• Strategy21
• /
• s.39
• /
• pp.5-46
• /
• 2016

North Korea's 4th nuclear test on Jan. 6 and following developments once again awakened the world into seriousness of the nuclear matters on the Korean peninsula. On March 2, UNSC adopted Resolution 2270 which is complemented by Seoul government's measures such as withdrawal from the Gaesung Industrial Complex (Feb. 9) and announcement of unilateral sanction (March 8). Seoul government also strongly urged the international community to strangle North Korea's 'financial resources.' The U.S., Japan, China, and other countries have issued unilateral sanctions to complement the UNSC measure. South Korea and the U.S. conducted their annual joint military drill (Resolve-Foal Eagle) in the largest-ever scale. North Korea, however, responded with demonstration of its nuclear capabilities and announcement of de facto 'nuclear-first' politics. North Korea test-fired a variety of delivery vehicles, threatened nuclear strikes against South Korea and the U.S., and declared itself as an 'invincible nuclear power armed with hydrogen bombs' at the 7th Workers 'Party Congress held in May, 2016. Considering the circumstantial evidences, the North's 4th nuclear test may have been a successful boosted fission bomb test. North Korea, and, if allowed to go on with its nuclear programs, will become a nuclear power armed with more than 50 nuclear weapons including hydrogen bombs. The North is already conducting nuclear blackmail strategy towards South Korea, and must be developing 'nuclear use' strategies. Accordingly, the most pressing challenge for the international community is to bring the North to 'real dialogue for denuclearization through powerful and consistent sanctions. Of course, China's cooperation is the key to success. In this situation, South Korea has urgent challenges on diplomacy and security fronts. A diplomatic challenge is how to lead China, which had shown dual attitudes between 'pressure and connivance' towards the North's nuclear matters pursuant to its military relations with the U.S, to participate in the sanctions consistently. A military one is how to offset the 'nuclear shadow effects' engendered by the North's nuclear blackmail and prevent its purposeful and non-purposeful use of nuclear weapons. Though South Korea's Ministry of Defense is currently spending a large portion of defense finance on preemption (kill-chain) and missile defense, they pose 'high cost and low efficiency' problems. For a 'low cost and high efficiency' of deterrence, South Korea needs to switch to a 'retaliation-centered' deterrence strategy. Though South Korea's response to the North's nuclear threat can theoretically be boiled down into dialogue, sanction and deterrence, now is the time to concentrate on strong sanction and determined deterrence since they are an inevitable mandatory course to destroy the North' nuclear-first delusion and bring it to a 'real denuclearization dialogue.'

• Strategy21
• /
• s.30
• /
• pp.143-176
• /
• 2012

We are witnessing the growing maritime tension on the East Asian sea these days. Each naval powers in the region are competing each other to acquire more advanced naval capabilities. Based upon the rapid economic development, China is actively beefing up its naval capabilities and expand its boundary of naval activities all over the East Asian region. Chinese Navy already unveiled its expansive naval strategy replacing the traditional concept of 'Near-Sea Defense' with the new concept of 'Far-Sea Defense' strategy. In response to potential rival's naval build up, the U.S. is redeploying its naval forces focusing on the Asia-Pacific region. The U.S. enhances its joint naval exercises with the countries in the region, such as Japan, India, Australia and so on. In addition, Washington is devising new naval strategy under the concept of 'Air-Sea Battle' to deter Peking's so-called 'Anti-Access/ Area Denial(A2AD)' strategy. As a close ally of the U.S., Japan also disclosed its clear intention to strengthen the Maritime Self Defense Force(MSDF)'s capabilities by introducing the new concept of 'Dynamic Defense Force' in 2011. Under the new concept, JMSDF is pursuing the additional acquisition of submarines, quasi-aircraft carriers, Aegis-equipped destroyers, etc. Under the new president's strong leadership, Russia is also invigorating the naval build-up. Especially, Russia is fortifying the Pacific Fleet's naval assets by deploying new-type of naval ships such as the Mistral which was imported from France. In the midst of competitive naval build-up among the major naval powers in the region, we are observing the growing maritime conflicts on the East China Sea as well as South China Sea. Those naval conflicts can pose severe threats to our national interests. Maritime conflicts on the East or South China Sea can imperil our sea lanes which will be indispensible for national economic development. Neighboring countries' maritime conflicts also will cast an uncertainty on the path to mobilize international cooperation to resolve the North Korean issues. We should contribute to ease the maritime tension in the region by various ways. First, we should actively galvanize the bilateral maritime dialogue among the major naval powers in the region. Second, we also should take the lead to form a multilateral maritime cooperation mechanism in the region. Above all, we should set the aim to be a peaceful maritime power who can contribute to a building of stable maritime order in the region with a considerable naval power.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2018

