• Journal of Plant Biotechnology
• /
• 제4권1호
• /
• pp.23-27
• /
• 2002

To establish an in vitro mass production system of grape anthocyanin pigments through callus and cell suspension culture, the effects of nitrogen source and sucrose on fresh weight and anthocyanin production in cell suspension culture of 'Sheridan' grape level were studied. When the medium was devoid of $NO_3^-$, cell fresh weight was either remained stable (1% sucrose) or slightly decreased with culture time (2,3, and 4% sucrose). When $NH_4^-$ was lacking, 3% sucrose was most favorable for cell growth. When $NH_4^-$ was supplied as N source, the anthocyanin content of 2% sucrose containing medium was maintained 2 times higher than other levels till day 8 in culture, then that of 3 and 4% sucrose which peaked at day 12 thereafter. The anthocyanin content was low than $NO_3^-$-free media. Total anthocyanin content in $NH_4^-$-free medium was just about a half of that of $NH_4^+$ medium. Anthocyanin production of 2% sucrose in $NH_4^+$ medium was maintained about 3-fold till day 8, then decreased thereafter. In $NH_4^+$ medium, pH decreased gradually with final pH of 3.5 to 4.0, while pH in $NH_4^+$-free medium increased with final pH of 6.5 to 7.5.

• Composites Research
• /
• 제34권2호
• /
• pp.96-100
• /
• 2021

The lightweight industry continuously demands reliable near-net-shape fabrication where the preform just out-of-machine is close to the final shape. In this study, different half-finished preforms are made π-beams. Then the preforms are unfolded to make a 3D shape with integrated structure of fibers, providing easier handling in the further processing of composites. Several 3D textile preforms are made using weaving technique and are examined after resin infusion for mechanical properties such as inter-laminar shear strength, compressive strength and tensile strength. Considering that the time and labor are important parameters in modern production, 3D weaving technique reduces the manufacturing steps and therefore the costs, such as hand-lay up of textile layers, cutting, and converting into preform shape. Hence this 3D weaving technique offers many possibilities for new applications with efficient composite production.

• Journal of Ginseng Research
• /
• 제9권2호
• /
• pp.146-153
• /
• 1985

This study was conducted to know the effect of vinyl mulching from the sowing to germination on the seedbed for germination and production of seedling. Embryo growth was restrained with decreasing the water content in seed and stopped below 10% water content. Germination was possible over 55% water content but radicle growth was stopped at 55% water content. Ratioes of embryo / emdosperm length were about 50% at seeding time, and about 80% at just before freeing season, and the ratio was increased from the thawing season again. Vinyl mulching increased the soil water content and soil temperature. Germination rate and number of available seedling in vinyl mulching were increased 10% and 12%, respectively.

• 한국식품조리과학회지
• /
• 제24권5호
• /
• pp.580-592
• /
• 2008

The principal objective of this study was to develop a standardized recipe for the large-scale production of Bibimbab, bean sprout bab, and fried rice. The recipe was standardized as follows. We collected and recorded the quantities of ingredients and production procedures currently used by cooks in the contracted foodservice management company and in hotel-based Korean restaurants. According to the food preferences of Koreans, we selected 3 rices; Bibimbab, bean sprout bab, and fried rice. We then developed a revised recipe and evaluation form. Our sensory evaluation was conducted by 30 taste panels using a JAR(just- about-right) scale. We developed a standardized recipe for 3 rices. Yield, portion size, temperature, preparation time, equipment, cost, ingredients, weight of ingredients, method, and critical point were recorded in the developed recipe. We utilized the factor method and the percentage method for recipe adjustments, and we devised a direct measurement table for Bibimbab, bean sprout bab, and fried rice.

• 산업경영시스템학회지
• /
• 제40권1호
• /
• pp.79-86
• /
• 2017

This research focused on deciding optimal manufacturing WIP (Work-In-Process) limit for a small production system. Reducing WIP leads to stable capacity, better manufacturing flow and decrease inventory. WIP is the one of the important issue, since it can affect manufacturing area, like productivity and line efficiency and bottlenecks in manufacturing process. Several approaches implemented in this research. First, two strategies applied to decide WIP limit. One is roulette wheel selection and the other one is elite strategy. Second, for each strategy, JIT (Just In Time), CONWIP (Constant WIP), Gated Max WIP System and CWIPL (Critical WIP Loops) system applied to find a best material flow mechanism. Therefore, pull control system is preferred to control production line efficiently. In the production line, the WIP limit has been decided based on mathematical models or expert's decision. However, due to the complexity of the process or increase of the variables, it is difficult to obtain optimal WIP limit. To obtain an optimal WIP limit, GA applied in each material control system. When evaluating the performance of the result, fitness function is used by reflecting WIP parameter. Elite strategy showed better performance than roulette wheel selection when evaluating fitness value. Elite strategy reach to the optimal WIP limit faster than roulette wheel selection and generation time is short. For this reason, this study proposes a fast and reliable method for determining the WIP level by applying genetic algorithm to pull system based production process. This research showed that this method could be applied to a more complex production system.

