• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.36 no.2
• /
• pp.50-60
• /
• 2024

To promote the application of reliability-based design within the Korean coastal engineering community, the author conducted reliability analyses and optimized the design of a vertical-type breakwater, considering multiple limit states in the seas off of Pusan and Gunsan - two representative ports in Korea. In this process, rather than relying on design waves of a specific return period, the author intentionally avoided such constraints. Instead, the author characterized the uncertainties associated with wave force, lift force, and overturning moment - key factors significantly influencing the integrity of a vertical-type breakwater. This characterization was achieved by employing a probabilistic model derived from the frequency analysis results of long-term in-situ wave data. The limit state of the vertical-type breakwater encompassed sliding, overturning, and collapse failure, with the close interrelation between wave force, lift force, and moment described using the Nataf joint probability distribution. Simulation results indicate, as expected, that considering only sliding failure underestimates the failure probability. Furthermore, it was shown that the failure probability of vertical-type breakwaters cannot be consistently secured using design waves with a specific return period. In contrast, breakwaters optimally designed to meet the reliability index requirement of 𝛽-3.5 to 4 consistently achieve a consistent failure probability across all sea areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3340-3353
• /
• 2009

This paper aims to study the effect of academia-industrial cooperation on the technical innovation of small and medium-sized companies. A survey was conducted on about 1,100 businesses located in the Sihwa-Banwol industrial estate to analyze the consequence of three factors of academia-industrial cooperation. the joint use of equipments, technological support of universities to businesses, and cooperative technological development through technical guidance-on entrepreneurial capability and their knowledge-absorption ability, and ultimately on their technological innovation,. The validity of the survey result was tested through the Structural Equation Model. On the basis of the comparison between companies which have participated in academy-industry cooperation and companies which have not, this paper suggests that venture businesses should take advantage of the cooperation with universities to boost their competitiveness. The analysis of the three individual factors of the academy-industry cooperation based on the Structural Equation Model shows that all of them have remarkable influence on entrepreneurial capability, but that they don't have as much impact on businesses' knowledge absorption ability. However, the outcome of technological innovation of businesses is primarily influenced by entrepreneurial capability rather than their knowledge absorption ability. The survey also shows that the three factors of the cooperation have an equal impact on the competitiveness of companies regardless of their business type or their products' growth stages. As the companies involved in academy industry cooperation outweigh other businesses, in terms of technological innovation, the numbers of new product development, and the numbers of their process improvement cases, this paper argues that new strategies should be taken for the businesses to fully take advantage of academy-industry cooperation.

• Journal of Life Science
• /
• v.27 no.10
• /
• pp.1207-1214
• /
• 2017

Schisandrae Fructus (SF), the fruit of Schisandra chinensis (Turcz.) Baill., is widely used in traditional medicine for the treatment of a number of chronic diseases. SF extracts have been recently reported to attenuate the inflammatory responses in SW1353 human chondrocyte cells in in vitro and monosodium iodoacetate (MIA)-induced cartilage degradation in in vivo osteoarthritis (OA) models. However, their protective and therapeutic potentials against OA in primary culture chondrocytes and animal models remain unclear. Therefore, we investigated the effects of the ethanol extract of SF on the activity of matrix metalloproteinases (MMPs), biomarkers for diagnosis of OA, on interleukin $(IL)-1{\beta}-induced$ primary cultured rat cartilage chondrocytes and MIA-induced osteoarthritis in a rat model. Our data indicated that SF treatment significantly reduced the mRNA expression and enzyme activity of MMP-1, -3 and -13 in $IL-1{\beta}-induced$ primary cultured rat cartilage chondrocytes. The chondro-protective effects of SF were then analyzed in a rat OA model using a single intra-articular injection of MIA in the right knee joint. According to our results, the elevated levels of MMP-1 and -3 were markedly ameliorated by SF administration. Collectively, these findings indicate that SF could be a candidate for the treatment of OA.

