• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.2
• /
• pp.281-292
• /
• 2017

It is demanded to promote research and development of cyber weapons system and core technology in response to the ongoing cyber attack of North Korea. In this paper, core technologies of the future cyber weapon system are developed and the factors affecting the realization timing of core technologies were analyzed. 9 core technology groups and 36 core technologies are derived. Afterwards, these core technology groups are compared to the operation phase of the joint cyber warfare guideline and the cyber kill chain of Lockheed Martin. As a result of the comparison, it is confirmed that the core technology groups cover all phases of the aforementioned tactics. The results of regression analyses performed on the degree of influence by each factor regarding the moment of core technology realization show that the moment of core technology realization approaches more quickly as factors such as technology level of the most advanced country, technology level of South Korea, technology transfer possibility from the military sector to the non-military sector(spin-off factor), and technology transfer possibility from the non-military sector to the military sector(spin-on factor) increase. On the contrary, the moment of core technology realization is delayed as the degree at which the advanced countries keep their core technologies from transferring decrease. The results also confirm that the moment of core technology realization is not significantly correlated to the economic ripple effect factor. This study is meaningful in that it extract core technologies of cyber weapon system in accordance with revision of force development directive and join cyber warfare guideline, which incorporated cyber weapon system into formal weapon system. Furthermore, the study is significant because it indicates the influential factor of the moment of core technology realization.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.434-442
• /
• 2017

The purpose of this study was to examine the influence of type of malocclusion and orthodontic treatment awareness on quality of life among orthodontic patients in the region of Busan as well as to develop an educational program tailored to the type of malocclusion as a way to improve quality of life. A survey was conducted for approximately 6 months from December, 2015, and the answer sheets from 472 respondents were analyzed. The most common painful area was the teeth, and this case was most predominant in the respondents with level 2 malocclusion, who differed from others in that regard (p<0.001). Regarding the relationship between satisfaction with orthodontic treatment and quality of life, respondents who were more satisfied currently and who were neither quite confident nor quite unconfident were ahead of their counterparts in quality of life. Concerning the reason for receiving orthodontic treatment, quality of life was lower among patients who started to receive treatment due to pronunciation problems (p=0.013), chewing difficulty (p<0.001), and temporomandibular joint click sound (p<0.001). With regard to influential factors on oral health-related quality of life, time for starting to receive orthodontic treatment was most influential (p<0.001), followed by current satisfaction (p<0.001), changes in confidence (p=0.003), self-rated teeth status (p=0.008), and type of occlusion (p=0.019). Therefore, accurate analysis of the oral health status of orthodontic patients and customized oral health education are required to improve quality of life even during the period of orthodontic treatment.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.502-514
• /
• 2002

The aim of this study was to evaluate the marginal adaptation of direct class II sandwich restoration with packable composites(P-60), resin modified glass ionomer cement(Fuji-II LC), flowable compomer(Dyract Flow), flowable composites(Filtek Flow) in comparison with total bond restorations. In addition, for sandwich restorations, influence of different sandwich techniques was also evaluated. Large butt-joint box typed class II cavites with cervical margins 1mm below the cemento-enamel junction were cut into 70 extracted human molars. The cavities(7 groups, n=10) were filled using a closed/open sandwich restoration or total bond restoration technique with materials according to the manufacturer's recommandation using the single-component bonding agent for each system. Teeth were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 30-second dwell time. The teeth were then coated with nail polish 1mm short of the restoration, placed in a 2% methylene blue for 24 hours, and sectioned with diamond wheel. Sections were examined with a stereoscope to determine the extent of microleakage. Dentine /Cementum margins were analyzed for microleakage on scale of 0(no leakage) to 4(entire axial wall) and interface between materials, on scale of 0(no leakage) to 3(axial wall). Results were evaluated with Kruskal Wallis Test, corrected for ties, to determine whether there were statistically significant differences among the seven groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Dunn s Method. The results were as follows : 1. All groups showed some micoleakage in cervical portion. But there were no microleakage in interface between materials. 2. Closed sandwich restorations with Fuji-II LC and Filtek Flow had significantly lower leakage rating than total restorations with only P-60. However, open sandwich restorations with Dyract Flow showed significantly higher (P<0.05) 3. Closed sandwich restorations had significantly lower leakage rating than total restorations. However open sandwich restoration s showed significantly higher (P<0.05). 4. Sandwich restorations with Fuji-II LC were iou$.$or leakage than only P-60. Filtek Flow, Dyract Flow. But there were no statistically differences among the materials. From the results above, it could be concluded, closed sandwich restorations was effective in reducing microleakage of class II restorations. The best results showing the least microleakage were for the closed sandwich technique with Fuji-II LC and Filtek Flow.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.97-104
• /
• 2015

