• 한국수산과학회지
• /
• 제55권2호
• /
• pp.195-206
• /
• 2022

The separation of spectrally overlapped broadband echo signals from free-swimming Japanese needlefish Hypohamphus sajori using the fractional Fourier transform (FrFT) was investigated. The broadband echo signals were measured over frequency ranges of 40-80 and 110-220 kHz. The overlapped echo signals were separated after eliminating noise signals in the smoothed pseudo-Wigner-Ville distribution domain. The echo signal from a 40 mm WC sphere suspended just below a chirp transducer was used to calibrate the broadband of the chirp echo sounder and estimate the frequency dependence of target strength for the separated echo signals. The experimental results show that the proposed FrFT method can analyze the time-frequency image of broadband echo signals from free-swimming individual fish effectively and can be used as a quantitative tool for extracting the acoustic features used for fish species identification.

• 한국경제지리학회지
• /
• 제7권2호
• /
• pp.261-281
• /
• 2004

전북지역 자동차산업 입지는 1990년대 초반 양적성장단계에 접어든 완성차업체의 저렴한 생산공간 확보전략과 정부의 선도기업 입지에 의한 지역균형발전 개발정책에 의해 이루어졌다. 그 결과 부품산업의 기반 없이 완성차업체가 입지한 후 부품 및 소재업체가 입지하는 반대되는 발전 패턴을 취하고 있기 때문에 취약한 지역산업의 구조적인 문제점을 보이고 있다. 우선, 지역 부품산업의 계층적인 구조가 정립되지 않아 효율적인 분업생산체제를 갖추지 못하여 많은 부품을 외부지역에 의존하고 있다. 그리고 대부분의 부품업체는 특정 완성차업체에 전속되어 있으며, 지역 부품산업의 대부분은 단순 임가공을 필요로 하는 저부가가치 업종으로 이루어져 있다. 마지막으로, 다른 지역에 비해 상대적으로 연관산업의 집적도가 낮아 기업유치 경쟁력이 낮은 문제점 등을 가지고 있다. 자동차산업을 지역산업으로 특화시켜 지역경제발전을 도모하기 위해서는 연관산업의 공간적 집적을 이루어 생산과정의 유연화를 창출해야 할 것이다. 최근 자동차산업은 적기조달방식과 모듈생산의 진전으로 완성차업체와 부품업체간의 지리적 근접성이 중요한 입지결정 요인으로 작용하고 있으며, 모듈생산방식은 기존의 공장에서 시도되기 보다는 새롭게 개발된 공장에서 주로 시도되고 있는 것으로 나타나고 있다. 따라서 지역단체는 우호적인 기업환경의 조성과 적극적인 기업유치전략을 통해 모듈화된 부품공급이 가능하도록 집적화된 산업단지의 육성을 도모해야 할 것이다.

• 산업경영시스템학회지
• /
• 제35권4호
• /
• pp.83-97
• /
• 2012

In this paper, we consider a single-manufacturer single-buyer supply chain problem where a single manufacturer purchases and processes raw materials into a family of items in order to deliver a family of items to a single buyer at a fixed interval of time for effective implementation of Just-In-Time Purchasing. An integrated multi-item lot-splitting model of facilitating multiple shipments in small lots between buyer and manufacturer is developed in a JIT Purchasing environment. Previous research on the integrated model assumed that the manufacturer orders raw materials m (integer) times for every production run (lot multiplier policy for the raw material). In this paper, we consider a generalized policy in the replenishment of raw materials, allowing lot multiplier policy and lot splitting policy. An iterative solution procedure is developed to find the order interval for finished goods and raw materials, and number of shipments between buyer and manufacturer. We show by numerical example that when the integrated policy is adopted by both buyer and manufacturer in a cooperative manner, both parties can benefit.

