• 대한안전경영과학회지
• /
• 제6권3호
• /
• pp.187-196
• /
• 2004

By successful establishment of Supply Chain Management System they should make the supply chains speedy and combine production information system with the outcome system and thus they reinforce the competition of the production system of local enterprises in accordance with the rapid decision making. Supply chain coordination improves if all supplier of chain take actions that together increase total supply chain profits. To design of Modularity by the grouping supplier, the proposed method is to develop the most appropriate production system models through the reflection of JIT system in the Supply Chain Management which is necessity of the times and its importance. The objects of this study is to develop the most appropriate production system Model and optimal profit model in the process line and to provide the enterprises with the models which are based on the Supply Chain Management.

• 산업공학
• /
• 제6권1호
• /
• pp.47-54
• /
• 1993

Sequential Numbering System(SNS) is one of the production and inventory management system, which is more effective and practical to minor enterprises than Material Requirement Planning (MRP) system or Just-in-Time(JIT) system. The purpose of the paper is the structured analysis of SNS as the first phase of software development. Data Flow Diagram(DFD), Data Dictionary(DD), and Mini-Specs are used to analyze the system through the second level. The result can be exploited to SNS software design and programming.

• 산업경영시스템학회지
• /
• 제28권1호
• /
• pp.64-71
• /
• 2005

The purpose of this study is to propose guidelines for introducing the Just-In-Time (JIT) production system to enhance the competitiveness of Korean manufacturing companies. This study employed an extensive survey on the use of the JIT production systems among different korean manufacturing companies to understand the current status of the JIT production system in use and to identify the benefits from implementing JIT production system. The survey has covered 170 manufacturing companies of different sizes from various sectors of Korean industries including electronics, automobiles, machineries, and textiles. In conclusion, our research results support that the JIT production system would contribute to increase the manufacturing performances of Korean manufacturing companies through lower inventory level and increased quality level.

• 대한산업공학회지
• /
• 제25권4호
• /
• pp.411-420
• /
• 1999

A mixed model production line is a production line where a variety of product models are produced. In U-shaped production lines (called U-lines) used in just-in-time production system, the strategy of mixing product models is often used to provide various types of products to customers in time. Line balancing and model sequencing problems are important for an efficient use of mixed model U-lines. Although the two problems are tightly interrelated with each other, prior researches have considered them separately or sequentially. This paper presents a new method using a coevolutionary algorithm that can solve the two problems at the same time. To promote diversity and search efficiency, in this paper the evolutionary system is based on the localized interactions within and between populations. Methods of selecting environmental individuals and evaluating fitness are developed. Efficient genetic representations and operator schemes are also provided. When designing the schemes, we take into account the features specific to the problems. The experimental results demonstrate that the proposed algorithm is superior to existing approaches.

• 지역연구
• /
• 제8권1호
• /
• pp.119-130
• /
• 1992

Many of the industrialized countries since the 1970s have been experiencing the change in the industrial structure due to technological development, that is, from Fordism to post-Fordism, or to "flexible production system". Regional development has been undergoing some changes according to the different industrial production systems. During the Fordist mass production period, the manufacturing belt was the core region of the production system. As the system shifts to flexible production system of which characteristics are veritcal disintegration, emphasis for JIT(just-in-time) delivery system, part-time and short-time labor contracts, design-intensive industries, etc, the new system requires the new production core and has produced the new industrial spaces, such as Sunbelt cities, suburbs, small-or medium-sized cities, and non-metropolitan areas. In the perspective of global system, the Fordist production system made th NICs developed, because the mass production required many unskilled and low-wage workers. As the NICs exports of manufactured goods have incredibly expanded during the 1970s, the industrialized countries have become threatened. The industriablized countries have restructured their economies and international policies. Such restructures resulted in the economic depression of the NICs. The investment pattern of the industrialized countries has changed and particularly those industries adopting the Post-Fordism have invested from the NICs to the peripheral areas of their own countries or toward the underdeveloped countries which have much lower wage workers. The investment pattern of the NICs is also undergoing some changes like from metropolitian areas to small or non-metropolitan regions. The regional development since the post-Fordist production is still going on, thus it is not possible to generalize the tendency. That could be a particular phenomenon or a stage in the long-term cycle. But the regional development in the world system since 1980s definitely shows the different pattern.t pattern.