Purpose - The distribution of agricultural products is changing due to recent shifts in environmental free trade. Specifically, the competitiveness of domestic agricultural products has weakened as a result of the Korea-China Financial Trade Agreement. Agricultural producers are faced with increasing difficulties and organized production centers are growing in importance daily. To overcome this crisis, agricultural producer organizations are vying for environment-friendly agricultural certifications, Good Agriculture Practices (GAP) and Hazard Analysis and Critical Control Point (HACCP). In particular, as consumer demand for higher safety grows, farmers are increasing their certification rates. Therefore, this certification system is expected to help strengthen the competitiveness of agricultural producer organizations. Research design/data/methodology - Organized production centers are classified by certification. A survey was conducted with 91 organizations using factor analysis and logistic regression analysis for the examination. The factor analysis results are as follows. Raw material procurement, education·specialization, marketing, joint business, organizing ability, business management, effectiveness, certification, and larger organizations were classified as the nine types of factors. These factors affect the organized production centers and are used in the logistic regression analysis. The purpose of such research and analysis is to suggest a direction for future production center policies. Results - The basic statistical results are as follows: analysis of the producer organizations of 91 sites, average number of members per site of 1,624, and average sales of 25,961 million won. Additionally, the average income per farmer is 175 million won, and the pooling system rate is 53.5%. The factor analysis results are as follows. Factor 1 consists of contract cultivation, ongoing shipment, selection subdivision, traceability, and major retailer management. Factor 2 consists of manual cultivation, specialty selection, education program, and R&D. Factor 3 consists of advertising, various dealers, various sales strategies, and a unified sales counter. Factor 4 consists of agricultural materials co-purchase, policy support, co-shipment, and incentives. Factor 5 consists of the co-selection and pooling system. Factor 6 consists of co-branding and operating by the organization's article. Factor 7 consists of the buy-sell ratio and rate of operation of the agriculture promotion center. Factor 8 consists of bargaining power in volume and participation rate of farmer certification. Factor 9 consists of increasing new subscribers. The logistic regression analysis results are as follows. Considering the results by type of certification, the environment-friendly agricultural certification type and the GAP certification type have a (+) influence. GAP and HACCP certification types affecting the education·specialization factor have a (+) influence. Considering the results for each type of certification, the environment-friendly agricultural certification types on the effectiveness factor have (-) influence; the HACCP certification types on the organizing ability and effectiveness factor have a (-) influence. Conclusions - Agricultural producer organizations should develop plans as follows: The organizations need to secure education for agricultural production; increase the pooling system ratio for sustainable organizational development; and, finally, expand the number of agricultural producer organizations.