• 한국정보통신학회논문지
• /
• 제26권2호
• /
• pp.321-324
• /
• 2022

The Korean halibut farming industry suffer from price instability and demand decrease due to various environmental and social issues. It is urgent to predict the appropriate amount of halibut production. However, it is not easy for employments working in the halibut farming industry to handle statistical tools in order to perform the prediction. In this paper, we implemented a Excel-based regression analysis tool that allows users to get a regression analysis result by just entering historical data in a sheet. Our tool will reduce workloads of employments working in the halibut farming industry by enabling them to perform a regression analysis with Excel on-the-fly. This study expect that by using the tool the halibut farming industry cope actively with the real-time change in the industry.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권11호
• /
• pp.1574-1580
• /
• 2009

To evaluate the effect of different housing systems on sow behavior, 80 gilts were randomly allocated at puberty to four treatments: i) sow stall in gestation followed by farrowing crate (SC), ii) group housing with individual feeding in gestation followed by farrowing crate (GC), iii) ESF (Electronic Sow Feeding) system in gestation followed by farrowing crate (EC), and iv) ESF system followed by group farrowing pen (EG). Behavioral observations were carried out on a total of 16 animals per treatment at the following stages: first day of allocation to housing treatment, day of service, 80 days after service, 109 days after service on entry to farrowing accommodation, 24 h before farrowing, day of farrowing, 14, 27 and 28 days after farrowing, at weaning. On each occasion, individual animals were observed for a 24 period with one minute time sampling. There were significant differences (p<0.001) between stages of the reproductive cycle for all the behavior patterns in all treatments. On the first day in experimental housing treatments, sows spent more time rooting and dog-sitting. Activity and investigatory behavior decreased as pregnancy progressed. An activity peak was apparent just before farrowing, followed by a high level of inactivity on the day of farrowing. Time spent active, eating and drinking increased as lactation progressed, and greatest activity and locomotion was seen immediately following weaning. There were significant differences between housing treatments (p<0.01) for standing, moving, eating, drinking, dog-sitting and lying. During pregnancy SC sows spent more time standing, rooting, drinking and dog sitting, while EC sows spent less time rooting and drinking and more time lying. During lactation, GC sows spent more time standing, moving and eating, less time dog sitting and lateral lying. Nursing frequency was reduced in GC sows (p<0.001). The maternal and piglet behaviors were influenced strongly by environment during lactation. However, it was also shown that previous housing history can influence the maternal behavior in the pre-farrowing stage and during early lactation.

• 대한안전경영과학회지
• /
• 제19권1호
• /
• pp.203-210
• /
• 2017

Companies are pursuing the management of small quantity batch production or JIT(Just-in-time) system for improving the delivery response and LOB(Line Balancing) in order to satisfy consumers' increasing demands in the current global economic recession. And in order to improve the growth of production for reducing manufacturing cost, improvements of the Load Balancing have become an important reformation factor. Thus this paper is aimed at warehouse which procures materials on the assembly line in procurement logistics of automotive logistics and proceed with research on heuristic algorithm development which can increase the Load Balancing of workers. As a result of this study, when applied the primary target value, it was verified that the whole workers decreased from 28 to 24. Furthermore, when specified the secondary target value and applied algorithm once more, it was verified that the Load Balance Ratio was improved from 44.96% to 91.7%.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.137-153
• /
• 2002

Viewed as a more systematic approach of creating high quality products and bringing them into market at a lower cost and in significantly less time, it attracts the attention of quality designers to quality function deployment (QFD) approach. In attempt to reduce the design cycle, the industry has responded with concurrent design effort. In a sense, concurrent engineering refers to the integration of various activities within the broad scope of the product life cycle ［17］. Over the last ten years, much has been written about QFD but little has been available in terms of the underlying guide methodology. The methodology of QFD is quite simple and many will say that they have done it in the past but just have not formalized it into the form that this discipline requires. QFD ties the product, user, value, and manufacturing viewpoints together in a continuous process of defining the product design and manufacturing requirements. The value viewpoint recognizes the cost to obtain certain functionality, and the manufacturing viewpoint addresses conformance to requirements, but in a broader sense, the variability in production. In this paper, the QFD system acquisitions are described, and two heuristic approaches solving for the complex design process, especially the size reduction of design process and precedence-constrained relationship in QFD are proposed, and the empirical example is illustrated.

