• Title/Summary/Keyword: joint test

Search Result 3,290, Processing Time 0.029 seconds

Joint stability of internal conical connection abutments with or without hexagon indexes: an in vitro study (내부연결 원추형 임플란트의 육각구조의 유무에 따른 연결부 안정성: 실험적 연구)

  • Lee, Sang-Woon;Cha, Min-Sang;Lee, Ji-Hye;Cho, Lee-Ra;Park, Chan-Jin
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.36 no.2
    • /
    • pp.95-103
    • /
    • 2020
  • Purpose: The purpose of this study was to compare the axial displacement of the hexagonal and conical abutment in internal conical connection implant after screw tightening and cyclic loading. Materials and Methods: Internal conical connection implants were divided into two groups (n = 10): group HEX, hexagonal abutment; and group CON, conical 2-piece abutments. The axial displacement and removal torque values were measured after 30 Ncm torque tightening and 250N loading test of 100,000 cycles. The Student t test with 5% significance level was used to evaluate the data. Results: HEX group demonstrated significantly higher axial displacement values after 30 Ncm tightening in comparison to the CON group (P < 0.05). No significant difference was found in axial displacement after cyclic loading (P = 0.052). Removal torque loss before and after the cyclic loading both revealed no significant difference between groups (P = 0.057 and P = 0.138). Removal torque value decreased after cyclic loading in both groups (P < 0.05). Conclusion: Overall, both abutment with or without hexagon index presented similar biomechanical performance except HEX group demonstrated significantly more axial displacement after applying tightening torque.

The Changes of Isokinetic Strength in Accordance with Short-term Weight loss of Wrestlers (레슬링 선수들의 단기간 체중감량이 슬관절의 등속성 운동능력에 미치는 영향)

  • 염종우
    • Journal of Life Science
    • /
    • v.12 no.6
    • /
    • pp.780-785
    • /
    • 2002
  • The purpose of this study is to investigate isokinetic strength changes of knee joint in accordance with short-term weight loss of wrestlers. For this purpose, 14 male wrestlers of a K technical high school in B city participated in our research. The wrestlers were divided into two groups; one group of the wrestlers didn't lose any weight, and the other lost over 5% of their weights. The isokinetic strength was also observed before and after weight loss. The isokinetic strenght test were processed at test speed of the$60^{\circ}C$/sec, $90^{\circ}C$/sec, and $250^{\circ}C$/sec with the CYBEX NORM system(Cybex 770+TMS, USA). Peak torque, peak torque %BW, total work, total work %BW, and endurance ratio were measured. Results showed that the isokinetic strength after the short-term weight loss of wrestlers decreased meaningfully Although endurance ratio didn't show any meaningful difference in our research, but more accurate research may find out the relationship between short-term weight loss and the endurance ratio of isokinetic strength.

Cyclic Loading Tests of Concrete-Filled Composite Beam-Column Connections with Hybrid Moment Connections (복합모멘트접합을 갖는 콘크리트 충전 보-기둥 합성접합부의 반복하중 실험)

  • Lim, Jong Jin;Kim, Dong Gwan;Lee, Sang Hyun;Lee, Chang Nam;Eom, Tae Sung
    • Journal of Korean Society of Steel Construction
    • /
    • v.28 no.5
    • /
    • pp.345-354
    • /
    • 2016
  • In the present study, hybrid moment connections of welding and bar reinforcement for composite beam-column connections were proposed. Concrete-filled octagonal tube and U-section were used for the column and beam, respectively. In the beam-column connection, the top flange and web of the beam U-section were connected to the column plate by welding. However, to reduce stress concentration at the weld joints, the bottom flange of the beam was not welded to the column plate. Instead, to transfer the tension force of the beam flange, reinforcing bars passing through the column plate were used. Four exterior connections with conventional welded and hybrid moment connections were tested under cyclic loading and their cyclic behaviors were investigated. The test results showed that the hybrid moment connections successfully transferred the beam moment to the column. The strength and ductility of the hybrid moment connections were comparable to the conventional welded moment connection with exterior diaphragm; however, the connection performance was significantly affected by the details of the hybrid moment connection.