• Childhood Kidney Diseases
• /
• v.11 no.2
• /
• pp.185-194
• /
• 2007

Purpose : $Henoch-Sch\ddot{o}nlein$ Purpura(HSP) is a self-limited systemic small vessel vasculitis, however, renal involvement is considered to contribute to the outcome of this disease. Therefore, identifying the renal risk factors in HSP and prevention of renal involvement are important. The aim of this study is to investigate whether early steroid administration in HSP could reduce the rate of renal involvement. Methods : We retrospectively studied two hundred children with HSP. We had administrated steroids orally to resolve of severe abdominal pain, joint and scrotal symptoms. We analyzed the relationship between the steroid therapy to relieve systemic symptoms and the subsequent renal involvement in HSP. Results : There were no significant differences in the incidence and duration of renal involvement according to steroid administration and its duration. In HSP patients with renal manifestations, steroid administration group showed a tendency of hematuria and steroid non-administration group showed a tendency of proteinuria, however, we could not find statistically significant differences in each group. There was no significant difference in the duration of purpura presence according to steroid administration. However, persistent purpura increased the incidence and the duration of renal involvement. Conclusion : Early steroid administration did not reduce the risk of renal involvement, there-fore, steroid could not prevent delayed nephritis in children with HSP On the other side, Persistent Purpura, known to be not related to steroid therapy, was associated with renal involvement. We suggest that early steroid administration could not be useful in preventing the renal involvement in HSP. (J Korean Soc Pediatr Nephrol 2007;11:185-194)

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.27-27
• /
• 2009

드라이브 샤프트는 일반적으로 엔진에서 발생된 회전력을 바퀴에 직접 전달하는 동시에 조향기능을 수행하는 자동차 부품이다. 최근에 경량화를 통한 에너지 절감을 위하여 기존 스틸소재를 알루미늄으로 대체하는 방안에 대한 연구가 집중되고 있다. 그러나 알루미늄 단일소재로 드라이브 샤프트를 제조하는 것은 비경제적이며 또한 기 개발된 자동차 부품들과의 연결을 고려하여 알루미늄 튜브와 스틸 요크의 이종금속 접합기술이 요구된다. 전자기 펄스용접은 전자기력을 이용하여 용접대상물을 고속으로 충돌시켜 용접하는 기술로서 열 발생이 적어 재료의 특성차로 인한 결함 및 변형이 발생하지 않아, 이종금속간 고품질 용접이 가능하며, 전자기 펄스 용접부의 품질과 밀접한 관계를 갖는 공정변수 경우 모재와 접합재의 재질 따라 적정 공정변수 범위가 변화되므로 공정에 따른 데이터의 축적은 대단히 중요하다. 전자기 펄스 용접을 이용한 이종금속 접합시 접합부 품질에 영향을 미치는 공정변수는 충전전압, 모재와 접합재 사이의 간격 및 접합재의 직경과 두께의 비(D/T비)로서 보고되었으며, Al/Steel 이종 금속 접합시 이들 공정변수가 접합부에 미치는 영향 및 최적의 공정변수 도출을 위한 연구는 시도되지 않았다. 따라서 본 연구는 전자기 펄스 용접기술을 이용한 Al/Steel 이종금속 접합 실험을 통하여 전자기 펄스용접의 적정성과 최적의 충전전압, 모재와 접합재 사이의 간격, D/T비를 도출하고자 한다. 전자기 펄스 용접 장치는 한국생산기술연구원과 웰메이트(주)에서 공동으로 개발한 $120{\mu}F$의 캐패시터 6개로 구성된 'W-MPW36'을 사용하였으며 이 장치의 최대충전전압과 최대접합용량은 각각 10kV, 36kJ이다. 접합재는 전기 전도율의 높은 Al 1070 파이프를 사용하였으며 모재는 기존 스틸 요크재인 SM45C 환봉을 사용하였다. 기보고된 연구를 통하여 코일과 접합재 사이의 간격이 좁을수록 높은 전자기력이 접합재에 작용하는 것을 확인하였으나 코일내 접합재와 모재 삽입 편의를 위하여 1mm로 설정하였다. 접합부의 품질 평가를 위하여 수압시험을 실시하였으며, 시험 후 접합부 단면을 주사전자현미경(SEM)을 이용하여 관찰하였다.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.100-100
• /
• 2009

