• Geotechnical Engineering
• /
• v.13 no.6
• /
• pp.147-164
• /
• 1997

This study has the assumption that scale effects in rock mass properties are atrributed to the discontinuous and inhomogeneous nature of rock masses. In order to escape the general equivalent material approach applied to the concept of representative volume element, this study presents the new method considering irregular i oink geometry and arbitrary numbers of i oink and arbitrary joint orientations. Based on the theoretical approach, this theory is applied to a real engineering project. Showing the property variations with size of rock mass element, various numerical experiments about scale effect are conducted. Particularly, to prove the adequacy of the verification process in scale effect with nomerical method, and to investigate the detailed source of scale effect, 4 models with increas ins number of joints are tested. On the basis of the experimental results, the test results of scale effects in 3-D rock mass are presented. From these experiments the effects of the mechanical properties of rock joints on the scale effects in rock mass strength and elastic constants are discussed. To verify the mechanism of scale effects in jointed rock mass, two models with different j oink geometries are studied.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.341-351
• /
• 1991

The purpose of this study was to aid in the evaluation of prognosis of temporomandibular joint after open reduction of fractured mandible. The author studied the bony changes (remodelling) of 116 temporomandibular joints and facial asymmetry in 58 patients. Subjects were divided into 4 Groups according to the follow up periods after open reduction of fractured mandible. The bony changes and facial asymmetry were observed on lateral tomograms and cephalometric posteroanterior skull radiograms. The results were as follows: 1. The bony changes of condyles were observed in 56 cases (38 flattening, 14 osteophyte, 3 erosion, 1 sclerosis). Flattening was observed in 32.8% (Group Ⅰ 27.8%, Group Ⅱ 37.5%, Group Ⅲ 35.7%, Group Ⅳ 32.1%). Osteophyte was observed in 12.1% (Group Ⅰ 11.1%, Group Ⅱ 8.3%, Group Ⅲ 7.1%, Group Ⅳ 21.4%). Erosion and sclerosis were observed in 2.6%, 0.9%, respectively. 2. The bony changes of articular fossa were observed in 18 cases (15.5%). Flattening was observed in 12.1% (Group Ⅰ 2.8%, Group Ⅱ 4.2%, Group Ⅲ 10.7%, Group Ⅳ 17.9%). Sclerosis was observed in 3.4% (Group Ⅰ 5.6%, Group Ⅲ 3.6%, Group Ⅳ 3.6%). 3. The amount of facial asymmetry was 2.81±2.20㎜ (Group Ⅰ 3.06±1.93㎜, Group Ⅱ 2.38±2.44㎜, Group Ⅲ 2.74±1.19㎜, Group Ⅳ 2.93±2.93㎜). There was no significant difference between all groups according to bony changes of temporomandibular joints after open reduction of fractured mandibles (x²-Test, P>0.05).

• Journal of Welding and Joining
• /
• v.26 no.1
• /
• pp.63-68
• /
• 2008

This paper has aimed to prevent excessive heat input by controlling arc distribution and heat input capacity with pulse GTAW in order to improve weld quality in 0.08mm pressure gauge diaphragm and flange welding parts. A design of experiment was designed using Box-Behnken method to optimize a welding process. The pulse GTAW parameters such as pulse current, base current, pulse duty, frequency and welding speed were set to input variables while hydraulic pressure that represents welding characteristics in diaphragm and flange joint were set to output variables. Based on the test result, a second regression equation was obtained between input and output variables and turned out significant. Besides, an influence of parameters has been confirmed through response surface analysis using the second-order regression equation and optimum welding condition was obtained through a grid-search method. The optimum welding condition was set to pulse current 84.4(A), base current 29.6(A), pulse duty 58.8(%), frequency 10(%), and welding speed 596(mm/min). Then, decent bead shape was acquired with no excessive heat input under the $2.3kgf/cm^2$ of hydrostatic pressure.

• Journal of Biomedical Engineering Research
• /
• v.33 no.2
• /
• pp.98-103
• /
• 2012

The purpose of this study was to compare premotor time(PMT) and electro-mechanical delay(EMD) between sitting and standing posture. Twenty four healthy young subjects(12 women and 12 men) participated in this study. Subjects were instructed to perform maximal, voluntary, isometric contraction of ankle muscle(tibialis anterior and gastrocnemius muscles) in reaction to auditory stimulus. PMT and EMD, calculated from stimulus, EMG and torque profile were compared between sitting and standing postures. As statistical analysis, paired t-test was performed to assess difference between sitting and standing posture. In both tibialis anterior and gastrocnemius muscles, EMD was found to be significantly longer for standing than sitting. However, PMT in standing posture was longer than that in sitting posture only in gastrocnemius muscles. These result indicate that increased reaction time, particularly, increased EMD of ankle muscles in standing posture may be caused by co-contraction of ankle muscles for postural control in standing posture.