• 한국정보통신학회논문지
• /
• 제18권9호
• /
• pp.2079-2086
• /
• 2014

조선소에서 생산관리는 생산성 향상과 가장 밀접한 업무 중의 하나이다. 현업 생산관리자와 공정계획 엔지니어들은 상호 간의 정보 공유 미흡으로 인해 공정계획 및 공정관리에 대한 충분한 생산정보를 얻지 못한다. 본 연구에서는 생산계획과 공정관리의 요구사항 분석을 통하여 생산공정모니터링 시스템에 대한 주요 이슈를 도출하고, 콤포넌트 기반 설계 기법을 활용하여 시스템 아키텍처를 수립하였다. 제안한 시스템의 주요 기능은 블록 조립에서 안벽의장 단계까지 수립하여 생산공정현황을 시각적으로 보여 줄 뿐 아니라 공정정보 공유를 극대화하는 것이다. 본 시스템은 생산관리자에게 신뢰성 있고 정확한 생산 정보를 제시간에 제공할 수 있을 것으로 기대된다.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.425-432
• /
• 2004

This study for Customer Satisfaction(Customer Focus) by Profit security' in the field Process improvement activity and man-power upgrade in the learning of organization activity or upgrading ability of each peoples. This thesis study on the focus of KAPEC which introduce Toyota system can apply to VM, 3jeong, Right Box and Right Position), 5S, JIT(Just In Time), KAlZEN, KANBAN System, CIM, ERP, DAS an output of Factory. For strategic changes to take place in industry 3 key important factors need to be included ; integration of tasks functions and process, decentralization of information and responsibility and finally simplification of products and product structures. These describes how CIM can be implemented using these factors. This study for (1)System Integration, (2) Help Logistic Problems, (3) Partly facilitated growth. (4) Improved production planning (5) Real-time management. (6) Fast reporting (7) Productivity. Quality. Delivery Up, Cost reduction and Autonomy management, FMS in the Plant etc.

• 산업공학
• /
• 제7권3호
• /
• pp.171-180
• /
• 1994

Defined is a Multi-level Parallel Machine Flow-Shop (MPMFS) which reflects some real world manufacturing situations. Just-In-Time (JIT) philosophy is applied to the MPMFS scheduling in order to achieve lowering work-in-process inventory level as well as meeting due dates. A schedule generating simulator is developed. The latest start time of each operation is determined by a backward simulation followed by another forward simulation to analyze the schedule feasibility and actual inventory level. Reasonable schedules are available through adjusting some parameters for allowance factors such as set-up times of machines and other environmental changes. The SLAMSYSTEM under Window is employed for this processing with some input/output data handling processes devised under DOS.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 추계학술발표대회 논문집
• /
• pp.84-88
• /
• 2007

Movie has a light, colors, and texture in the space and a design. Movie is a ovation of the 3-dimensional reality with time and space. Just like a movie, a space can also express time, personality of characters and background stories. Symbolization of a space tells philosophy and emotions, making meaning of the space abundant and consistency in entire composition of the space. Expression of beauty through order of space inside proves meaning of space. Think that can do and present to production methodology of space design to universalize ureas through symbolic productions that is based on story.

• 한국환경보건학회지
• /
• 제19권3호
• /
• pp.17-21
• /
• 1993

Characteristics of a downflow anaerobic packed bed reactor with raschig ring ceramics as a packing were measured and discussed for the basic evaluation of the process. A synthesized glucose substrate wastewater were used as a feed and process characteristics such as pH, biogas production, composition of produced gas, COD removal and VSS were measured with the hydraulic retention time (HRT) changing from 0.25 to 2 days. As a result, this type of reactor was applicable in continuous operation within the given HRT range and the transient period approaching the steady state was about 20 days. The content of methane in produced gas increase with HRT was always high above 50% enough to use as energy source. The COD removal efficiency increased gradually as HRT increased. The axial profile of VSS concentration in the reactor usually showed the maximum at the lower region and the minimum at the middle. The VSS concentration at the upper region and the exit appeared similarly. However, at 0.25 day of HRT, the VSS concentration of effluent became higher than that of the upper region. Therefore the optimum HRT of this reactor occurred about 0.5 day, at which the production of methane began to be just stabilized and loss of VSS and COD removal were resonable.