• Computers and Concrete
• /
• 제20권1호
• /
• pp.11-22
• /
• 2017

There are two methods to model the plastification of members comprising lumped and distributed plasticity. When a reinforced concrete member experiences inelastic deformations, cracks tend to spread from the joint interface resulting in a curvature distribution; therefore, the lumped plasticity methods assuming plasticity is concentrated at a zero-length plastic hinge section at the ends of the elements, cannot model the actual behavior of reinforced concrete members. Some spread plasticity models including uniform, linear and recently power have been developed to take extended inelastic zone into account. In the aforementioned models, the extended inelastic zones in proximity of critical sections assumed close to connections are considered. Although the mentioned assumption is proper for the buildings simply imposed lateral loads, it is not appropriate for the gravity load effects. The gravity load effects can influence the inelastic zones in structural elements; therefore, the plasticity models presenting the flexibility distribution along the member merely based on lateral loads apart from the gravity load effects can bring about incorrect stiffness matrix for structure. In this study, the linear flexibility distribution model is improved to account for the distributed plasticity of members subjected to both gravity and lateral load effects. To do so, a new model in which, each member is taken as one structural element into account is proposed. Some numerical examples from previous studies are assessed and outcomes confirm the accuracy of proposed model. Also comparing the results of the proposed model with other spread plasticity models illustrates glaring error produced due to neglecting the gravity load effects.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권9호
• /
• pp.229-239
• /
• 2020

This paper examines the impact of gender on access to debt finance among Vietnamese enterprises. The paper investigates data and variables retrieved from the World Bank Enterprise Survey dataset using five Probit models. The regression results suggest that there exist more unfavourable debt financing conditions for women-led firms (WLF), measured as a lower probability of having loan applications fully approved. Firm's age, working sector, and perception of access to finance as a difficulty are found to have explanatory power on the discrimination. More importantly, the perception of debt finance as a difficulty or firms' level of confidence significantly explains the variance of the dependent variable of probability of loan approval, or gender effect would be more pronounced if the firm already has a low level of confidence. The paper also contributes in testing for the gender effect on Vietnamese enterprises from different sectors and scale, unlike other prior research papers focusing on specific sectors and/or small and medium enterprises only. The findings are highly useful for Vietnamese credit institutions to set out a specific business policy to attract more WLFs and help promoting gender equality in the working environment, especially in debt financing, which is often neglected in existing regulation and policy frameworks.

• Strategy21
• /
• 통권36호
• /
• pp.94-120
• /
• 2015

The Asia-Pacific Region has emerged as a arena of geopolitical competition between the U.S. and China. The Obama administration of the U.S. had laid out the concept of rebalancing strategy toward the region, concentrating its 60 percent of Naval Forces to the region till 2020 and consolidating its network of allies and partners. Whereas Chinese leader Xi Jinping also put forward the concept of new type of major power relations concerning its relations with the U.S. and a concept of 'the Asian Community of Common Destiny' aiming at a more intensified mutual relation among countries in the region. In doing so, Asia-Pacific region gradually became the arena where mutual competition and cooperation between the U.S. and China has crossfired. As a close ally to the U.S. and a partner to Japan, South Korea should develop trilateral naval cooperation by holding joint naval drill with the aim of humanitarian support and disaster relief. At the same time, Seoul also should make efforts to proceed mutual confidence building with Beijing by deepening military-to-military cooperation. These policy options will be helpful to enhance Seoul's security posture in the region.

• Journal of information and communication convergence engineering
• /
• 제8권6호
• /
• pp.655-659
• /
• 2010

In the conventional PNC scheme, the relay node requires simultaneous transmission of two source nodes with strict power control and carrier-phase matching between two received symbols. However, this pre-equalization process at source nodes is not practical in fading channels. In this letter, we propose a novel physical-layer network coding (PNC) scheme with log-likelihood ratio (LLR) conversion for fading channels, which utilizes not pre-equalizer at transmitters (source nodes) but joint detector at receiver (relay node). The proposed PNC requires only channel side information at the receiver (CSIR), which is far more practical assumption in fading channels. In addition, the proposed PNC scheme can use the conventional modulation scheme like M-QAM regardless of modulation order, while the conventional PNC scheme requires reconfiguration of modulation scheme at the source nodes for detection of the received signal at relay node. We consider the combination of the proposed PNC and channel coding, and find that the proposed PNC scheme is easily combined the linear channel codes such as turbo codes, LDPC, and convolutional codes.

• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.305-310
• /
• 2001

UBM-coated Si-wafer was fluxlessly soldered with glass substrate in $N_2$ atmosphere using plasma cleaning method. The bulk Sn-37wt.%Pb solder was rolled to the sheet of $100\mu\textrm{m}$ thickness in order to bond a solder disk by fluxless 1st reflow process. The oxide layer on the solder surface was analysed by AES(Auger Electron Spectroscopy). Through rolling, the oxide layer on the solder surface became thin, and it was possible to bond a solder disk on the Si-wafer with fluxless process in $N_2$ gas. The Si-wafer with a solder disk was plasma-cleaned in order to remove oxide layer formed during 1st reflow and soldered to glass by 2nd reflow process without flux in $N_2$ atmosphere. The thickness of oxide layer decreased with increasing plasma power and cleaning time. The optimum plasma cleaning condition for soldering was 500W 12min. The joint was sound and the thicknesses of intermetallic compounds were less than $1\mu\textrm{m}$.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.438-444
• /
• 2013

This paper presents the replication of a desired vibration response by iterative learning control (ILC) system for a vibration motion replication actuator. The vibration motion replication actuator has parameter uncertainties including system nonlinearity and joint nonlinearity. Vehicle manufacturers worldwide are increasingly relying on road simulation facilities that put simulated loads and stresses on vehicles and subassemblies in order to reduce development time. Road simulation algorithm is the key point of developing road simulation system. With the rapid progress of digital signal processing technology, more complex control algorithms including iterative learning control can be utilized. In this paper, ILC algorithm was utilized to produce simultaneously the six channels of desired responses using the Stewart platform composed of six linear electro-magnetic actuators with Halbach magnet array. The convergence rate and accuracy showed reasonable results to meet the requirement. It shows that the algorithm is acceptable to replicate multi-channel vibration responses.

• Journal of Welding and Joining
• /
• 제26권6호
• /
• pp.54-58
• /
• 2008

Laser welding with AZ61 filler wire was carried out to improve formability though reduction of porosity and formation of under fill bead. Optimum welding condition and mechanical properties of butt joint for $400{\times}500{\times}1.3mm$ magnesium sheets were studied. Optimal welding conditions of laser power, welding speed, and defocusing length are 1000W, 3m/min, and 2mm, respectively. Results of tensile test indicated that both tensile strength and elongation of specimens welded with filler wire were improved at room temperature because of reduction of porosity and under-filled bead formation in addition to the precipitation hardening and microstructure refinement by Al-Mn and Mg-Al-Zn precipitates. At elevated temperature of $200{\sim}350^{\circ}C$, fracture location of tensile specimen was shifted from weld metal to base metal, indicating less softening of weld metal than base metal.

• Wind and Structures
• /
• 제31권3호
• /
• pp.217-227
• /
• 2020

Based on translation models, both Gaussian and non-Gaussian wind fields are generated using spectral representation method for investigating the influence of non-Gaussian characteristics and directivity effect of wind load on fatigue damage of wind turbine. Using the blade aerodynamic model and multi-body dynamics, dynamic responses are calculated. Using linear damage accumulation theory and linear crack propagation theory, crack initiation life and crack propagation life are discussed with consideration of the joint probability density distribution of the wind direction and mean wind speed in detail. The result shows that non-Gaussian characteristics of wind load have less influence on fatigue life of wind turbine in the area with smaller annual mean wind speeds. Whereas, the influence becomes significant with the increase of the annual mean wind speed. When the annual mean wind speeds are 7 m/s and 9 m/s at hub height of 90 m, the crack initiation lives under softening non-Gaussian wind decrease by 10% compared with Gaussian wind fields or at higher hub height. The study indicates that the consideration of the influence of softening non-Gaussian characteristics of wind inflows can significantly decrease the fatigue life, and, if neglected, it can result in non-conservative fatigue life estimates for the areas with higher annual mean wind speeds.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4180-4196
• /
• 2017

In this paper, we analyze average capacity of an amplify-and-forward (AF) cooperative communication system model in multi-relay multiuser networks. In contrast to conventional cooperative networks, relays in the considered network have no embedded energy supply. They need to rely on the energy harvested from the signals broadcasted by the source for their cooperative information transmission. Based on this structure, a two-step selection scheme is proposed considering both channel state information (CSI) and battery status of relays. Assuming each relay has infinite or finite energy storage for accumulating the energy, we use the infinite or finite Markov chain to capture the evolution of relay batteries and certain simplified assumptions to reduce computational complexity of the Markov chain analysis. The approximate closed-form expressions for the average capacity of the proposed scheme are derived. All theoretical results are validated by numerical simulations. The impacts of the system parameters, such as relay or user number, energy harvesting threshold and battery size, on the capacity performance are extensively investigated. Results show that although the performance of our scheme is inferior to the optimal joint selection scheme, it is still a practical scheme because its complexity is much lower than that of the optimal scheme.

• 방송공학회논문지
• /
• 제19권1호
• /
• pp.24-30
• /
• 2014

이 연구는 모바일 기기를 이용한 실시간 동영상 개인 방송 서비스에서 동영상 압축 계산의 부담을 클라우드 컴퓨팅에 오프로딩하는 효과에 대한 연구이다. 모바일 기기에 비해 클라우드는 컴퓨팅 자원과 전력 자원이 매우 풍부하다. 모바일 기기에서의 계산을 줄임으로써 전력사용을 줄일 수 있으나, 압축효율이 떨어져서 전송해야할 데이터양은 늘어난다. 본 연구에서는 전력 절약과 전송 데이터 양 증가의 트레이드오프 분석을 통하여 LTE 통신환경에 따라 오프로딩되는 계산량을 제어하여 최적의 운용조건을 찾을 수 있음을 보인다.