• Korean Journal of Human Ecology
• /
• v.21 no.3
• /
• pp.551-565
• /
• 2012

The primary goal of this study was to provide a systematic methodology of utilizing 3D technology for tight-fit performance sportswear using information of skin deformation in various posture. Technical tools used in this study are Cyberware whole body scanner, RapidForm2004, 2C-AN 3D pattern development program, and YukaCAD. Analysis of the 3D skin deformation while knee joint was bent from $0^{\circ}$ to $60^{\circ}$ revealed that the length of dermatomes L4 was remained consistent during knee bending. Therefore, L4 was chosen as a major cutting line. To develop a highly ergonomic pattern, replicas of static and dynamic postures were developed and integrated using two methods, one is morphing method (Sqirlz Morph), and the other is AutoCAD. Experimental tight-fit garments called 'Derm-Mov Pattern' was designed using dematomes L4, L2, and inner line under knee and compared with four other patterns. As results, AutoCAD was appropriate as a integrating method of various postures. In wear test, 'Derm-Mov Pattern' was rated high (p < .001), in terms of pressure comfort especially around front crotch area. However, wear sensation was not signipicantly different in other area due to highly extensible property of materials. Pressure distribution was relatively even in these experimental garments.

• Physical Therapy Korea
• /
• v.5 no.4
• /
• pp.41-51
• /
• 1998

The right hip abductor musculature has been reported to demonstrate "stretch weakness" attributable to chronic elongation imposed by standing posture common to right-handed healthy persons. Kendall and associates have described the concept of "stretch weakness",. The purpose of this study was to assess isometric hip abduction torque and surface electromyographic activity (using MYOMED 432) in a sample of 40 healthy right-handed persons (20 male, 20 female), all of whom agreed to participate in the study, and compare side difference in the hip abductor musculature. In order to assure the statistical significance of the results, the paired t test was applied at the .05 level of significance. The results were as follows: 1) The difference in apparent leg length of right and left legs was significant at the .05 level. 2) There was a significant difference between right and left pelvic height (standing position) at the 05 level measurements, and scapula height at the .05 level. 3) Power measurements and action potentials of right hip abductor were greater than the left hip abductor regardless of the range of joint motion (inner range, outer range) 4) The difference in muscle power and action potentials according to inner or outer range of both hip abductor were significant at the .05 level. 5) In supine during active left hip abduction, the appearance of action potentials in the right hip abductors is indicative of contra-lateral effect (p<.05) These results suggest: In healthy right-handed persons, the apparent leg length on the right is longer than on the left, and pelvic height is elevated on the right side. Muscle those and muscle action potentials of the right hip abductor are higher than those of the left hip abductor in the lengthened position. Therefore, the results in this study are contrary to Kendall's. This type of study should be carried out in many physical therapy departments.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.945-951
• /
• 2013

This study evaluated the fatigue strength of the bogie frame of an urban maglev train through fatigue analysis, cumulative damage, and fatigue tests based on a proposed fatigue evaluation method. The results of FEM analysis in which various load combinations were adopted showed that all data were under the fatigue limit of a butt welded joint made of A6005 in a Goodman diagram. The cumulative fatigue damage was calculated at the highest level from a bolt connecting the area of the electromagnetic pole in the casting block; however, the total sum was evaluated as D=0.808 based on $1{\times}10^7$ cycles, which indicates that it did not exceed the failure criteria. In addition, the results of the fatigue testshowed that there was no crack at any position in the bogie frame, which corresponded to the results of fatigue analyses.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.4
• /
• pp.47-55
• /
• 2010

In general, ground surface strengthening such as using geotextile is needed to secure trafficability of construction equipment. There are many researches for mechanical beha-vior of very soft ground covered with geotextile, however, most of them are under the condition to fix geotextile completely. In this study, numerical analyses were carried out to figure out the effects of restricting conditions of geotextile on bearing mechanism of very soft ground covered with geotextile. In numerical analyses, joint elements were used to figure out the friction properties between ground and geotextile. The results of numerical analyses were compared with the results of model test. In conclusion, the effects of restricting conditions of geotextile on bearing mechanism of very soft ground covered with geotextile became clear.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.1
• /
• pp.99-108
• /
• 2012

In this paper, fatigue tests are conducted for the specimens with longitudinal and transverse attachment under variable amplitude axial loading based on storm model. Considered loadings include repeated single storm, 6 or 8 storms randomly, and storms including calm sea condition while the mean stress and the maximum stress of loadings are changed. The effect of three variables are investigated; root mean square(RMS) value of stress amplitude, mean stress shift and maximum stress, which can characterize storm loading on fatigue life. In addition, experiments including calm sea loading are also carried out to investigate the effect of calm sea state. Test results are evaluated and compared with DNV-CN2005 and Matsuoka's method for the estimation of crack initiation and propagation life. To verify the validity of the criteria, the measured crack initiation lifes are compared with the specific crack length 15mm, which are calculated with beach marks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1186-1195
• /
• 2013

In modern warfare, the main factor of triumph is superior situation awareness which leads rapid command decision and precisely guided munition, and TDL(Tactical Data Link) is the main communicational enabler. ROK forces currently operate Link-16 with allied forces and are also developing Korean national data link, Link-K which is also planned to be cooperated with Link-16. Assigning participant and track numbers needs agreement between ROK and allied forces, but ROK forces have exclusive authority in assigning numbers in Link-K. This paper proposes the effective method of exchange participant and track numbers between Link-16 and Link-K, and applicability verification in operational test and evaluation will be also presented.