• 한국의류산업학회지
• /
• 제14권1호
• /
• pp.109-121
• /
• 2012

This study aims at developing ergonomics patterns for the sleeve of structural firefighting protective clothing through 3D motion analysis in order to ensure efficiency and safety of firefighters who are exposed to harmful environment at work. A new research pattern was developed by applying the total results of 3D motion analysis, changes of body surface length measurements, and 2D data on 3D body shape analysis on the size 3 patterns of the existing coat sleeve. For the sleeves, we used the body surface length of the range of shoulder's flexion and the joint angle of the range of wrist's ulnar deviation. And for the production of structural firefighting protective clothing using the research pattern, we recruited a recognized producer of structural firefighting protective clothing designated by KFI. Unlike everyday clothes, structural firefighting protective clothing should be able to fully protect the wearers from the harmful environment that threatens their lives and should not cause any restrictions on their movement. Therefore, the focus of research and development of such protective clothing should be placed on consistent development of new technologies and production methods that will provide protection and comfort for the wearer rather than production cost reduction or operational efficiency. This study is meaningful as it applied 3D motion analysis instead of the existing methods to develop the patterns. In particular, since 3D motion analysis enables the measurement of the range of motion, there should be continuous research on the development of ergonomics patterns that consider workers' range of motion.

• 대한물리의학회지
• /
• 제15권3호
• /
• pp.69-77
• /
• 2020

PURPOSE: The aim of this study was to measure changes in spine inclination and thoracolumbar structure and morphology according to upper-extremity movements with and without resistance in order to evaluate the spine stability in workers. METHODS: Forty-eight middle-aged male workers (mean age, 40.48 ± 6.27 years) participated in this study. Using the spine analysis system, changes in the inclination of the spine and structure as well as shape of the thoracolumbar spine were measured. For posture measurement, the postures of standing, lifting the right and left arms (shoulder joint 90° flexion), and lifting with both arms were measured in random order. In addition, variables were measured using a resistance of 3 kg for each posture. The statistical significance level was set at α = .05 for all variables. RESULTS: There were statistically significant differences between the front and back inclinations of the spine, kyphotic curve of the thoracic spine, lordotic curve of the lumbar spine, rotation changes in the thoracolumbar spine, and rotation changes in the T4 vertebra (p < .05). However, there was no significant difference in the left and right tilts of the spine. In the post-hoc analysis, rotation changes in the T4 vertebra showed a significant difference in posture when resistance was applied to the left and right sides CONCLUSION: Causes of musculoskeletal diseases include excessive thoracic spine rotation, torsion, and hyperlordosis of the lumbar spine. Therefore, it is necessary to improve the working environment in order to ensure a healthy posture and prevent musculoskeletal diseases that can reduce the ability to carry various and/or excessive loads.

• 터널과지하공간
• /
• 제9권1호
• /
• pp.27-35
• /
• 1999

아치형 공동의 열원 경계에 대한 열전도 특성은 반무한평면이나 원형공동에 대한 열전도 특성과는 다른 양상을 나타낸다. 본 연구에서는 지하 냉동저장 pilot plant 의 운영을 통하여 계측된 저장공동 주위안반내 온도분포패턴의 분석을 통하여 아치형 공동의 열원 경계를 갖는 새로운 열전도식을 유도하였다. 계측된 암반온도 분포패턴은 선형적 변화와 로그함수적 변화의 중간적인 양상을 보였다. 열전파에 미치는 열물성 변수들의 영향도 분석 및 도출된 열전도식과 현장계측에 의한 암반온도 분포양상의 비교를 통하여 암반의 열물성을 추정하였다. 추정된 암반의 열전도도와 비열은 실내시험에 의한 무결 암석의 열물성과 비교해 20~25%의 차이를 보였다. 이는 암반내의 절리와 지하수의 영향에 기인한 것으로 판단되는데, 앞으로 현지암반에 대한 이들 영향요소의 조사와 열물성의 측정 및 비교분석을 통하여 정량적인 상관관계의 규명이 이루어져야 할 것이다.

• 대한물리치료과학회지
• /
• 제10권1호
• /
• pp.7-17
• /
• 2003

The purpose of this study was to investigate the effect of the involved lower limb weight bearing training on symmetrical weight supporting rate improvement and gait characteristics of patients with hemiplegia including their gait velocity, cadence, stride length, step length of the non affected side, step length of the affected side, foot angle of the non affected side, foot angle of the affected side, base of support, and so on. The subject of the study was 28 men and women patients with hemiplegia from 22 to 77 age, among patients who doctor diagnosed as hemiplegia due to stroke or traumatic brain injury, were possible to do independent gait more than 45m without others assistance, the flexion contracture of hip pint was less than $15^{\circ}$, did not have contracture for knee pint and one more than $5^{\circ}$ for ankle joint, did not have contraindication for exercise or gait did not show visual defect due to brain injury. The patients, the subject of the study, were classified into 14 patients of treatment. group applying continuous involved weight bearing with general therapeutic exercise and 14 patients of control group applying general therapeutic exercise, and then analyzed their gait before and after exercise. Temporal distance gait analysis(Boening, 1977) was used to analyze their gait, and ink foot-print was applied as one of measurement methods. However, it was statistically signifiant in the change rate(%) of gait characteristics, and treatment group's patients with hemiplegia had been highly changed in gait characteristics in comparison with control group. From the above-mentioned results, could find that continuous involved weight bearing training for patients with hemiplegia was effective to improve their gait ability and it could increase the ability in comparison with general exercise.