• Korean Journal of Weed Science
• /
• v.12 no.2
• /
• pp.144-157
• /
• 1992

The study was conducted to compare the interprete methods and examine the feasibility of mixture use of oxyfluorfen and bensulfuron in controlling principal Paddy weeds, annuals and perennials. Application ratio of both chemicals were obtained from the combinations of 5 levels(0, 5, 10, 15, 20 g ai/ha) of each chemicals, respectively. All the treatments were applied at 5 days after transplanting and water was maintained at 3.0cm in depth. Shoot fresh-weight of weeds was assessed at 35 days after treatments. Data obtained was analysed by Colby, Isobole, Calculus, Regression and EQM method, respectively. The results from the analysis of variance on the principal weeds treated with oxyfluorfen and bensulfuron showed significant interactions at 1% level on both Echinochloa crus-galli and Eleocharis Kuroguwai, and total species at 0.5% level on both Potamogeton distinctus and Cyperus serotinus, but non significant on Scirpus juncoides and Sagittaria pygmaea. Thereafter, the results of the models applied to Echinochloa crus-galli, Eleocharis kuroguwai and total species were as follows ; 1. The Colby method gave values nearly identical to regression estimate method (both multiplicative models) as provided by Akobundu et al. The Colby method and Regression method indicated synergistic toward Echinochloa curs-galli, and total species, but antagonistic toward Eleocharis kuroguwai. 2. The Isobole method shows synergism on Echinochloa crus-galli at $ID_{50}$, and total species at $ID_{60}$ on Eleochari kuroguwai. 3. The Calculus method gave positive signs for the first differentiation and negative signs for the second differentiation except for some rates on Echinochloa crus-galli and total species, but reverse on Eleocharis kuroguwai. These result does not agree with the observed values. 4. ${\theta}$ value from the EQM method was greater than one at all combinations. This result was quite different from those of other methods. 5. The various models did not show the same results, but mixture of oxyfluorfen and bensulfuron tend to have synergistic effect. Weeding effect also was high. Treatment in terms of two chemical combination was expected to reduce rates, and to enhence weeding efficacy compared with single treatment.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.159-177
• /
• 2002

The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle and the angular velocity of the air born phase and understand the control mechanism of the high-bar movement, the somersault, the double somersault, the double somersault with full twist. For this study seven well trained university gymnastic volunteered, Zatsiorky and Seluyanov(1983, 1985)'s sixteen segment system anatomical model was used for this study. For the movement analysis three dimensional cinematographical method(Arial Performance Analysis System : APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 5.1 graphical profromming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and angular velocity were defined. As a result of this study 1. As the rotation of the body increased in the air born phase the projection angle of the CM of the total increased, this resulted the increased of the max hight of the CM. 2. In three dimensional angular velocity the Z axis(vertical direction) projection angular velocity increased as the rotation of the body increased in the airborn phase, but the Y axis and the X axis projection angular velocity did not show significant differences. 3. As the rotation of the body increased in the air born phase the angular movement of the shoulder and the hip showed significant change. These movement act as the starter in the preparation phase. 4. The somersault angle, the twist angle, the tilt angle of the upper body related to the global reference frame in the releas phase the average somersault angle of the three types of high-bar movement was $57.7^{\circ}$, $38.8^{\circ}$, $39.7^{\circ}$, the average tilt angle was $-1.5^{\circ}$, $-5.4^{\circ}$, $-8.4^{\circ}$, the average twist angle was $13.4^{\circ}$, $10.6^{\circ}$, $23.3^{\circ}$. This result showed that the somersault with full twist had the largest movement.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.98-107
• /
• 2006

Magnetization Transfer (MT) imaging generates contrast dependent on the phenomenon of magnetization exchange between free water proton and restricted proton in macromolecules. In biological materials in knee, MT or cross-relaxation is commonly modeled using two spin pools identified by their different T2 relaxation times. Two models for cross-relaxation emphasize the role of proton chemical exchange between protons of water and exchangeable protons on macromolecules, as well as through dipole-dipole interaction between the water and macromolecule protons. The most essential tool in medical image manipulation is the ability to adjust the contrast and intensity. Thus, it is desirable to adjust the contrast and intensity of an image interactively in the real time. The proton density (PD) and T2-weighted SE MR images allow the depiction of knee structures and can demonstrate defects and gross morphologic changes. The PD- and T2-weighted images also show the cartilage internal pathology due to the more intermediate signal of the knee joint in these sequences. Suppression of fat extends the dynamic range of tissue contrast, removes chemical shift artifacts, and decreases motion-related ghost artifacts. Like fat saturation, phase sensitive methods are also based on the difference in precession frequencies of water and fat. In this study, phase sensitive methods look at the phase difference that is accumulated in time as a result of Larmor frequency differences rather than using this difference directly. Although how MT work was given with clinical evidence that leads to quantitative model for MT in tissues, the mathematical formalism used to describe the MT effect applies to explaining to evaluate knee disorder, such as anterior cruciate ligament (ACL) tear and meniscal tear. Calculation of the effect of the effect of the MT saturation is given in the magnetization transfer ratio (MTR) which is a quantitative measure of the relative decrease in signal intensity due to the MT pulse.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.709-734
• /
• 2001

The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

• The Journal of the Korean bone and joint tumor society
• /
• v.11 no.1
• /
• pp.46-53
• /
• 2005

