• 제목/요약/키워드: k-band

검색결과 10,566건 처리시간 0.037초

InfiniBand RDMA 기반 Apache Storm의 네트워크 구조 설계 (Design of InfiniBand RDMA-based Network Structure of Apache Storm)

  • 양석우;손시운;최성윤;최미정;문양세
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2017년도 추계학술발표대회
    • /
    • pp.679-681
    • /
    • 2017
  • Apache Storm은 대용량 데이터 스트림을 처리하기 위한 실시간 분산 병렬 처리 프레임워크이며, 이를 사용해 다수의 프로세스 및 스레드를 동시에 동작시킬 수 있다. 하지만, 이러한 멀티 프로세스 및 스레드 환경을 제공하는 Storm은 많은 네트워크 시스템 호출을 수행하고, 이는 잦은 문맥 전환(context switch), 운영체제로의 버퍼 복사, 운영체제 내의 버퍼 복사 등으로 인해 CPU 과부하 문제를 발생시킬 수 있다. 이러한 문제는 고성능 네트워크 장비인 InfiniBand의 IPoIB(IP over InfiniBand) 통신을 사용할 때, InfiniBand가 지원하는 대역폭(bandwidth) 대비 저용량 데이터의 송수신으로 인해 더 잦은 문맥 전환과 버퍼 복사가 발생하여 CPU 과부하 문제가 더욱 심각해진다. 따라서, 본 논문에서는 InfiniBand의 RDMA(Remote Direct Memory Access)를 Storm에 적용하는 설계안을 제시함으로써 CPU 과부하 문제를 해결한다.

Hot wall epitaxy방법에 의한 AgInS2 박막의 성장과 광전류 특성 (Growth and Photocurrent Properties for the AgInS2 Epilayers by Hot Wall Epitaxy)

  • 김혜숙;홍광준;정준우;방진주;김소형;정태수;박진성
    • 한국재료학회지
    • /
    • 제12권7호
    • /
    • pp.587-590
    • /
    • 2002
  • A silver indium sulfide ($AgInS_2$) epilayer was grown by the hot wall epitaxy method, which has not been reported in the literature. The grown $AgInS_2$ epilayer has found to be a chalcopyrite structure and evaluated to be high quality crystal. From the photocurrent measurement in the temperature range from 30 K to 300 K, the two peaks of A and B were only observed, whereas the three peaks of A, B, and C were seen in the PC spectrum of 10 K. These peaks are ascribed to the band-to-band transition. The valence band splitting of $AgInS_2$ was investigated by means of the photocurrent measurement. The crystal field splitting, $\Delta_{cr}$ , and the spin orbit splitting, $\Delta_{so}$ , have been obtained to be 0.150 eV and 0.009 eV at 10 K, respectively. And, the energy band gap at room temperature has been determined to be 1.868 eV. Also, the temperature dependence of the energy band gap, $E_{g}$(T), was determined.d.

척수손상 환자의 자세 변화 후 시간경과와 복대사용이 폐기능에 미치는 영향 (A Study on the Effect of Time Lapse After Position Change and Abdominal Band on Pulmonary Function in the Cervical Cord Injuries)

  • 이재호;박창일;전중선
    • 한국전문물리치료학회지
    • /
    • 제4권3호
    • /
    • pp.17-33
    • /
    • 1997
  • The objective of this study was to identify pulmonary functional variations in relation to postural changes, lapse after changing position, and the use of abdominal band in the cervical cord injured. The subjects of this study were 19 quadriplegic patients who had been admitted to the department of the Rehabilitation Hospital, College of Medicine, Yousei University, from April, 1997 through May 3, 1997. A spiroanalyzer was used to measure pulmonary function in supine, standing, time after changing position, and recording to the position, application method, and tightness of the abdominal band. The data were analyzed by the repeated measure one-way ANOVA, and Wilcoxon signed rank test. The findings were as follows: 1. All phase of the patients' pulmonary function improved significantly in supine posture in contrast to standing (vital capacity by $0.46{\ell}$ and expiratory reserve volume by $0.09{\ell}$). 2. The longer the time lapsed from supine posture to standing, the patient's expiratory reserve volume, maximum ventilation volume, vital capacity, and forced expiratory volume increased. 3. When the patient lay in supine position, the maximum ventilation volume, vital capacity, and the forced vital capacity increased then the center line of the abdominal band was placed along iliac crest; on the other hand, when the patient was standing, placing the bottom line of the abdominal band along iliac crest increased the maximum ventilation volume, vital capacity, and forced expiratory volume. 4. In placing the abdominal band in the patients, leaving space between the top and bottom lines of the band helped increased in maximum ventilation volume, vital capacity, and forced vital capacity for patient in supine as well as in standing. 5. When placing the abdominal band to patients in supine posture, reducing the length of the band by 2.5% along the patient's waist line increased the patients' vital capacity, while reducing the length by 10% to patients in standing increased the maximum ventilation volume. The abdominal band should be placed in such a way that the bottom part of the band should be more tightly fastened while leaving enough room for a hand to be placed in between the body and the band for the top part of the hand. It should also be noted that in a supine position, the bottom line of the band should be placed along the iliac crest, while in standing, the center line should be placed along the iliac crest. The length of the band should also be reduced by 2.5% of the waist line in supine position, and in standing, the length should be reduced by 10%. It should also be noted that the pulmonary function of the patients should be measured at least 10 minutes after one position change.