In this paper, we present a robust beamforming design to tackle the weighted sum-rate maximization (WSRM) problem in a multicell multiple-input multiple-output (MIMO) - non-orthogonal multipleaccess (NOMA) downlink system for 5G wireless communications. This work consider the imperfectchannel state information (CSI) at the base station (BS) by adding uncertainties to channel estimation matrices as the worst-case model i.e., singular value uncertainty model (SVUM). With this observation, the WSRM problem is formulated subject to the transmit power constraints at the BS. The objective problem is known as on-deterministic polynomial (NP) problem which is difficult to solve. We propose an robust beam forming design which establishes on majorization minimization (MM) technique to find the optimal transmit beam forming matrix, as well as efficiently solve the objective problem. In addition, we also propose a joint user clustering and power allocation (JUCPA) algorithm in which the best user pair is selected as a cluster to attain a higher sum-rate. Extensive numerical results are provided to show that the proposed robust beamforming design together with the proposed JUCPA algorithm significantly increases the performance in term of sum-rate as compared with the existing NOMA schemes and the conventional orthogonal multiple access (OMA) scheme.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.617-624
• /
• 2015

This paper describes the development of a wearable robot to assist the elbow muscle for use by elderly workers in aging societies. Various previously developed wearable robots have drawbacks in terms of their price, portability, and slow recognition of the wearer's intention. In this paper, emphasis is placed on the following features to minimize these drawbacks. The first feature is that an actuator is attached only at the elbow joint that withstands the highest moment during arm motion to reduce the weight, volume, and price of the robot and increase its practicality. The second is that operation of the wearable robot is divided into two modes, a tracking mode and a muscle strengthening mode, and the robot can automatically switch between these modes by analyzing the wearer's intention through the brachial muscle strength measuring device developed in this study. The assistive performance of the developed wearable robot is experimentally verified by motion tracking experiments without an external load and muscle strengthening experiments with an external load. During the muscle strengthening experiments, the power of the muscle of the upper arm is measured by a commercial electromyography (EMG) sensor. Motion tracking performance at a speed of $120^{\circ}/s$ and muscle assistance of over 60 % were obtained using our robot.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.62-62
• /
• 2009