• Journal of Welding and Joining
• /
• 제27권4호
• /
• pp.73-78
• /
• 2009

Characterization of the microweld CCFL electrode for the TFT-LCD backlight unit was carried out in terms of the glass beading heat treatment conditions. We evaluate the weld zone and parent metal of the microweld CCFL electrodes that were exposed to simulated glass beading heat treatment. The CCFL electrode was composed of the cup made with pure Ni, the pin made with pure Mo and the lead wire made with Ni-Mn alloy. Each part of the electrode was assembled together by micro spot welding process and then the assembled electrodes were exposed to simulated glass beading temperatures of $700^{\circ}C,\;750^{\circ}C$ and $800^{\circ}C$. The microstructures of the microweld CCFL electrode were observed by using optical microscope, scanning electron microscope and EDS. Micro-tensile and microhardness test were also carried out. The results indicated that the grain coarsening in the HAZs(heat affected zones) for both the cup-pin weld and pin-lead wire were exhibited and the grain coarsening of the HAZ for the cup and the lead wire was more obvious than the HAZ of the pin. The micro-tensile test revealed that the fracture occurred at the cup-pin weld zone for all test conditions. The fracture surface could be classified into two parts such as pin portion and cup portion including weld nugget. The failure was seemed to be initiated from the boundary between nugget and pin through the weld joint. The result of the microhardness measurement exhibited that the relatively low hardness value, about 105HV was recorded at the HAZ of the cup. This value was about 50% less than that of the original value of the cup. The reduction of the microhardness was considered as the cause of the grain coarsening due to welding process. It was also appeared that there was no change in electric resistance for the standard electrodes and heat treated electrodes.

• Journal of Astronomy and Space Sciences
• /
• 제26권1호
• /
• pp.31-46
• /
• 2009

An Unscented Kalman Filter (UKF) for estimation of the attitude and rate of a spacecraft using only magnetometer vector measurement is developed. The attitude dynamics used in the estimation is the nonlinear Euler's rotational equation which is augmented with the quaternion kinematics to construct a process model. The filter is designed for small satellite in low Earth orbit, so the disturbance torques include gravity-gradient torque, magnetic disturbance torque, and aerodynamic drag torque. The magnetometer measurements are simulated based on time-varying position of the spacecraft. The filter has been tested not only in the standby mode but also in the detumbling mode. Two types of actuators have been modeled and applied in the simulation. The PD controller is used for the two types of actuators (reaction wheels and thrusters) to detumble the spacecraft. The estimation error converged to within 5 deg for attitude and 0.1 deg/s for rate respectively when the two types of actuators were used. A joint state parameter estimation has been tested and the effect of the process noise covariance on the parameter estimation has been indicated. Also, Monte-Carlo simulations have been performed to test the capability of the filter to converge with the initial conditions sampled from a uniform distribution. Finally, the UKF performance has been compared to that of the EKF and it demonstrates that UKF slightly outperforms EKF. The developed algorithm can be applied to any type of small satellites that are actuated by magnetic torquers, reaction wheels or thrusters with a capability of magnetometer vector measurements for attitude and rate estimation.

• 한국방재학회 논문집
• /
• 제6권4호통권23호
• /
• pp.1-6
• /
• 2006

세계적으로 기존선 속도향상을 위해 분기기 개량 연구가 진행되어 왔다. 분기기는 선로시스템에서 구조적으로 가장 복잡한 장치로써 안정적인 구조가 필요하다. 이에 분기기 부설시 정확한 조립은 승차감과 열차주행 안전성에 크게 영향을 끼친다. 이러한 문제점 해결을 위해 최근 철도 선진국에서는 분절 PC침목을 이용한 공장에서의 사전 일체화 정밀조립 후 현장까지 운반한다. 본 연구에서는 우리나라에서 처음으로 도입된 분절형 PC침목의 안전성 평가를 위해 실내 성능평가시험을 실시하였다. 시험조건으로 현장에서 STT, MTT와 같은 유지보수 작업시 발행 가능한 최악의 조건을 고려하여 분절침목의 구조적 안전성을 검토하였다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 Proceedings of 6th International Joint Symposium on Microeletronics and Packaging
• /
• pp.35-43
• /
• 2001