  • PDF

Validation of Significant Wave Height from Satellite Altimeter in the Seas around Korea and Error Characteristics

  • Park, Kyung-Ae;Woo, Hye-Jin;Lee, Eun-Young;Hong, Sungwook;Kim, Kum-Lan
    • 대한원격탐사학회지
    • /
    • 제29권6호
    • /
    • pp.631-644
    • /
    • 2013
  • Significant Wave Height (SWH) data measured by satellite altimeters (Topex/Poseidon, Jason-1, Envisat, and Jason-2) were validated in the seas around Korea by comparison with wave height measurements from marine meteorological buoy stations of Korea Meteorological Administration (KMA). A total of 1,070 collocation matchups between Ku-band satellite altimeter data and buoy data were obtained for the periods of the four satellites from 1992 to the present. In the case of C-band and S-band observations, 1,086 matchups were obtained and used to assess the accuracy of satellite SWH. Root-Mean-Square (RMS) errors of satellite SWH measured with Ku-band were evaluated to roughly 0.2_2.1 m. Comparisons of the RMS errors and bias errors between different frequency bands revealed that SWH observed with Ku-band was much more accurate than other frequencies, such as C-band or S-band. The differences between satellite SWH and buoy wave height, satellite minus buoy, revealed some dependence on the magnitude of the wave height. Satellite SWH tended to be overestimated at a range of low wave height of less than 1 m, and underestimated for high wave height of greater than 2 m. Such regional characteristics imply that satellite SWH should be carefully used when employed for diverse purposes such as validating wave model results or data assimilation procedures. Thus, this study confirmed that satellite SWH products should be continuously validated for regional applications.

마이크로웨이브 다중 대역 수신기용 Ku-대역 전압 제어 발진기 설계 및 구현 (Design and Implementation of Ku-Band VCO for Microwave Multi-Band Receiver)

  • 고민호;조호윤;박효달
    • 한국전자파학회논문지
    • /
    • 제20권9호
    • /
    • pp.853-861
    • /
    • 2009
  • X-대역, Ku-대역, K-대역 및 Ka-대역의 신호를 수신할 수 있는 다중 대역 수신기의 구조를 제안하고 이를 구현하기 위해서 요구되는 광대역 및 높은 출력 전력 특성을 갖는 전압 제어 발진기를 설계 제작하였다. 완충단을 갖는 전압 제어 발진기는 정상 상태 조건에서 발진부의 특성이 완충단에 의해 영향을 받지 않도록 발진부의 출력 임피던스와 완충단의 입력 임피던스가 직교 교차하도록 설계하였다. 제작한 전압 제어 발진기는 튜닝 전압 $0.0{\sim}8.0\;V$에서 $14.00{\sim}15.20\;GHz$ 대역폭을 나타내었고, $12{\sim}13\;dBm$ 출력 전력 특성을 나타내어 다중 대역 수신기에서 요구하는 특성을 만족하였다.

우렁쉥이 껍질성분 및 색소를 이용한 양식소재 개발 2. 우렁쉥이 껍질 중 부분정제한 황산다당의 화학적 특성 (Utilization of Pigments and Tunic Components of Ascidian as an Improved Feed Aids for Aquaculture 2. Chemical Properties of Sulfated Polysaccharides in Ascidian (Halocynthia roretzi) Tunic)