Analysis on the Effect of Oral habits and Stress on Temporomandibular disorder in High school students (고등학생의 구강 악습관과 스트레스가 턱관절 장애에 미치는 영향 분석)

  • Lee, Ga-Ryoung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.11
    • /
    • pp.193-200
    • /
    • 2020
  • This study used a structured questionnaire to analyze the effects of oral habits and stress on temporomandibular disorders in high school students. A total of 339 students attending high schools in Ulsan agreed to participate in the study. Data was analyzed using the SPSS Statistics ver. 18.0 for Windows program, t-test, one-way ANOVA, correlation, and regression analysis. Our results reveal that the temporomandibular disorder index is statistically correlated with the oral habit index, school life stress index, family life stress index, interpersonal stress index, and egosphere stress index (p≤0.01). The oral habit index had maximum influence on the temporomandibular disorder index. Moreover, higher the stress level in egosphere stress, greater significant differences were observed in the temporomandibular disorder index (p≤0.01). In other words, persistence of oral habits and non-addressal of stress increased the likelihood of experiencing temporomandibular disorders in adulthood. This was determined by the regression formula Y (temporomandibular disorder index) = 2.563 + 0.550X1 (oral habit index) + 0.134X2 (egosphere stress index). Thus, bad oral habits and stress in adolescence can be the potential cause of jaw joint disorders in adulthood. We believe that measures are needed to actively recognize and improve oral habits, and properly cope with stress during adolescence.

Experimental Study on the Slip Coefficient with Member Type and Dimensions of High Tension Bolt Hole (부재 및 고장력볼트 구멍치수에 따른 미끄러짐계수의 실험적 연구)

  • Yang, Seung-Hyun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.9
    • /
    • pp.4277-4283
    • /
    • 2012
  • Slip coefficient, whose value is dependent on the condition of contact surface at the friction joint of high tension bolt, is determined by slip load. Because contact area affects slip load, contact area that varies with bolt hole size is also related to the slip coefficient. In this study, we manufactured 32 specimens and performed bending and tension tests in order to examine changes in slip coefficient and load with material type, bolt diameter, and size of bolt hole. Slip load of specimens with oversize bolt hole had strength that was more than 80% higher than the slip load of specimens with standard bolt hole, and it also exceeded the design slip strength. In addition, we observed significant correlation between net-section ratio and slip ratio of specimens with oversize and standard bolt hole. However, some differences between the specimens are thought to have been caused by reduction in initial axial force of high tension bolt, which is an important parameter of slip coefficient. It is self-evident that increased bolt hole size would lead to decrease in design strength as it reduces both slip coefficient and bolt axial force. Nevertheless, we suggest that some flexibility in regulation of bolt hole, as long as it does not threaten the structural stability, may be a positive factor in terms of workability and efficiency.

Estimating the Value of Statistical Life by Analysing Disease Protective Behavior: Focusing on Medical Examination of Cancer (질병예방행위 분석을 통한 확률적 인간생명가치 추정: 암 검진 행위 분석을 중심으로)

  • Shin, YoungChul
    • Environmental and Resource Economics Review
    • /
    • v.17 no.4
    • /
    • pp.845-873
    • /
    • 2008
  • This study estimates the VSL(value of a statistical life) as well as the WTP(willingness to pay) for mortality risk reduction using sample selection model with data on liver cancer examination which is associated with little possibility of multi-purpose(i.e. joint production) in averting behavior. The marginal benefits of mortality risk reduction are estimated by applying for household production function model with medical expense and the time required for medical examination of liver cancer. Individuals are more likely to take liver cancer test if they are male, older, higher educated, those with spouse, smoker, more income of household, and more anxious about their health. The costs of liver cancer examination are statistically significantly affected with expected signs by size of mortality risk reduction, sex, period of eduction, those with spouse, and household income. The marginal effect of mortality risk reduction owing to taking liver cancer examination is estimated at 321,097 won. The costs of liver cancer examination are increased by 905 won with more one year of education period and by 1,743 won with more one million won in household income. On liver cancer examination, male spends more 12,310 won than female and those with spouse pay more 7,969 won than those without spouse. Therefore the VSL from mortality risk reduction due to liver cancer examination is 321.10 million won at mean size of mortality risk reduction and mean cost of liver cancer examination. The results of sensitivity tests on costs and effects of liver cancer test shows that the VSLs are estimated in a range from 160.55 million won to 642.19 million won.