석탄화력발전소의 CO2배출량 감소와 고효율, 대용량화로 인해 초초임계압(USC:Ultra Super Critical) 화력발전소의 건설이 증가하고 있다. USC 발전소는 효율향상을 위한 증기온도와 압력의 상승 때문에 보일러 고온고압부에 기존의 소재에 비해 고온강도와 내산화성의 재료물성이 향상된 신소재 적용이 불가피하다. 특히 사용된 신소재 중에서 보일러 본체를 구성하는 수냉벽관(Water wall), 과열기와, 재열기용 튜브 및 후육부인 헤더와 배관재로 기존의 2.25Cr-1Mo강을 개량한 2.25Cr-1.6W계 내열강이 적용되고 있다. 2.25Cr-1.6W강은 SMI와 MHI가 공동개발한 소재로 1995년 튜브제품이, 1999년에 단조, 파이프재, 플레이트제품이 ASME code case로 등재되었고, 2009년 ASME code case 2199-4로 개정되어 사용 중이다. 이 소재는 2.25Cr-1Mo강에 고온강도 개선을 위해 석출강화효과가 있는 V과 Nb을 첨가하였고, 탄화물의 열적안정성과 고용강화효과 증대를 위해 W을 첨가하였다. 그리고 제작성과 용접성 및 재료의 인성 향상을 위해 B첨가와 C함량을 낮추었다. 합금성분의 첨가와 조정에 의해 고온강도는 개선되었지만, 보일러 설치 및 보수를 위한 용접과정에서 용접금속과 CGHAZ(Coarse Grain HAZ)에서 용접균열이 발생하였다. 대부분의 용접균열은 용접결함이나 고온 혹은 저온균열이 아닌 2.25Cr-1.6W계강의 강도 개선을 위해 첨가한 V과 Nb이 용접후열처리 도중 입내에 MX형태의 미세석출로 입내를 강화시킴으로서 발생한 재열균열 민감성 증대에 기인된 것으로 판단된다. 이에 본 연구에서 용접 및 후열처리 과정에서 용접금속과 HAZ에서 발생하는 용접금속의 응력분포를 전산해석을 통해 확인하고 실제 후육파이프 용접부에서 잔류응력을 측정해 비교하였다. 용접부 응력분포는 SYSWELD 프로그램을 사용해 해석을 수행하였고, 발전소 실배관재의 용접부 응력측정은 수평부 측정이 용이하도록 지그를 부착한 Potable 잔류응력측정기를 사용해 Hole Drilling Method(HDM)를 적용하여 잔류응력을 측정하였다. 해석 결과 CGHAZ부위의 잔류응력이 용접금속과 기타 부위에 비해 높은 응력분포를 나타냈으며, 이는 CGHAZ와 용접용융선 부근에서 균열이 발생하는 실제값과 일치하는 결과를 보였다. 실제 배관재 용접부에서 측정한 잔류응력값은 항복응력의 약 50% 이하 응력값을 나타냈다. 배관 구조에 기인한 시스템응력의 영향을 제거하기 위해 배관재 용접부를 중심으로 양끝단을 절단 후 용접부에서 측정한 응력은 항복응력 대비 25%수준의 낮은값을 보였다. 그러나 배관재가 장기간 고온환경에 노출되었고 용접금속 내부의 균열이 발생한 상태에서 측정하였기 때문에 용접잔류응력은 상당부분 해소되어 상대적으로 낮은 응력값이 얻어진 것으로 판단된다.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.100-100
• /
• 2009

This paper is concerned with numerical analyses of residual stresses in welds and material's susceptibility to stress corrosion cracking (SCC) for the primary piping system in nuclear power plants: Both the dissimilar metal weld (DMW) for stainless steel to low alloy steel joints and the similar metal weld (SMW) for forged stainless steel to cast stainless steel joints are considered. Thermal elasto-plastic analyses using the finite element method (FEM) are performed to predict residual stresses generated in fabrication welding and its related processes for both the DMW and SMW, including effects of quenching for cast stainless steel piping, machining of the DMW root, and grinding of the SMW root. As a result, the effect of quenching should be included in the evaluation of residual stresses in the SMW for the cast stainless steel piping. It is deemed that residual stresses in both the DMW and SMW would not affect the SCC susceptibility of the welds providing that the welding processes are completed without any weld repair on the inside wall of the joint. However, the grinding process if performed on the safe-end to piping weld, would produce a high level of residual stresses in the inner surface region and thus a stress improvement process (e.g. buffing) should be considered to reduce susceptibilities to SCC.

• Korean journal of communication and information
• /
• v.66
• /
• pp.242-272
• /
• 2014

This study examines why follow-up investigative programs about the sinking of the Cheonan Patrol Combat Corvette(ROKS Cheonan) have not been produced, despite much speculation surrounding the cause of the sinking since November 2010, when KBS investigative program, In-Depth 60 Minutes which had covered the incident was aired. We have uncovered four reasons through a series of in-depth interviews with producers and reporters, as follows. First, Korean military authorities monopolized relevant information, while the producers could not prove or confirm the validity of the findings of the JIG(Joint Civilian-Military Investigation Group)'s report because the facts had been revealed partially and selectively by the authorities and the press' scientific investigation were rejected by the authorities. Second, the crew of In-Depth 60 Minutes was subjected to severe disciplinary action by the Korea Communications Commission. This caused a chilling effect, - it broke the producers' resolve to further explore the reason behind the sinking. Furthermore, the screening of the investigative documentary, Project Cheonan Ship was cancelled without prior notice, presumably by the power of the State and markets. Third, the reorganization and shake-up of personnel by broadcasting stations' presidents appointed by the power of the State crushed the spirit of PD Journalism. Finally, the "red purge" factions stigmatized by the political or military, or the mainstream press, caused the producers or broadcasters to engage in self-censorship. The idea has been used in Korea as a smoke screen to deflect public attention. Nevertheless, the producers hope to shed light on the Cheonan sinking incident and to prove reasonable doubts by pursuing follow-up investigations.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.155-165
• /
• 2010