  • 홍병일;정병천;정우진;육지희;최병대;이강호
    • 한국수산과학회지
    • /
    • 제34권6호
    • /
    • pp.632-637
    • /
    • 2001
  • 우렁쉥이 껍질에서 분리한 황산다당을 부분정제하여 몇 가지 화학조성과 전기영동을 하였다. 추출된 황산다당의 화학적 조성은 sulfate, uronic acid, protein, chondroitin sulfate, amino sugar, hexosamine 등으로 이루어져 있었다. 전기영동결과 autoclave 처리에 의해 추출된 조다당류는 폭넓은 단일 band를 나타내었으나, neutrase 처리구는 세 개의 band로 구분되었다. Autocalve 처리구의 분자량은 약 40,000 정도로 추정되며, neutrase 처리구의 경우 고분자 band는 100,000 이상, 두 개의 저분자 band 중 하나는 약 22,000 정도, 또 하나의 band는 약 5,000 정도인 것으로 추정되었다. 이온교환수지 및 겔 여과하여 얻은 전당획분의 화학적 조성은 부분정제 전과 거의 유사하였다. Sephadex G-25로 gel 여과한 시료의 조성당은 arabinose, xylose 및 glucose는 흔적량 정도이었으나 galactose는 $71.4\%$로 대부분을 차지하였고, N-acetylgalactosamine 함량이 $14.5\%$ 정도이었고, D-glucuronic acid가 $6.3\%$ 정도 검출되었다. Sephadex G-100과 G-100-25로 정제한 당의 전기영 동 패턴은 거의 유사하게 단일 band의 양상이나 G-25 처리구가 다소 좁은 band를 나타내었다. 부분정제한 황산다당과 표준품인 chondroitin sulfates의 FT-IR spectrometer 분석 결과, 거의 유사한 결과를 나타내었다. 황산기나 에스테르 등 몇몇 중요한 원자단의 신축 진동수가 IR spectrum의 지문영역 ($500\sim700cm^{-1}$$)에서 나타났다. 황산기 중의 S=O 신축진동이 $1,240cm^{-1}$에서, C-O-S신축진동의 경우 수평향배는 $820cm^{-1}$에서 나타났다.

  • PDF

광대역 위성 통신/방송용 삼중 대역 이동형 안테나 시스템 설계에 관한 연구 (A Study on Mobile Antenna System Design with Tri-band Operation for Broadband Satellite Communications and DBS Reception)

  • 엄순영;정영배;손성호;윤재승;전순익
    • 한국전자파학회논문지
    • /
    • 제17권5호
    • /
    • pp.461-475
    • /
    • 2006
  • 본 논문은 Ka/K 통신 대역 및 Ku 방송 대역에서 동작하는 무궁화 3호 정지 궤도 위성을 이용하여 화상 전화, 인터넷과 같은 위성 멀티미디어 및 방송 서비스를 제공하는 이동체 탑재형 안테나 시스템 설계에 관한 것이다. 앙각 방향으로 팬 빔 특성을 갖는 안테나 시스템의 방사부는 준-오프셋 이중 성형 반사판과 삼중 대역 급전기로 구성된다. 또한, 삼중 대역 급전기는 돌출 유전체 막대를 이용한 Ka/K 이중 대역 급전기 및 원형 편파기, 직교 모드 변환기 그리고 Ku 대역 원형 편파 급전 배열로 구성된다. 특히, Ka/K 이중 대역 원형 편파기는 제작이 용이한 comb 구조를 사용하여 구현되었다. Ku 대역 급전 배열은 이동시 위성을 고속으로 추적하기 위하여 전자 빔을 형성할 수 있는 $2{\times}2$ 능동 위상 배열 구조를 갖는다. 그리고, 급전 배열에서 $90^{\circ}$ 하이브리드 결합기를 이용하여 원형 편파를 생성하는 4개의 방사 소자들을 $90^{\circ}$씩 회전하여 배열함으로써 원형 편파 특성을 개선하였다. Ku 대역 전자 빔을 생성하는 4개의 빔 성형 채널은 출력에서 주 빔 채널 및 추적 빔 채널로 구분되며, 각 채널의 내부 구성 유니트들의 잡음 온도 기여도를 바탕으로 채널 잡음 온도 특성을 분석하였다. 제작된 안테나 시스템으로부터 측정된 Ka 송신 채널의 $P_{1dBc}$ 출력은 34.1 dBm 이상, K/Ku 수신 채널의 잡음 지수는 각각 2.4 dB 및 1.5 dB 이하의 전기적인 성능들을 보여주었다. 안테나 시스템은 근접 전계 측정 방법을 사용하여 삼중 대역에서의 주 편파 및 교차 편파 방사 패턴들을 측정하였다. 특히, Ku 대역의 방사 패턴 측정은 급전 배열들의 독립 여기에 의한 부분 방사 패턴들을 측정하여 각 능동 채널들의 초기 위상들을 보정한 후 이루어졌다. 안테나 시스템의 Ka/K/Ku 대역에서 측정된 안테나 이득은 각각 39.6 dBi, 37.5 dBi, 29.6 dBi 이상이었으며, 그리고 Ka 대역 송신 EIRP는 43.7 dBW 이상, K/Ku 대역 수신 감도 G/T는 각각 13.2 dB/K와 7.12 dB/K 이상의 우수한 시스템 성능들을 보여주었다.