  • PDF

Analysis on the Assist Characteristics for the Knee Extension Motion of Lower Limb Orthosis Using Muscular Stiffness Force Feedback (근육 강성도 힘 피드백을 이용한 하지 보조기의 무릎 신전 운동 보조 특성 분석)

  • Kim, K.;Kang, S.R.;Jeong, G.Y.;Joo, S.J.;Kim, N.G.;Kwon, T.K.
    • Journal of Biomedical Engineering Research
    • /
    • v.31 no.3
    • /
    • pp.217-226
    • /
    • 2010
  • The lower limb orthosis with a pneumatic rubber actuator, which is intended for the assistance and the enhancement of muscular activities of lower limbs was developed in this study. Compared to other knee extension assistive devices being developed by other researchers, our device is designed especially for the elderly people and intended only for slight assistance so that the subjects can keep their muscular strength. For the effectiveness of system, muscular activities of major muscles in lower limbs during sit-to-stand (STS) and squat motion were measured and analyzed. Subjects were performed the STS and squat motion with and without lower limb orthosis. We made comparison muscular activities between with and without lower limb orthosis. Lower limb orthosis was controlled using muscular stiffness force feedback that is controlled by muscular activities of the measured muscle from force sensor. For analysis of muscular activities, electromyography of the subjects was measured during STS and squat motion, and these were measured using MP 150(BIOPAC Systems, Inc.). Muscles of interest were rectus femoris(RF), vastus lateralis(VL), vastus medialis(VM) and vastus intermedius(VI) muscles in lower limbs of the right side. A biodex dynamometer was used to measure the maximal concentric isokinetic strength of the knee extensors of wearing and not wearing orthosis on right side. The test were performed using the concentric isokinetic mode of test with the velocity set at 60°/s for muscles around the knee joints. The experimental result showed that muscular activities in lower limbs wearing orthosis using muscular stiffness force of a vastus medialis muscle was reduced and knee extension torque of an knee joint wearing lower limb orthosis was increased. With this, we confirmed the effectiveness of the developed lower limb orthosis.

The Effects of Wearing Roller Shoes on Muscle Activity in The Lower Extremity During Walking (롤러신발과 일반신발의 착용 후 보행 시 하지근의 근전도 비교)

  • Chae, Woen-Sik;Lim, Young-Tae;Lee, Min-Hyung;Kim, Jung-Ja;Kim, Youn-Joung;Jang, Jae-Ik;Park, Woen-Kyoon;Jin, Jae-Hong
    • Korean Journal of Applied Biomechanics
    • /
    • v.16 no.3
    • /
    • pp.137-148
    • /
    • 2006
  • The purpose of this study was to compare muscle activity in the lower extremity during walking wearing jogging and roller shoes. Twelve male middle school students (age: 15.0 yrs, height 173.7 cm, weight 587.7 N) who have no known musculoskeletal disorders were recruited as the subjects. Seven pairs of surface electrodes (QEMG8, Laxtha Korea, gain = 1,000, input impedance >$1012{\Omega}$, CMMR >100 dB) were attached to the right-hand side of the body to monitor the rectus femoris (RF), vastus medialis (VM), vastus lateralis (VL), biceps femoris (BF), tibialis anterior (TA), and medial (GM) and lateral gastrocnemius (GL) while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and EMG recordings. EMG data were filtered using a 10 Hz to 350 Hz Butterworth band-passdigital filter and further normalized to the respective maximum voluntary isometric contraction EMG levels. For each trial being analyzed, five critical instants and four phases were identified from the recording. Averaged IEMG and peak IEMG were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p<.05). The VM, TA, BF, and GM activities during the initial double limb stance and the initial single limb stance reduced significantly when going from jogging shoe to roller shoe condition. The decrease in EMG levels in those muscles indicated that the subjects locked the ankle and knee joints in an awkward fashion to compensate for the imbalance. Muscle activity in the GM for the roller shoe condition was significantly greater than the corresponding value for the jogging shoe condition during the terminal double limb stance and the terminal single limb stance. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the GM activity for the roller shoe condition increased. It seems that there are differences in muscle activity between roller shoe and jogging shoe conditions. The differences in EMG pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine joint kinematics during walking with roller shoes.