The purpose of this study was to analyze kinematic quantitative factors required of a forehand counter drive in table tennis through 3-D analysis. Four national table tennis players participated in this study. The mean of elapsed time for total drive motion was $1.009{\pm}0.23\;s$. At the phase of impact B1 was the fastest as 0.075 s. This may affect efficiency in the initial velocity and spin of the ball by making a powerful counter drive. The pattern of center of mass showed that it moved back and returned to where it was then moved forward. At the back swing, lower stance made wide base of support and a stronger and safer stance. It may help increasing the ball spin. Angle of the elbow was extended up to $110.75{\pm}1.25^{\circ}$ at the back swing and the angle decreased by $93.75{\pm}3.51^{\circ}$ at impact. Decreased rotation range of swinging arm increased linear velocity of racket-head and impulse on the ball. Eventually it led more spin to the ball and maximized the ball speed. Angle of knee joint decreased from ready position to back swing, then increased from the moment of the impact and decreased at the follow thorough. The velocity of racket-head was the fastest at impact of phase 2. Horizontal velocity was $7796.5{\pm}362\;mm/s$ and vertical velocity was $4589.4{\pm}298.4\;mm/s$ at the moment. It may help increase the speed and spin of the ball in a moment. The means of each ground reaction force result showed maximum at the back swing(E2) except A2. Vertical ground reaction force means suggest that all males and females showed maximum vertical power(E2), The maximum power of means was $499.7{\pm}38.8\;N$ for male players and $519.5{\pm}136.7\;N$ for female players.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.3
• /
• pp.209-217
• /
• 2019

EMP (Electromagnetic Pulse) usually means High Power Electromagnetic Wave (HPEM). In the case of the shielding plate against the EMP, there is a possibility of deterioration of the electromagnetic wave shielding performance due to the skill of the constructor, bad construction, deformation of the shielding plate at the connection portion (joint portion). The inefficient use of space due to the separation distance is also pointed out as a problem. Therefore, this study aims to derive the optimum electromagnetic shielding condition by applying ATMSM to concrete as a part of securing electromagnetic wave shielding performance with reflection loss against concrete wall. Experimental parameters included concrete wall thickness and application of Zn-Al ATMSM. For the concrete wall, the wall thickness was 100 to 300mm, which is generally applied, and experimental parameters were set for the application of Zn-Al metal spraying method to evaluate electromagnetic shielding performance. Experimental results showed that as the thickness increases, the electromagnetic shielding performance increases due to the increase of absorption loss. In addition, after the application of Zn-Al ATMSM, the average shielding performance increased by 56.68 dB on average, which is considered to be increased by the reflection loss of the ATMSM. In addition, it is considered that the shielding performance will be better than that when the conductive mixed material and the ATMSM are simultaneously applied.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.542-547
• /
• 2021

Glass lined impellers are corrosion resistant to most chemicals, including strong acids, and also have a smooth, non-stick surface, easy to clean and free from impurities in the process. Glass lined home base impeller is a multi-purpose impeller designed to stir a wide viscosity range of liquids from low viscosity fluids to high viscosity fluids, among others, cell culture, yeast culture, and beer fermentation pots, especially used for air-water system breathable stirring. The glass lining for HB impellers, which are simple in structure and competitive in performance, is essential to have upper and lower division in order to make the joint area between the impeller and shaft as small as possible. The upper and lower division of the impeller hardly affects the mixing performance, but the aeration performance. In this study, in order to optimize the shape of the Glass Lining HB impeller, a study was conducted on the effect of the angle between the upper and lower impellers, the clearance between the impellers, and the number of baffles on the aeration power. The optimal shape and baffle plate conditions for the Glass lined HB impeller were derived through the study results that the angle and the clearance between the upper and lower impellers decreased the ration of the power consumption with aeration P_g and that without aeration P₀, P_g/P₀.