Purpose: Bisphosphonates (BPs) are the analogues of endogenous pyrophosphates: they have been used in the treatment of skeletal diseases such as Paget's disease, osteoporosis, and tumorinducing ostelysis, and are used in treatment of osteolytic metastasis of breast cancer recently. They are also used as one of the therapeutic agents for metastasis of prostatic cancer of which metastasis makes the mixed nature of osteolysis and ostegenesis. Although the action mechanism of BPs are well known for diseases with excessive osteoclastic bone resorption, the direct effect of BPs has not been known yet. This study was intended to see the tumor suppression capability of Zoledronic acid(ZOL) using nude mouse with osteosarcoma. Materials and Methods: MG-63 and HOS osteosarcoma cell lines were used and the transforemed MG-63-GFP and HOS-GFP cells, which were made for detection under fluorescent light, were subcutaneously injected to make osteosarcoma. The five 6-week male mice were used for the experiment at each group. After the injection, mice were cultivated until tumor pieces grow up to $3{\times}3{\times}3$ $mm^3$ and ZOL of 120 ug/kg was subcutaneously injected twice a week. Sizes of tumor were measured twice a week and photographed under fluorescent light. Results: In in vivo test with HOS osteosarcoma cell lines, mean size of tumors was 2,520 $mm^3$ in control group and was 131 $mm^3$ in ZOL group, which showed 94% of reduction comparing with the control ; with MG-63 osteosarcoma cell lines, mean size of tumors was 2,866 $mm^3$ in control group and was 209 $mm^3$ in test group with 72% of reduction (p<0.05). Conclusion: In in vivo tests with nude mice, we suggest that ZOL has direct effect on osteosarcoma cells and it would be used as one of the therapeutic agents for osteosarcoma, especially to ZOL-sensitive osteosarcoma cells.

• Journal of Veterinary Clinics
• /
• v.26 no.2
• /
• pp.144-149
• /
• 2009

Chondrocytes and synovial fluid derived markers are used to monitor for osteoarthritis(OA). Specific inhibitors, known as tissue inhibitors of metalloproteinases(TIMP), regulate the proteolytic activity of matrix metalloproteinases(MMP). This study investigated whether MMP and TIMP levels were altered in synovial fluid and cartilage following the experimental induction of OA in canines. Twenty mature beagle dogs underwent a unilateral surgical transection of the cranial cruciate ligament and the medial collateral ligament as well as a medial meniscectomy. Matrix metalloproteinase-2 and MMP-9 levels were assayed using Western blot and TIMP-2 levels were measured with enzyme-linked immunosorbent assays four weeks after OA induction. Increased MMP-2 expression was observed in chondrocytes isolated from cartilage following OA induction, but MMP-9 expression decreased. Matrix metalloproteinase-2 and MMP-9 levels in synovial fluid from the OA induced joint significantly increased compared to those of the sham group. Tissue inhibitors of metalloproteinase-2 concentrations were higher in chondrocytes from the OA cartilage, yet TIMP-2 remained lower in the synovial fluid of OA. This suggests the elevated release of MMP-9 over MMP-2 into the synovial fluid following the cartilage degradation-related death of chondrocytes after OA. Osteoarthritis can be further deteriorated by increased MMP activity in the synovial fluid because TIMP-2 exist low concentration into the extracellular matrix. As a result, MMP activity, particularly MMP-9 activity, can be useful as a biomarker in diagnosing and monitoring the early stages of canine OA.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.1
• /
• pp.1-16
• /
• 2007

The use of information on natural resources is indispensable to most agricultural activities to avoid disasters, to improve input efficiency, and to increase lam income. Most information is prepared and managed at a spatial scale called the "Hydrologic Unit" (HU), which means watershed or small river basin, because virtually every environmental problem can be handled best within a single HU. South Korea consists of 840 such watersheds and, while other watershed-specific information is routinely managed by government organizations, there are none responsible for agricultural weather and climate. A joint research team of Kyung Hee University and the Agriculture, forestry and Fisheries Information Service has begun a 4-year project funded by the Ministry of Agriculture and forestry to establish a watershed-specific agricultural weather information service based on "high definition" digital climate maps (HD-DCMs) utilizing the state of the art geospatial climatological technology. For example, a daily minimum temperature model simulating the thermodynamic nature of cold air with the aid of raster GIS and microwave temperature profiling will quantify effects of cold air drainage on local temperature. By using these techniques and 30-year (1971-2000) synoptic observations, gridded climate data including temperature, solar irradiance, and precipitation will be prepared for each watershed at a 30m spacing. Together with the climatological normals, there will be 3-hourly near-real time meterological mapping using the Korea Meteorological Administration's digital forecasting products which are prepared at a 5 km by 5 km resolution. Resulting HD-DCM database and operational technology will be transferred to local governments, and they will be responsible for routine operations and applications in their region. This paper describes the project in detail and demonstrates some of the interim results.