• 한국실내디자인학회논문집
• /
• 제21호
• /
• pp.54-61
• /
• 1999

The Fashion Distribution Business (FDB) is thriving to such an extent that the current period is called "The Era of Fashion." This FDB shows tendencies towards specialzation, globalization and expansion. The domestic FDB has been rapidly globalizing, and thus it is time for us to recognize that the fashion business has grown beyond its former role as a production-oriented retail business to include multiple new roles. This strategy to plant Store Identity on customers is just a Visual Merchandising (VMD) Strategy. That is, a strategy to visualize the Product Planning, which can be called a Complex Visual Expressing Technical System that classifies and arranges products in order to be easily seen, chosen, and bought through exhibition and arrangement. My aim is to break away from the conept that has been focused only on display division and to present product scheme correctly and to establish a VMD Plan which can also contribute to sales promotion by providing infirmation and arranging Store Display efficiently for customers. Additionally, this is aimed to present an efficient and sensitive design process.esign process.

• 복식
• /
• 제65권3호
• /
• pp.15-27
• /
• 2015

This study is the first research that examines the fashion manufacturers and merchants of the late 18th century France. Fashion specialists, (known as) Marchande de modes, started to appear in literature in the mid 18thcenturyandthe profession was officially recognized by the guild system in 1776. Rose Bertin was elected as the first representative. At the same time, there were two types of fashion specialists, tailleur and couturi${\grave{e}}$re. Tailleur had monopolized the production of the bodice and the skirt, which were the most important female dress parts. On the contrary, couturi${\grave{e}}$re only had the right to make petticoats, but they were not allowed to decorate it. In 1781, the couturi${\grave{e}}$re obtained the right to make and decorate the other parts of the dress, and this resulted in the two groups fighting over the rights to make dresses. And during this struggle, the Marchand de modes started to appear as a new occupation. Marchande de modes were privileged fashion merchants making or selling trimmings for dress and coiffure, and had authority to make capes and bonnets. Contemporary critics praised their talents for creating innovative and beautiful fashion styles, while some criticized them as women who just made luxury items. These records revealed how marchande de modes were viewed during that time.

• 한국정보처리학회논문지
• /
• 제3권1호
• /
• pp.1-8
• /
• 1996

골판지 제조업체의 특성은 다품종 소량 가공산업이며, 단납기, JIT(Just In Time) 성의 산업으로서 고객의 서비스 요구를 충족시키며 기업의 이윤을 극대화하기 위해서 는 무엇보다도 철저한 물류 유통관리를 통한 물류비 절감이 중요하다. 특히 공장 내부에서 물류는 각 공정들의 가동율 및 생산성 향상에 막대한 영향을 미치고 있다. 최근 골판 지 제조업체들은 공정간의 물류를 효율적으로 운영하여 가동율을 높이고, 공정사의 재고 를 최소화시키는 역할을하는 컨베이어 시스템에 관심을 갖게 되었다. 그런데 본 사례 의 컨베이어 시스템은 컨베이서의 적체와 종종 수작업 운영으로 인하여 시스템의 목적을 달성할 수 없는 문제점이 발견되었다. 제조시스템의 성능평가에는 경제적, 정성적, 그리고 기술적 평가방법이 있다. 본 연구는 기술적 평가방법중 시뮬레이션을 통하여 골판지 제조업체의 컨베이어 시스템의 성능을 평가 하는 것이다. 컨베이어 시스템에서 고루게이터 및 제상기 공정의 가동율, 컨베이어의 적재율의 문제점을 해결하는 각 대안에 대한 시뮬레이션을 통하여 예상 적재량, 공정들의 가동율 등의 결과를 분석하 였다. 최적방안으로 컨베이어를 추가 설치하고, 공정들의 가동시간을 조정하는 대안을 제시하였다.