This paper is concerned with numerical analyses of residual stresses in welds and material's susceptibility to stress corrosion cracking (SCC) for the primary piping system in nuclear power plants: Both the dissimilar metal weld (DMW) for stainless steel to low alloy steel joints and the similar metal weld (SMW) for forged stainless steel to cast stainless steel joints are considered. Thermal elasto-plastic analyses using the finite element method (FEM) are performed to predict residual stresses generated in fabrication welding and its related processes for both the DMW and SMW, including effects of quenching for cast stainless steel piping, machining of the DMW root, and grinding of the SMW root. As a result, the effect of quenching should be included in the evaluation of residual stresses in the SMW for the cast stainless steel piping. It is deemed that residual stresses in both the DMW and SMW would not affect the SCC susceptibility of the welds providing that the welding processes are completed without any weld repair on the inside wall of the joint. However, the grinding process if performed on the safe-end to piping weld, would produce a high level of residual stresses in the inner surface region and thus a stress improvement process (e.g. buffing) should be considered to reduce susceptibilities to SCC.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.4
• /
• pp.398-405
• /
• 2001

The rivet joint has typical structural feature that can be initiation site for the fatigue crack due to the combination of local stress concentration around rivet hole and the moisture trapping. From a viewpoint of structural assurance, it is crucial to evaluate the size of crack around the rivet holes by appropriate nondestructive evaluation techniques. Lamb wave that is one of guided waves, offers a more efficient tool for nondestructive inspection of plates. The neural network that is considered to be the most suitable for pattern recognition has been used by researchers in NDE field to classify different types of flaws and flaw sizes. In this study, clack size evaluation around the rivet hole using the neural network based on the back-propagation algorithm has been tarried out by extracting some features from the ultrasonic Lamb wave for A12024-T3 skin panel of aircraft. Special attention was paid to reduce the coupling effect between the transducer and the specimen by extracting some features related to time md frequency component data in ultrasonic waveform. It was demonstrated clearly that features extracted from the time and frequency domain data of Lamb wave signal were very useful to determine crack size initiated from rivet hole through neural network.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.98-106
• /
• 2011

The deck of steel box girder bridges is composed of deck plate, longitudinal rib, and transverse ribs. The orthotropic steel decks have high possibility to fatigue damage due to numbers of welded connection part, the heavy contact loadings, and the increase of repeated loadings. Generally, the local stress by the repeated loadings of heavy vehicles causes the orthotropic steel deck bridge to fatigue cracks. The increase of traffic volume and heavy vehicle loadings are promoted the possibility of fatigue cracks. Thus, it is important to exactly evaluate the structural behavior of bridge considering the contact loading area of heavy vehicles and real load patterns of heavy trucks which have effects on the bridge. This study estimated the effect of contact area of design loads and real traffic vehicles through the finite element analysis considering the real loading conditions. The finite element analysis carried out 4 cases of loading patterns in the orthotropic steel deck bridge. Also, analysis estimated the influence of contact area of real truck loadings by the existence of diaphragm plate. The result of finite element analysis indicated that single tire loadings of real trucks occurred higher local stress than one of design loadings, and especially the deck plate got the most influence by the single tire loading. It was found that the diaphragm attachment at joint part of longitudinal ribs and transverse ribs had no effects on the improvement of structural performance against fatigue resistance in elastic analysis.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.183-191
• /
• 2015

Studies on the environment-friendly and permanent low energy saving measure are and will continue to be an eternal challenge. However, the demand is high for the technologies that can save energy significantly in everyday life that produce tangible benefits for the users by applying saving factors and that anyone can access easily when it comes the related procedure. Government policies related to the improvement of energy effect in the existing building structure are characterized by complex procedure. Moreover, cost required and reliability issue emerge when request is made to an expert. Accordingly, this study seeks to present energy improvement plan that can be utilized simply and conveniently at any place, any time by enabling customized design according to individual taste by enabling energy change amount and grade prediction when the users select only the part that they want to replace by using a simple program.