• 한국운동역학회지
• /
• 제29권3호
• /
• pp.145-155
• /
• 2019

Objective: The purpose of this study was to compare the physical characteristics (bone mineral density, joint muscle strength) and running biomechanics between older adults and young adult runners to understand the changes of running strategy by aging. Method: Bone mineral density (Dual Energy X-ray Absorptiometry, USA) of lower lower extremity and muscle strength (Cybex Humac Norm [DEXA], CSMI, USA) were measured to identify the physical characteristics of 10 elderly (age: $67.70{\pm}3.30yrs$, height: $1.68{\pm}0.04m$, mass: $67.70{\pm}3.80kg$) and 10 young adults (age: $21.20{\pm}0.42yrs$, height: $1.73{\pm}0.06m$, mass: $72.11{\pm}4.15kg$). Running data was collected by using an instrumented treadmill (Bertec, USA) and 7 infrared cameras (Oqus 300, Qualisys, Sweden). Two-way repeated ANOVA analysis was used to analyze results at a significant level of .05 with Bonferroni post hoc analysis. Results: Compared to the young adult group, the elderly group showed statistically significant difference in physical characteristics and in running characteristics. Elderly runners showed lower BMD and muscle strength compared with young runners (p<.05). In the running parameters, elderly runners tend to show shorter contact time and stride length compared with young runners (p<.05). In the joint angles, elderly runners showed smaller range of ankle motion compared with young runners (p<.05). Finally, elderly runners showed lower level of joint moment, joint power, and GRF compared with young runners in each running speed (p<.05). Conclusion: The running behavior of the elderly performed periodic running was similar to many variables of young adults. However, there were noticeable differences found in the ankle joints and most kinetic variables compared with young adult runners. This discrepancy may propose that elderly runners should consider appropriate running distance and intensity in the program.

• Geomechanics and Engineering
• /
• 제30권3호
• /
• pp.281-291
• /
• 2022

Complex rock masses include various joint planes, bedding planes and other weak structural planes. The existence of these structural planes affects the mechanical properties, deformation rules and failure modes of jointed rock masses. To study the influence of the parameters of a nonpersistent joint network on the mechanical properties and failure modes of jointed rock masses, synthetic rock mass (SRM) technology based on discrete elements is introduced. The results show that as the size of the joints in the rock mass increases, the compressive strength and the discreteness of the rock mass first increase and then decrease. Among them, the joints that are characterized by "small but many" joints and "large and clustered" joints have the most significant impact on the strength of the rock mass. With the increase in joint density in the rock mass, the compressive strength of rock mass decreases monotonically, but the rate of decrease gradually decreases. With the increase in the joint dip angle in rock mass, the strength of the rock mass first decreases and then increases, forming a U-shaped change rule. In the analysis of the failure mode and deformation of a jointed rock mass, the type of plastic zone formed after rock mass failure is closely related to the macroscopic displacement deformation of the rock mass and the parameters of the joints, which generally shows that the location and density of the joints greatly affect the failure mode and displacement degree of the jointed rock mass. The instability mechanism of jointed surrounding rock is revealed.

• 근관절건강학회지
• /
• 제14권2호
• /
• pp.181-187
• /
• 2007

Purpose: The purpose of the study was to identify the relationship between obesity and bone mineral density in middle aged women. Methods: A cross-sectional survey design was utilized with a check list and physiological measurements. A total of 827 convenient samples were recruited from women who lived in the community. Bone mineral density was measured by T-score using the pixi method of Lumar on the left heel. Descriptive statistics and pearson correlation coefficient were utilized for data analysis. Results: Most were assessed as having normal weight(37.9%) or obese (57.4%) by BMI. Only 32% was assessed as having normal bone mineral density, while 40.3% had osteopenia, and 27.7% as osteoporosis. The BMI scores were significantly related to age, and episodes of fractures. Those with lower bone mineral density reported significantly more episodes of fractures and chronic disease. The T scores of Bone mineral density were significantly correlated with the scores of BMI (r= .126, p< .001). Conclusion: There is a strong need to develop intervention programs for this age group to manage bone mineral density loss to prevent occurrences of osteoporosis, and episodes of fracture.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2001년도 학술발표회 논문집
• /
• pp.115-122
• /
• 2001