의료용 무선 중계 시스템용 이중 대역 인체 부착형 안테나 설계 (Design of a Dual-Band On-Body Antenna for a Wireless Medical Repeater System)

  • 권결;탁진필;최재훈
    • 한국전자파학회논문지
    • /
    • 제24권3호
    • /
    • pp.239-246
    • /
    • 2013
  • 본 논문에서는 MICS(Medical Implant Communication Service, 402~405 MHz)와 ISM(The Industrial, Scientific and Medical, 2.40~2.485 GHz) 대역에서 동작하는 의료용 무선 중계 시스템을 위한 이중 대역 인체 부착형 안테나를 제안하고, 인체의 영향을 고려한 안테나 성능에 대한 분석을 하였다. 제안된 안테나는 ISM 대역에서 동작하는 윗면의 패치와 MICS 대역에서 동작하는 바닥면의 패치로 구성되어 있다. 안테나가 실제 인체에 착용되어 사용되는 상황을 고려하고, 인체가 안테나에 미치는 영향을 분석하기 위하여 모의 인체를 이용하여 시뮬레이션과 측정을 수행하였다. 제안된 안테나의 반사 손실은 MICS 대역과 ISM 대역에서의 요구 대역폭을 만족하였고, 측정된 최대 이득은 MICS 대역과 ISM 대역에서 각각 -12.47 dBi, 1.71 dBi이었다. 제안된 안테나의 방사 패턴은 MICS 대역에서 인체 내부 지향성, ISM 대역에서 인체 외부 지향성을 가지며, 반사 손실 특성은 인체의 영향에 매우 둔감하므로 의료용 무선 중계 시스템용 인체 부착형 안테나로 활용되기에 적절할 것으로 사료된다.

X-band SAR 위성영상의 3차원 위치결정 기법 평가 - 레이더 간섭기법, Radargrammetry, RPC를 중심으로 (Evaluation of 3D-Positioning Method Using X-band SAR Satellite Images - Focused on InSAR, Radargrammetry and RPC)

  • 송영선;이정한;장인태
    • 대한공간정보학회지
    • /
    • 제22권4호
    • /
    • pp.117-125
    • /
    • 2014
  • 2013년 우리나라 최초의 X-band SAR 위성인 KOMPSAT-5가 발사되었고, KOMPSAT-5의 활용성 측면에서 X-band SAR 위성영상에 대한 연구가 필요한 상황이다. 본 연구에서는 X-band SAR 위성영상에 대해서 수치표고모델을 생성할 수 있는 세 가지 기법(레이더 간섭기법, radargrammetry, RPC)을 적용하여 수치표고모델을 생성하고, 각 기법별 정확도 및 장단점을 평가하였다. 실험 위성영상으로 대전지역을 촬영한 4장의 stripmap mode TerraSAR-X 영상을 이용하였고, 정확도 평가를 위해서 IKONOS 입체영상으로부터 생성된 수치표고모델을 이용하였다. 평가결과, 레이더 간섭기법으로 제작한 수치표고모델이 가장 높은 정확도를 보였고, 지형의 기복이 심한 넓은 지역에 대하여 수치표고모델을 생성하고자 할 경우에는 RPC를 이용하는 것이 효과적인 기법임을 알 수 있었다.

SIR을 이용한 제 2저지 대역 제어 가능 UWB 안테나 (A UWB Antenna with the Adjustable Second Rejection Band Using a SIR)

  • 최형석;최경;황희용
    • 한국전자파학회논문지
    • /
    • 제23권9호
    • /
    • pp.1019-1024
    • /
    • 2012
  • 본 논문에서는 SIR(Step Impedance Resonator)을 이용하여 제 1저지 대역인 5 GHz WLAN 대역의 신호 간섭을 제거하며 제 2저지 대역을 제어할 수 있는 UWB 안테나를 제안하였다. SIR은 단일 임피던스 공진기와는 다르게 Step Impedance의 차이로 제 2고조파가 정해지는 특징이 있으므로 UWB 안테나에 적용하여 제 2저지 대역을 제어 가능하도록 하였다. 또한, 제 1저지 대역에서 안테나의 동작을 등가 회로로 나타내었으며, SIR의 등가 모델값 및 안테나와 SIR의 결합 값을 구하였다. 제안된 안테나는 UWB 전체 대역에서 -10 dB 이하의 반사 손실 특성과 5 GHz WLAN 대역에서 저지 특성을 나타내었다. 또한, H-평면에서 +y방향으로 지향성을 나타내며, 1.0 ns 이내의 군지연 변화 특성을 나타내었다.