• Journal of the Korea Computer Industry Society
• /
• v.7 no.3
• /
• pp.263-270
• /
• 2006

Magnetic nerve stimulation treatment is much backward real condition than other field. Specially, successful medical treatment introduction of magnetic field (MF) can was refered long ago in Avicenna's work, and is thought as age of medicine magnetology development recently. These development is achieved through biologist and biophysicist and clinician's joint effort, but, new mountings and relationship air tassel are developed steadily. Magnetic nerve stimulation treatment field designs treatment system by each function during long wave high-amplitude (traditional magneto therapy of greatly great that strong that) short time that CMF, VMF, PMF field etc. are representative but are HPMT technology in this research and manufacture and special quality did comparative analysis.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.1 s.18
• /
• pp.1-9
• /
• 2003

This study intends to select the planning techniques and develop the layouts of environmentally friendly rural villages. As the results of this study, the planning techniques of rural villages are as follows: (1) Development of agricultural technology(organic farming), (2) Environmentally friendly layout considering natural energy, conservation of natural landscape and ecosystem, and sewage and rainwater, (3) Community restoration considering joint work, economic interchange between urban people and rural residents, and unity of rural resident's opinion, and (4) Activation of rural tourism considering satisfaction of tourists, conservation of ecological and cultural resources, and resident's income increasement. According to these 4 techniques, this study also developed 4 general models: (1) land-use and flow, (2) green and blue networks, (3) networks of ecological and cultural resources, and (4) finally residential model, divided rural villages into 2 types. Therefore when we develop a countryside, we can apply to these models, considering the current ecological and cultural resources conditions.

• Nuclear Engineering and Technology
• /
• v.30 no.3
• /
• pp.262-272
• /
• 1998

The experiences and causes of pressure tube cracking accidents in the CANDU reactors and the development of the fuel channel at AECL(Atomic Energy Canada Limited) have been described. Most of the accidents were caused by Delayed Hydride Cracking(DHC). In the cases of the Pickering units 3&4 and the Bruce unit 2, excessive residual stresses induced by an improper rolled joint process played a role in DHC. In the Pickering unit 2, cracks formed by contact between the pressure and calandria tubes due to the movement of the garter spring were the direct cause of the failure. To extend the life of a fuel channel, several R&D programs examining each component of the fuel channel have been carried out in Canada. For a pressure tube, the main concern is focused on changing the fabrication processes, e.g., increasing cold working rate, conducting intermediate annealing and adding a third element like Fe, V, and Cr to the tube material. In addition to them, chromium plating on the end fitting and increasing wall thickness at both ends of the calandria tube are considered. There has also been much interest in the improvement of fuel channel performance in our country and several development programs are currently under way.

• Nuclear Engineering and Technology
• /
• v.40 no.3
• /
• pp.183-190
• /
• 2008

Pyroprocessing is the optimal means of treating spent metal fuels from metal fast fuel reactors and is proposed as a potential option for GNEP in order to meet the requirements of the next generation fuel cycle. Currently, efforts for research and development are being made not only in the U.S., but also in Asian countries. Electrorefining, cathode processing by distillation, injection casting for fuel fabrication, and waste treatment must be verified by the use of genuine materials, and the engineering scale model of each device must be developed for commercial deployment. Pyroprocessing can be effectively extended to treat oxide fuels by applying an electrochemical reduction, for which various kinds of oxides are examined. A typical morphology change was observed following the electrochemical reduction, while the product composition was estimated through the process flow diagram. The products include much stronger radiation emitter than pure typical LWR Pu or weapon-grade Pu. Nevertheless, institutional measures are unavoidable to ensure proliferation-proof plant operations. The safeguard concept of a pyroprocessing plant was compared with that of a PUREX plant. The pyroprocessing is better adapted for a collocation system positioned with some reactors and a single processing facility rather than for a centralized reprocessing unit with a large scale throughput.

• Journal of Plant Biotechnology
• /
• v.5 no.2
• /
• pp.69-77
• /
• 2003

The ornamental industry encompasses cut flower, pot plant, turfgrass and nursery stock production and is an important part of the agricultural sector. As internationally traded commodities, cut flowers and plants are an integral part of the economy of a number of developing countries in South America, the Caribbean and Africa. Genetic modification (GM) is a tool with great potential to the ornamental horticulture industry. The rapid progress in our knowledge of plant molecular biology can accelerate the breeding ornamental plants using recombinant DNA technology techniques. Not only is there the possibility of creating new, novel products the driver of the industry but also the potential to develop varieties requiring less chemical and energy inputs. As an important non-food agricultural sector the use of genetically modified (GM) ornamental crops may also be ideal for the intensive farming necessary to generate pharmaceuticals and other useful products in GM plants. To date, there are only a few ornamental GM products in development and only one, a carnation genetically modified for flower colour, in the marketplace. International Flower Developments, a joint venture between Florigene Ltd. in Australia and Suntory Ltd. of Japan, developed the GM carnations. These flowers are currently on sale in USA, Japan and Australia. The research, development and commercialization of these products are summarized. The long term prospects for ornamental GM products, like food crops, will be determined by the regulatory environment, and the acceptance of GM products in the marketplace. These critical factors will be analysed in the context of the current legislative environment, and likely public and industry opinion towards ornamental genetically modified organisms (GMO's).

