• Science of Emotion and Sensibility
• /
• v.10 no.3
• /
• pp.433-441
• /
• 2007

Creativity has very important significance to children. Although active researches and educations on other studies (for instance, mathematics, science, logics, music, etc) are being done, evaluation or development on children's creativity in design is very inadequate. Therefore, this study is a basic research to develop evaluation to judge design creativity of children as an incipient stage of educational method development to develop children's creativity in design. Evaluation categories (originality - novelty/fun, practicality-function/possibility) that can evaluate design creativity of children were drawn out based on documentary records, and as the results or performing experimental research to figure out correlativity between creativity of idea and design creativity targeting children in second grade of elementary school, subordinate provinces of idea's creativity related to design creativity were fluency and elaboration. However, it does not mean that fluency and delicacy are the only subordinate provinces of idea's creativity related to design creativity, but they are more influential compared to other provinces (creativity, abstractness of title, and resistance to premature closure) This study is to prepare basic framework of educational method to improve design creativity education of children, and has its meaning to complement what are lacked in design creativity through the educational method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.539-547
• /
• 2012

Volume survey for earthwork is conducted periodically at every month at large scaled construction sites for request payment for the construction. Currently, the earthwork volume is calculated on the overlapped drawing for two cross sections which were created by new and previous surveying data observed by GPS and TS. However the survey is required lots of time and expenses as it is a pin-point surveying method thus surveyors intend to get data only for the heavy undulated topographic features chosen by himself to save time and expenses. Consequently, it causes poor results due to low dense measurement as well as it's not matched with the results by another surveyors. As a result, the conflicts related in earthwork volume calculation often arises among the owner, contractors and sub contractors. In this study, we developed a method to get surveying data for fast and accurate volume calculation using 3D Mobile Laser System and conducted an application test. Also we carried out experiments for topographic survey using MLS to judge for the application additionally. The results showed that we could reduce a time for cross section survey from 48 hours to 2 hours and collected high dense data which have 0.2m interval instead of 3m interval compare with existing method. Also we could make a map which has high accuracy within 10cm in horizontal through topographic survey using MLS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5534-5540
• /
• 2015

This In the railway signaling system, applications of axle counter in addition to track circuit goes on increasing for detecting train position. Consequently, this paper compares sensor methods of axle counter with between geo-magnetism method and proximity sensor method. And it presents differences and results, to improve reliabilities of train detection and axle counting. Also, this article presents an applied result which is based on field experience, with regard to installation, considering attachment condition of sensor part for accurate axle counting. This study acquires expandability that is able to perform not only axle counting function but also various other functions (direction detection of train, speed detection of train, and so on). It was a result of a change of design in order to judge phase difference of sensors, to improve reliability of axle counting. Furthermore, it does not subordinate to characteristics (type, weight of train). And it is confirmed that the omission of axle counting was not occurred in 350km/h. This was the result of Lab test after the construction of transfer equipment of trial axle and Test Bed for axle counting. Both of them are self-productions. Through this, it prepares foundation which is able to apply not only to train detection but also to speed of passing trains, formation number of trains, detector locking condition - when the train passes the section of switch point, and level crossing devices. Furthermore, it would be judged to contribute safety train operation if proximity sensor method applies to the whole railway signaling system from now on.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1738-1747
• /
• 2010

This report shows the analysis and design of tactical decision automation procedure and the result of core algorithm. Expecially scheme of analysis and design includes result of tactical decision supporting procedure analysis for target engagement to fire in refer to AFATDS. Tactical decision automation procedure has three phases like target analysis, target priority, fire unit decision, fire method and attack method. Target analysis creates base information to decide priorities and attack methods through target activity, size and protection status. Target priority and fire unit decision judge target priority and fire unit with unit status and operation mission basis of target priority. Fire unit and Attack method decide fire style according to the kind of fire and ammunition for effective firing achievement. Finally, we show the effective tactical decision automation procedure through making the algorithm of priority and air control.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.3
• /
• pp.245-258
• /
• 2012

ILM(incremental launching method) is a way of construction, installing a girder producing spot behind the abutment, making the bridge girder infilled with concrete continuously and launching with using by jack. The superstructure of the bridge constructed by this method is temporarily located on the center of the span and the supporting points under construction. Therefore, the sections are structurally undergone maximum positive moment, maximum negative moment, and maximum shear force arising from self weight. On the other hand, launching nose is attached to the front of the girder to decrease the cantilever effect. The magnitude of this temporary stress creating on the upper section is dependent upon the launching nose's characteristics. This study has proposed an analysis formula simplified on the assumption that the launching nose section is a quasi-equivalent section(rigid; equivalent section, weight; tapered section) in order to ensure the accuracy of the analysis formula and improve its usage with reference to the interaction between the launching nose and the upper section; and a prismatic analysis formula modified by displacing a diaphragm's weight by a concentrated load in order to improve the accuracy of the existing analysis formula that assumes the launching nose section as the equivalent section. To judge the accuracy and usage of two analysis formulas proposed, we have compared and analyzed computational structural analysis programs and existing analysis formulas based on actual ILM bridge data. As a result, all of two reveal the superior accuracy and also their usage has been improved by the simplification of analysis formulas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.751-760
• /
• 2018

Currently, the quality measurement of the work is carried out by the supervisor's visual inspection, as the workers individually judge the number of resolutions, thickness, speed and vibration. After work, we are conducting follow-up work through traditional spot test, which is less representative. Therefore, it is impossible to check the results of the resolution, and there is always the possibility that problems will arise due to poor construction. This study demonstrates the feasibility of using the continuous compaction strength measurement method by comparing the continuous compaction strength measurement method and the conventional compaction strength measurement method after performing the compaction in the actual field scale in various test conditions. The validity is verified by analyzing the Compaction Meter Value of an Intelligent Compaction roller composed of a Global Positioning System and an accelerometer, Based on the proven results, a full range of quality can be confirmed without a single test. The quality confirmation is visualized in the compaction control program developed in this study, This enables the field manager to perform real-time quality monitoring at the same time as compaction.