Prediction of Lung Cancer Based on Serum Biomarkers by Gene Expression Programming Methods

  • Yu, Zhuang;Chen, Xiao-Zheng;Cui, Lian-Hua;Si, Hong-Zong;Lu, Hai-Jiao;Liu, Shi-Hai
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.15 no.21
    • /
    • pp.9367-9373
    • /
    • 2014
  • In diagnosis of lung cancer, rapid distinction between small cell lung cancer (SCLC) and non-small cell lung cancer (NSCLC) tumors is very important. Serum markers, including lactate dehydrogenase (LDH), C-reactive protein (CRP), carcino-embryonic antigen (CEA), neurone specific enolase (NSE) and Cyfra21-1, are reported to reflect lung cancer characteristics. In this study classification of lung tumors was made based on biomarkers (measured in 120 NSCLC and 60 SCLC patients) by setting up optimal biomarker joint models with a powerful computerized tool - gene expression programming (GEP). GEP is a learning algorithm that combines the advantages of genetic programming (GP) and genetic algorithms (GA). It specifically focuses on relationships between variables in sets of data and then builds models to explain these relationships, and has been successfully used in formula finding and function mining. As a basis for defining a GEP environment for SCLC and NSCLC prediction, three explicit predictive models were constructed. CEA and NSE are requentlyused lung cancer markers in clinical trials, CRP, LDH and Cyfra21-1 have significant meaning in lung cancer, basis on CEA and NSE we set up three GEP models-GEP 1(CEA, NSE, Cyfra21-1), GEP2 (CEA, NSE, LDH), GEP3 (CEA, NSE, CRP). The best classification result of GEP gained when CEA, NSE and Cyfra21-1 were combined: 128 of 135 subjects in the training set and 40 of 45 subjects in the test set were classified correctly, the accuracy rate is 94.8% in training set; on collection of samples for testing, the accuracy rate is 88.9%. With GEP2, the accuracy was significantly decreased by 1.5% and 6.6% in training set and test set, in GEP3 was 0.82% and 4.45% respectively. Serum Cyfra21-1 is a useful and sensitive serum biomarker in discriminating between NSCLC and SCLC. GEP modeling is a promising and excellent tool in diagnosis of lung cancer.

Cognition of registered nurse on emergency treatment for oral and maxillofacial injury in Jeju province (제주 지역 간호사의 구강 악안면 영역 손상에 대한 응급 처치 인식도)

  • Lee, Byoung-Jin;Song, Hyo-Jeong;Lim, Gil-Chai;Kahm, Se-Hoon;Kim, Sung-Joon
    • The Journal of the Korean dental association
    • /
    • v.50 no.12
    • /
    • pp.763-770
    • /
    • 2012
  • The purposes of this work were to assess the cognition of the registered nurse(RN) on oral and maxillofacial emergency treatment and to compare cognition of the RN with that of the 119 emergency medical technician(EMT). 450 RNs who were working at each of secondary hospitals in Jeju province had responded to the questionnaire. Independent sample t-test and chi-square test were used to assess the state of RN on dental emergency treatment and to compare RN with EMT. The question 'education time on dentistry in formal education' that marked '0 hour' and '1-3 hours' were 73.3% and 20.0%, respectively. The question 'refresher training class on dentistry' that marked '0 hour' and '1-3 hours' were 92.9% and 6.7%, aggregately 99.6%. The results showed low score in the question 'reduction of temporo-mandibular joint(TMJ)'($1.67{\pm}0.857$), 'fixation of dislocated TMJ'($1.70{\pm}0.853$) and 'post-avulsed tooth treatment'($1.78{\pm}0.774$) by 5-point Likert scale. Likewise, the scores were $2.02{\pm}0.806$ in the question 'treatment of maxillofacial trauma', $2.76{\pm}1.061$ in the question 'emergent care of avulsed tooth', $2.70{\pm}1.095$ in the question 'treatment time of avulsed tooth' and $2.79{\pm}1.056$ in the question 'mouth guard', respectively. Compared to EMT, results of RN showed a statistically lower figure(p<0.05) in all items compared except the question 'medicine control', and the question 'doctor care in emergency room' was borderline(p=0.069). From this study, it is necessary for RN and student of nursing science to be educated on the oral and maxillofacial emergency treatment for the initial management of injuries. Authors suggest further co-study and nation-wide research with nursing care.