• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.83-91
• /
• 2002

A common form of construction for apartment buildings consists of walls and coupling elements. But, the structural behavior of coupling elements are very complex and affected by the properties of coupling elements. The objective of this study is to estimate the behavior of coupling elements in wall-dominant systems. For the purpose of this study, two wall-slab specimens and two wall-beam specimens were tested. The specimens with different reinforcement layouts were subjected to reversed cyclic loading, consistent with coupling action, with increasing imposed inelastic deformations. From the results of this study, 1) in coupling slabs, the stresses were not uniform across the width, 2) the effective width of coupling slabs was found smaller than that of predicted from previous studies, 3) diagonally reinforced coupling beam with slab showed larger ductility and more amount of energy dissipation to be attained compared with conventionally reinforced coupling beam.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.3
• /
• pp.149-151
• /
• 2015

Coupling with a ring of capacitors introduces in-phase coupling current in multi-stage LC oscillators, increasing coupling strength and phase spacing accuracy. Capacitive coupling is effective at high-frequency applications because it increases coupling strength with the operating frequency. However, capacitive loading from the ring lowers operating frequency and reduces the tuning range. Mathematical expressions of phase noise and phase spacing accuracy with capacitive coupling are examined here, and transistor-level simulations confirm the effectiveness of the capacitive coupling.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.857-863
• /
• 2003

In rotating machinery, unbalance and misalignment are major concerns in vibration. Unbalance can be eliminated by balancing procedure to some degree. but little work has been done on the vibrations that occur in a misaligned rotor system. Currently, no generalized theoretical model based on a rotor system with flexible coupling is available to describe the vibrations caused by misalignment. As a part of systematic investigation on the misalignment, first of all, the study on flexible coupling with misalignment should be preceded. In this study, the geometry and reaction force and moment of a gear coupling with misalignment was investigated, also the theoretical model of a gear coupling with misalignment was presented by using the relationship between geometry and moment of gear coupling. It is expected that the proposed procedure can be applied to derive the theoretical model of other couplings.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.43-47
• /
• 2001

Effect of coupling agent on the mechanical properties of PP/GF blend was investigated. The flexural modulus, Izod impact strength, elongation at yield and tensile strength were improved with using coupling agent. Mopological studies revealed that PP and GF were incompatible and addition of coupling agent was very effective to enhance the compatibility, result in mechanical properties.

• The Korean Journal of Applied Statistics
• /
• v.13 no.2
• /
• pp.415-425
• /
• 2000

We proposed a new classification algorithm based on bootstrap sampling and pairwise coupling method. Also, for comparing the accuracy of a proposed algorithm with those of old methods, we conducted classification with waveform data and others.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1566-1571
• /
• 2007

Oligodeoxyribonucleotide bearing the di-acetylenic linkage has been prepared. Staring from 5-Iodo-2'-deoxyuridine(1), a four-step sequence, consisting of the Pd(0)-catalyzed Heck-type C-C coupling with acetylenic group, protection of 5'-hydroxy group, generation of acetylenic hydrogen, and Glaser oxidative coupling reaction leads to the dimeric oligodeoxyribonucleotide(5).

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.1
• /
• pp.41-48
• /
• 1997

Design rules of directional coupler optical switches are discussed in consideration of parasitic couplings in the bending section. The parasitic coupling phenomenon is analyzed based on the coupled-mode theory and the solutions are represented in the form of the transfer matrix. The modified switching conditions due to the parasitic coupling are derived and the resultant switching diagrams are illustrated. It is revealed that the parallel section's length needs to be adjustd less than the coupling length $l_c(=\pi/2\textsc{k}o)$ to obtain the desired crosstalk and that the adjustment depends on the strength of the parasitic coupling. However, it is discovered that, for weak parasitic coupling, the switching voltage does not need to be altered but may maintain the same value as if no parasitic coupling is taken into account.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.4
• /
• pp.87-93
• /
• 1997

An electro-optic polymer digital optical switch with a coupling region modified for optimum mode coupling is proposed, and it is analyzed by using the beam propagation method combined with the effective index method. Its modified coupling region is adiabatically introduced along the propagation direction from the branching point of the two waveguides. The structure of the modified coupling region and its refractive index profiles are designed to optimize the mode coupling in the Y-branch waveguide. Therefor, the switching performance of the device may be enhanced with a fixed device length. It is confirmed from the numerical calculation that the drive voltage is reduced by more than 30 percents and te crosstalk is improved by about 8dB.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.100-107
• /
• 2000

The hydraulic couplings have been widely used in industries, automobile, and power-station drives including ships. A mathematical analysis by which the design and application of hydraulic couplings are made is used in conventional design formulae and general roto-dynamic theories. The fluid flow of hydraulic couplings can be considered to have two component, one circumferentially about the coupling axis, and the other passing fluid from the pump to the turbine in the plane of the coupling axis. Tests have been carried out on the full-scale production coupling. The performance test consists of taking measurement of torque of the fluid coupling for three different amount of working fluid inside with various loads to the output shaft. The purpose of this research is to construct the experimental test equipments and to establish a series of performance test for the domestically developed hydraulic couplings, and to obtain experimental results which can be used to improve the performance of the hydraulic coupling and to solve the practical problems confronted in operation.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.1021-1026
• /
• 2003

Resin impregnation of carbon materials was affected by surface of carbon materials. The surface of carbon materials with coupling treatment improved comparability and wettability with resin, and that increased impregnation efficiency and properties of carbon materials. As a results of FT-IR, The silanol was coated on carbon surface with one layer. Coupling treatment of carbon materials increased impregnation efficiency, which improved porosity, mechanical strength, density and friction behavior.