SAR BACKSCATTERING

  • Shin, Jung-Il;Yoon, Jong-Suk;Lee, Kyu-Sung
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
    • /
    • pp.332-335
    • /
    • 2008
  • Newly developing SAR (Synthetic Aperture Radar) sensors commonly include high resolution X-band those data are expected to contribute various applications. Recent few studies are presenting potential of X-band SAR data in forest related application. This study tried to investigate the relationship between forest stand parameters and multi-band SAR normalized backscattering. Multi-band SAR data was radiometric corrected to compare signal from different forest stand condition. Then correlation coefficients were estimated between attribute of forest stand map and normalized backscattering coefficients. Although overall correlation coefficients are not high, only X-band shows strong relationship with DBH class than other bands. The signal of C- and L-band is composed of a large number of discrete tree components such as leaves, stems, even background soil. In forest, strength of radar backscattering is affected by complex parameters. Further study might be considered more various forest stand parameters such as canopy density, stand height, volume, and biomass.

  • PDF

콩나물 제조중(製造中) 질소화합물(窒素化合物)의 변화(變化)와 그 영양학적(營養學的) 연구(硏究) -제육보(第六報). 단백질(蛋白質)의 전기영동양상변화(電氣泳動樣相變化)- (Changes of Nitrogen Compounds and Nutritional Evaluation of Soybean Sprout -Part VI. Changes in electrophoretic pattern of protein-)

  • 양차범;박상기;윤석권;박훈
    • Applied Biological Chemistry
    • /
    • 제27권2호
    • /
    • pp.129-134
    • /
    • 1984
  • 콩나물을 온도별로 길러 생장과정별 단백질조성을 7.5% polyacryl amide gel 전기영동법으로 조사하고 조제표품단백질의 그것으로 동정하였다. 원료대두(大豆)에서는 주(主) band 5개(a,b,c,d 및 p)와 미소 band 10개가 나타났고 4일자자엽(日字子葉)에서는 8개의 주(主) band와 (o band포함)와 11개 미소 band로 최고 band수(數)를 보였다. 배축(胚軸)에서는 자엽(子葉)에서 발견(發見)되는 band들이 모두 나타났으나 분리(分離)가 선명치 못하였다. 생육이 경과함에 따라 자엽(子葉)에서는 a band가 먼저, b,c,d band가 다음으로 감소해 갔으며 미소 band o+p는 6일(日)까지 증가하다 그후 감소하였다. 배축(胚軸)에서는 모든 band가 계속 증가하였는데 미소 band와 b+c+d가 증가속도가 컸다. a band는 7S, b+c+d는 11S, o+p는 2S globulin으로 동정되었다. 생육온도가 높아짐에 따라 자엽(子葉)에서의 감소와 배축(胚軸)에서의 증가속도가 빨라졌으며 7S보다 11S가 촉진되었다.

  • PDF

CRLH 전송선을 이용한 소형 이중 대역 대역저지 여파기 (A Compact Arbitrary Dual-Band Band-stop Filter Using Composite Right/Left-Handed Transmission Lines)

  • 정승백;양승인
    • 대한전자공학회논문지TC
    • /
    • 제47권5호
    • /
    • pp.69-74
    • /
    • 2010
  • 본 논문에서는 CRLH 전송선을 이용하여 임의의 주파수 두 곳에서 저지 특성을 갖는 소형 이중대역 저지대역 여파기를 제안한다. 제안된 여파기는 CRLH 전송선을 단락된 병렬 스터브로 사용하였으며 CRLH 전송선의 비선형적인 위상응답을 이용하여 이중대역 저지 특성을 구현하였다. CRLH 전송선은 마이크로 스트립과 집중소자를 이용하여 구현되었다. 이 여파기는 작은 크기이며 저지되는 두 개의 주파수를 임의로 조정할 수 있다. 본 논문에서는 GPS대역과 ISM 대역을 저지하는 여파기를 설계하였으며 GPS대역에서는 -30dB, ISM대역에서는 약 -29dB 의 저지 특성을 확인하였다. 제작된 여파기의 크기는 10mm*15mm로 소형이다.