• Korea Trade Review
• /
• v.41 no.2
• /
• pp.231-250
• /
• 2016

The study attempts to consider L/G(Letter of Guarantee) in a different angle, which is internationally used as a way of commercial customs and practices in a case when the consignee wants to receive the goods without the original Bill of Lading, Thus, this study focuses more on verifying the usage of L/G in Mixed Payment System and the range of guarantee responsibility by an issuing bank through case analysis. This case uses a mixed payment method of L/C(Letter of Credit) and T/T(Telegraphic Transfer) in the transaction of goods. The issuing bank of L/C issues L/G with the amount of L/C which is the same as the amount as C/I(Commercial Invoice). However the carrier deliver all goods laden under both L/C and T/T payment with the production of L/G. In this case, because the buyer is unable to pay, the seller makes a claim for damages to the carrier that the carrier delivers the goods to the buyer against L/G. Finally, the judge gives a decision that the issuing bank of L/G should pay the whole amount of the goods. In this case, the main issue of the dispute is the range of guarantee responsibility by the issuing bank of L/G. As a result of the case analysis, the study suggests two counter strategies for smooth utilization in international trade environment. First, in the case of mixed payment system, a seller should issue a commercial invoice separately based on the amount of each settlement plan in order to clarify the liability of guarantee. Second, banks should establish a new form for L/G including a sentence for verifying liabilities of the bank's side in the current form of L/G.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.6
• /
• pp.1099-1110
• /
• 2023

The recognition system of autonomous driving and robot navigation performs vision work such as object recognition, tracking, and lane detection after multi-sensor fusion to improve performance. Currently, research on a deep learning model based on the fusion of a camera and a lidar sensor is being actively conducted. However, deep learning models are vulnerable to adversarial attacks through modulation of input data. Attacks on the existing multi-sensor-based autonomous driving recognition system are focused on inducing obstacle detection by lowering the confidence score of the object recognition model.However, there is a limitation that an attack is possible only in the target model. In the case of attacks on the sensor fusion stage, errors in vision work after fusion can be cascaded, and this risk needs to be considered. In addition, an attack on LIDAR's point cloud data, which is difficult to judge visually, makes it difficult to determine whether it is an attack. In this study, image scaling-based camera-lidar We propose an attack method that reduces the accuracy of LCCNet, a fusion model (camera-LiDAR calibration model). The proposed method is to perform a scaling attack on the point of the input lidar. As a result of conducting an attack performance experiment by size with a scaling algorithm, an average of more than 77% of fusion errors were caused.

• Journal of Venture Innovation
• /
• v.5 no.2
• /
• pp.85-99
• /
• 2022

Dryers becoming commercially available for experimental and industrial use are classified to general drying oven, hot-air dryer, vacuum dryer, freezing dryer, etc. and kinds of them are various from the function, size and volume, etc. But the moisture measurement is not applied although it is important factor for the quality control and the performance improvement of products, and then now is very passive because the weight is weighed arbitrarily after dry-end. Generally the method for measuring moisture is divided by a direct measurement method and a indirect measurement method, and the former such as the change of weight or volume on the front and rear of separation of moisture, etc. is mainly used. Relatively a indirect measurement is very limited to apply due to utilize measurement apparatuses using temperature conductivity and micro-wave etc. In this research, we easily designed the moisture measurement system using the open-source based Arduino, and monitored moisture fluctuations and weight profiles in the real-time without the effect of external environment. Concretely the temperature-humidity and load cell sensors were packaged into a drying oven and the various change values were measured, and their sensors capable to operate 60℃ and 80℃ were selected to suitable for the moisture sensitive materials and the food dry. And also the performance safety using the organic samples of banana, pear, sawdust could be secured because the changes of evaporation rate as the dry time and temperature, and the measurement values of load cell appeared stable response characteristics through repeated experiments. Hereafter we judge that the reliability can be improved increasingly through the expansion of temperature-humidity range and the comparative analysis with CFD(Computational Fluid Dynamics) program.

• Journal of Korean Society of Forest Science
• /
• v.113 no.2
• /
• pp.259-270
• /
• 2024

Since 2013, Korea has allocated significant budgets and manpower nationwide to prevent the spread of pine wilt disease and to reduce damage. As a result, the number of damaged trees decreased from 2.18 million in 2014 to 310,000 in 2021. However, the damage has increased again since then. Despite the overall decrease in the number of damaged trees, the scope of the damage continues to expand every year. Previous studies have develope In order to judge the control performance, a quantitative control performance analysis method to objectively evaluate control performance. This method takes into consideration two factors-quantity change and the change in the damage area, which is an area factor. This approach provides a more comprehensive assessment than the control guidelines that only suggest changes in damage grade based on the volume of damaged trees. The expansion of the damage range is also an important factor in analyzing control performance, but previous studies have not reflected this. Therefore, this study calculates the change in the distance of the pine wilt disease boundary area for Gyeongsangbuk-do, where changes in the damage range can easily be observed from year to year. The study then creates application criteria and coefficients and uses them to improves control performance index calculation formula. As a result, it was possible to calculate a quantitative analysis of the control performance, taking into account the changes in the damage range. When the improved formula was applied to 26 cities, counties, and districts in Gyeongsangbuk-do, it slightly decreased or increased compared to the existing calculation formula. This confirmed that the control performance index can change from a positive value (+), indicating increased damage, to a negative value (-), indicating reduced damage.