• 한국산학기술학회논문지
• /
• 제7권2호
• /
• pp.251-256
• /
• 2006

본 논문은 다단계, 다품종 조립라인을 고려한 모델이며 JIT 생산시스템에서의 최적의 발주량 계산을 목적으로 하고 있다. 제안 모델의 목적함수는 재고비와 setup 비의 합이 최소화되도록 설계되어 있다. 이는 대부분의 자동차 부품회사의 경우 setup 공정을 포함하고 있기 때문이다. 마지막으로 수치실험을 통해 제안 모델의 유효성을 보여 주고 있다.

• 대한산업공학회지
• /
• 제20권3호
• /
• pp.93-104
• /
• 1994

One of the typical assumptions of the studies to determine economic production quantity is that yield rate of a given manufacturing process is 100% or constant after setup. However, in the real world, there are many manufacturing processes of which yield rates are quite low just after setup and then increasing with time until they reach the target rates which are set strategically. This period is usually called "stabilization period". During the stabilization period, defectives are produced, which incur cost (defective cost). In this study, an optimal production quantity for this situation is presented. Also, it is shown that defective cost acts like setup cost and therefore, increases the economic production quantity.

• 한국식품조리과학회지
• /
• 제24권5호
• /
• pp.682-690
• /
• 2008

The principal objective of this study was to develop a standardized recipe for the large-scale production of Salbob and Ogokbob. The recipe was standardized as follows: we collected and recorded the amount of ingredients and production procedures currently being used by cooks in the contracted foodservice management company and hotel-based Korean restaurants. According to the food preferences of Koreans, we selected 2 kinds of rice; Salbob and Ogokbob. We developed a revised recipe and an evaluation form. We conducted a sensory evaluation with 30 panels, using a JAR (just-about-right) scale. We developed a standardized recipe for both kinds of rice. Yield, portion size, temperature, preparation time, equipment, cost, ingredients, weight of ingredients, method, and critical point were all components accounted for in the developed recipe. The factor method and the percentage method were proposed techniques for adjusting the recipe, and a direct measurement table for Salbob and Ogokbob was also devised.

• 산업경영시스템학회지
• /
• 제17권32호
• /
• pp.155-162
• /
• 1994

The Japanese "Just-In-Time" technique reduces inventory and unnecessary factors. This technique makes the success of Japanese firms, therefore many Korean firms try to apply it to their situation. But the technique doesn't bare the same success in Korean firms. This paper, therefore, considers the different situations between Korean rim and Japanese firm, then simulates the Pull system and Push system for a multiline, multistage production system. This paper drives the different results of simulation according to variable processing times, variable demand, set-up time and shortages in Pull system and Push system using GPSS. The results show that the performance of Pull system is lower than Push system's in variable master production scheduling and variable processing times.ing times.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1997년도 Proceedings International Workshop on New Video Media Technology
• /
• pp.75-81
• /
• 1997

A new DTPP (Desk-Top Program Production) system has been developed that enables multiple program producers (directors) working at different locations to collaborate over a computer network and prepare a single program for broadcasting. In this system, information is shared among users by exchanging data edited on non-linear editing terminals in program post-production work over a network in real time. In short, the new DTPP system provides a collaborative work space for producing TV programs. The system does not make use of a special server for collaborative work but rather multiple interconnected editing terminals having the same functions. In this configuration, data at a terminal which has just been edited by some operation is forwarded to all other connected terminals for updating. This form of information sharing, however, requires that some sort of data synchronizing method be established since multiple terminals are operating on the same data simultaneously. We therefore adopt a method whereby the system synchronizes the clocks on each terminal at the time of connection and sends an operation time stamp together with edited data. This enables most recently modified data to be identified and all information on all terminals to be updated appropriately. This paper provides an overview of this new collaborative DTPP system and describes the techniques for exchanging edited data and synchronizing data.