Flip chip assembly on organic substrates using ACAs have received much attentions due to many advantages such as easier processing, good electrical performance, lower cost, and low temperature processing compatible with organic substrates. ACAs are generally composed of epoxy polymer resin and small amount of conductive fillers (less than 10 wt.%). As a result, ACAs have almost the same CTE values as an epoxy material itself which are higher than conventional underfill materials which contains lots of fillers. Therefore, it is necessary to lower the CTE value of ACAs to obtain more reliable flip chip assembly on organic substrates using ACAs. To modify the ACA composite materials with some amount of conductive fillers, non-conductive fillers were incorporated into ACAs. In this paper, we investigated the effect of fillers on the thermo-mechanical properties of modified ACA composite materials and the reliability of flip chip assembly on organic substrates using modified ACA composite materials. Contact resistance changes were measured during reliability tests such as thermal cycling, high humidity and temperature, and high temperature at dry condition. It was observed that reliability results were significantly affected by CTEs of ACA materials especially at the thermal cycling test. Results showed that flip chip assembly using modified ACA composites with lower CTEs and higher modulus by loading non-conducting fillers exhibited better contact resistance behavior than conventional ACAs without non-conducting fillers. Microwave model and high-frequency measurement of the ACF flip-chip interconnection was investigated using a microwave network analysis. ACF flip chip interconnection has only below 0.1nH, and very stable up to 13 GHz. Over the 13 GHz, there was significant loss because of epoxy capacitance of ACF. However, the addition of $SiO_2filler$ to the ACF lowered the dielectric constant of the ACF materials resulting in an increase of resonance frequency up to 15 GHz. Our results indicate that the electrical performance of ACF combined with electroless Wi/Au bump interconnection is comparable to that of solder joint.

• IMMUNE NETWORK
• /
• 제2권1호
• /
• pp.25-34
• /
• 2002

Background: Rheumatoid arthritis (RA) is a chronic inflammatory disease characterized by synovial hyperplasia and joint destruction. The synovial fibroblasts express cell adhesion molecules and have a role in adhesive interation with inflammatory cells in synovial tissue. It has been suggested that hypoxic conditioins are thought to exist in arthritic joints, and several studies indicate that reactive oxygen species (ROS) produced in hypoxic condition can initiate events that lead to pro-adhesive changes via increased expression of adhesion molecules. So, this study wsa designed to examine whether antioxidant can inhibit hypoxia-induced expression of ICAM-1 in cultured human synovial fibroblasts. Methods: Synovial fibroblasts were isolated from synovial tissue in patients with RA and cultured at hypoxic condition. Antioxidant, PDTC (pyrrolidine dithiocarbamate) were pre-treated for an hour before the hypoxic culture and synovial fibroblasts were harvested at 0, 6, 12, 24, 48 hours time points. Cell surface ICAM-1 expression in synovial fibroblasts was examined by the flow cytometric analysis. To analyse the expression of ICAM-1 mRNA, reverse-transcriptase polymerase chain reaction (RT-PCR) was performed. The levels of cytokines in culture supernatants were measured by ELISA, and activation of NF-${\kappa}B$ was analysed by electrophoretic mobility shift assay. The adhesive reaction between synovial fibroblasts and lymphocytes was assayed by measurement of fluorescent intensity of BCECF-AM in lymphocytes. Results: Hypoxic stimuli up-regulated the ICAM-1 expression as well as the adhesive interaction of human synvial fibroblasts to lymphocytes in a time-dependent manner, and PDTC inhibited hpyoxia-induced ICAM-1 expression and cell-cell interaction. PDTC also inhibited the hypoxia-induced activation of intracellular transcription factor, NF-${\kappa}B$. PDTC decreased the amount of hypoxia-induced production of IL-$1{\beta}$ and TNF-${\alpha}$. Conclusion: These studies demonstrate that PDTC inhibit the hypoxia-induced expression of the adhesion molecule, ICAM-1 and activation of NF-${\kappa}B$ in cultured human synovial fibroblasts.

• 한방재활의학과학회지
• /
• 제30권2호
• /
• pp.67-75
• /
• 2020

Objectives SJ004 is a natural herbal medicine that contains Acyranthes japonica Nakai and Eucommia ulmoides Oliver traditionally used for joint and spinal diseases. This study aimed to establish an efficient method of extracting SJ004 to standardize using the yield, high-performance liquid chromatography (HPLC), and antioxidant assay. Methods SJ004 was extracted with distilled water, 70% and 100% of ethyl alcohol (EtOH). The method validation of 20-hydroxyecdysone and pinoresinol diglucoside was determined by HPLC-photo diode array and the content of SJ004 was calculated. The antioxidant activity of each extract was compared and measured using total flavonoids, total phenolic compounds, 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), and ferric reducing antioxidant power according to the standard protocol. Results The yield was highest in pure water extract and lowest in 100% EtOH. But, the content of marker compounds indicating 20-hydroxyecdysone and pinoresinol diglucoside was highest in 100% EtOH extract. In the physiological activity measurement using antioxidant activity, 100% ethanol extract was highest. The limit of detection indicating 20-hydroxyecdysone and pinoresinol diglucoside were analyzed 0.33 ㎍/mL, 0.1616 ㎍/mL, and the limit of quantification were analyzed 1.01 ㎍/mL and 0.49 ㎍/mL respectively. Conclusions The experimental results showed that the extraction conditions have a significant effect on content of marker compounds and antioxidant activity. As a result of method validation, SJ004 was standardized by 20-hydroxyecdysone and pinoresinol diglucoside.