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2003.04a
• /
• pp.39-48
• /
• 2003

The ornamental industry encompasses cut flower, pot plant, turfgrass and nursery stock production and is an important part of the agricultural sector. As internationally traded commodities, cut flowers and plants are an integral part of the economy of a number of developing countries in South America, the Caribbean and Africa. Genetic modification (GM) is a tool with great potential to the ornamental horticulture industry. The rapid progress in our knowledge of plant molecular biology can accelerate the breeding ornamental plants using recombinant DNA technology techniques. Not only is there the possibility of creating new, novel products the driver of the industry but also the potential to develop varieties requiring less chemical and energy inputs. As an important non-food agricultural sector the use of genetically modified (GM) ornamental crops may also be ideal for the intensive farming necessary to generate pharmaceuticals and other useful products in GM plants. To date, there are only a few ornamental GM products in development and only one, a carnation genetically modified for flower colour, in the marketplace. International Flower Developments, a joint venture between Florigene Ltd. in Australia and Suntory Ltd.of Japan, developed the GM carnations. These flowers are currently on sale in USA, Japan and Australia. The research, development and commercialisation of these products are summarised. The long term prospects for ornamental GM products, like food crops, will be determined by the regulatory environment, and the acceptance of GM products in the marketplace. These critical factors will be analysed in the context of the current legislative environment, and likely public and industry opinion towards ornamental genetically modified organisms (GMO's).

• Composites Research
• /
• v.29 no.3
• /
• pp.117-124
• /
• 2016

The failure strength of composite single-lap joint repaired using scarf patch was investigated by test and finite element method. A total of 45 specimens were tested changing scarf ratio, stacking pattern, and defect size to study the failure strength and mode. Except for one case, all repaired specimens showed the equal or higher strength than the sound specimens and the effect of considered repair parameters was not remarkable. It was found through the failure mode inspection that the surface treatment for bonding was not enough in the case which failed at the lower load than the sound specimen. Three-dimensional finite element analysis was conducted to verify the test results. It was confirmed that the considered repair parameters do not significantly affect the stress distribution of the specimens. It was also observed that the applied tensile load is relieved passing through the overlapped region thickness of which is almost double. From this study, it is concluded that if the bonding procedure for adherends and patch including surface treatment for fabric layer is thoroughly followed, the strength of repaired single-lap joint can be restored up to the strength of sound one.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.1
• /
• pp.236-264
• /
• 2018

This study investigates the trend of the patent applications and the future direction of ICT in Gyeongbuk Province by employing patent portfolio analysis, one of the methodology of map analyses for industry-related ICT issues. Thus, this study aims to investigate the ICT development trend based on ICT patent information in Gyeongbuk Province. The promising technologies in ICT industry are extracted by applying patent portfolio analysis, one of the patent map analyses. The analysis results can be applied to the establishment of research and development strategies. This study extracts ICT trend by applying International Patent Classification to the patents registered in Gyeongbuk. For promising technologies, this study analyzed the patents based on the ICT Classification Code. Based on the analysis results, this study presents the trend of patent application, technology share, patent activity status, the trend of patent application by each technology according to ICT classification, the growth stages of ICT market, registration parties for patents, joint researches of research parties, and primary parties of patent applications. After drawing promising technologies, this study provides the future progress direction of ICT industry in Gyeongbuk Province. The research results also can be applied to securing technology competence and developing strategy of technology policy.

• The Journal of Society for e-Business Studies
• /
• v.25 no.2
• /
• pp.127-146
• /
• 2020

Overseas advanced countries are aware of the importance of research equipment and are providing a lot of policy support to revitalize the research equipment industry. However, Korea does not have any law to support policies or related projects to revitalize the research equipment industry. Therefore, there is an urgent need for legislation to support policies and projects for revitalizing research equipment industry. It is considered necessary to establish a separate special law for revitalizing the research equipment industry so that it can gain competitiveness in the global market of the research equipment industry. As we have seen, the necessary articles in the relevant laws should be specified so that various promotion policies can be developed to foster the research equipment industry. In order to promote the development of research equipment industry, there are three essential items to be specified in the law. First is research and development support, second is infrastructure development, and third is business incubation. The following contents should be included in each contents. First of all, "research and development support" includes research and envelopment project promotion and support policy items, research equipment development trends and investment trends, joint research between industry, academia, And research and development support for fusion, hybrid and commercialization. Next, the items to be included in "infrastructure development" should include the establishment of research equipment clusters, related support items, training of professional manpower, and research equipment development base area and institutions. Finally, the items that should be included in "business incubation." include support matters for the development of excellent companies (priority purchase system, etc.), matters related to technology transfer and marketing, matters concerning the protection of intellectual property, And matters for promoting overseas expansion.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.2
• /
• pp.281-292
• /
• 2017

It is demanded to promote research and development of cyber weapons system and core technology in response to the ongoing cyber attack of North Korea. In this paper, core technologies of the future cyber weapon system are developed and the factors affecting the realization timing of core technologies were analyzed. 9 core technology groups and 36 core technologies are derived. Afterwards, these core technology groups are compared to the operation phase of the joint cyber warfare guideline and the cyber kill chain of Lockheed Martin. As a result of the comparison, it is confirmed that the core technology groups cover all phases of the aforementioned tactics. The results of regression analyses performed on the degree of influence by each factor regarding the moment of core technology realization show that the moment of core technology realization approaches more quickly as factors such as technology level of the most advanced country, technology level of South Korea, technology transfer possibility from the military sector to the non-military sector(spin-off factor), and technology transfer possibility from the non-military sector to the military sector(spin-on factor) increase. On the contrary, the moment of core technology realization is delayed as the degree at which the advanced countries keep their core technologies from transferring decrease. The results also confirm that the moment of core technology realization is not significantly correlated to the economic ripple effect factor. This study is meaningful in that it extract core technologies of cyber weapon system in accordance with revision of force development directive and join cyber warfare guideline, which incorporated cyber weapon system into formal weapon system. Furthermore, the study is significant because it indicates the influential factor of the moment of core technology realization.