• 근관절건강학회지
• /
• 제8권2호
• /
• pp.278-286
• /
• 2001

With the aging of society a great deal of interest is being placed on the value of longitudinal data in evaluating physiological losses. We present data on test-one/test-two reliability and reproducibility for measures of training, bone density from a longitudinal study of master athletes. Fifty-two males (mean age at test $1=58.2{\pm}9.8\;years$) and thirty-two females ($54.4{\pm}8.8\;years$) were selected from the study population. Bone mineral density was determined using DEXA (Hologic 1500). The characteristics of the subjects are presented below as $means\;{\pm}\;S.D$. The data was imported into the Statistical Package for the Social Science (SPSS 9.0, Chicago, IL). Paired t-tests were performed between visit 1 and visit 2 in subjects. Pearson correlations were performed. The results of this study indicate the measures of training history, body mass and bone density are reasonably stable and reproducible. We conclude that body composition and bone density parameters are stable and reproducible over time in active older subjects. Physiologic measures in master athletes are fairly stable, and reproducible over time Longitudinal studies investigating age-related changes in master athletes need to be conducted on a time schedule of greater than two years.

• 근관절건강학회지
• /
• 제15권2호
• /
• pp.166-174
• /
• 2008

Purpose: The purpose of this study was to examine the effect of a 8-week dynamic yoga program on body composition and blood lipids in middle-aged post-menopausal women. Method: Twenty participants were allocated to the yoga group (YG, n=10) or the control group (CG, n=10). They were assessed for lean body mass, percent body fat, waist to hip ratio, total cholesterol, low density lipoprotein cholesterol, high density lipoprotein cholesterol, and triglyceride both before and after intervention. The yoga group participated in the program lasting $50{\sim}60$ minutes, five times a week for 8 weeks. Results: Unlike the control group, the yoga group showed a significant decrease in total cholesterol, low density lipoprotein cholesterol, percent body fat, and waist hip ratio after the yoga training. However, changes in lean body mass, high density lipoprotein cholesterol, and triglyceride level during the intervention period were not different between the yoga group and the control group. Conclusion: The 8-week dynamic yoga program could be adopted to prevent cardiovascular diseases in middle-aged post-menopausal women by promoting body composition & blood lipids.

• 근관절건강학회지
• /
• 제15권1호
• /
• pp.88-95
• /
• 2008

Purpose: This study was to evaluate and compare the effectiveness of the Resistance Exercise Program on pain, stiffness, ADL and bone mineral density in Arthritis Patients at home. Methods: Forty-two patients participated in this study and they were divided randomly into two groups (exercise and control group). Two subjects dropped during the study period. The exercise group had a structured training which was 50 minutes in duration, five times per week for a period of 16 weeks and the control group without any scheduled treatment. Data were gathered for 16 weeks (May 21, 2007- September 10, 2007) and were analyzed by using SPSS Win 12.0. Results: The pain, stiffness, ADL, balance and bone mineral density in the exercise group were improved significantly after the Resistance Exercise Program. However, a significant improvement on the above mentioned variables was not observed in the control group.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.329-337
• /
• 2000

An investigation has been performed to develop an analysis tool based on a nonlinear beam theory, which can be used to predict the long-term behavior of an artificial hip joint. The nonlinear behav ior of the femur arise from the coupled dependence of the bone density and the mechanical properties on each other. The beam theory together with its numerical algorithm is developed to take into account the nonlinear bone remodeling process of the femur that is long enough to be assumed as a beam. A piecewise linear curve for the bone remodeling rate is used in the bone remodeling theory and the surface area density of bone is modeled as the third order polynomial function of bone density. At each section of the beam, a constant curvature is assumed and the longitudinal strains are also assumed to vary linearly across the section. The Newton-Rhapson iteration method is used to solve the nonlinear equations for each cross section of the bone and a backward method is used to march along the time. The density and the remodeling signal ar, calculated along with time for the various time steps, and the developed beam theory has been verified by comparing with the results of finite element analysis of a remodeling bone with an artificial hip joint of titanium prosthesis subjected to uni-axial loads and pure bending moment. It is concluded that the developed beam theory can be used to predict the long-term behavior of the femur and thus to design the artificial hip prosthesis.

• 대한디지털의료영상학회논문지
• /
• 제10권1호
• /
• pp.35-40
• /
• 2008

I.objective The composition method with acquiring 2${\sim}$5 image not only lack perfection in compensating the geometrical distortion but could also cause inaccurate connection problem of compensating the geometrical distortion but could also cause inaccurate connection problem of continuing bone structure due to the enlargement ratio difference of ruller and bone, density difference in image composition process. This paper studies those mentioned problems through the experiments. II. Object and method Experiment 1 After attaching 3 step wedge(Pb) on detector and 2 ruller on upper, lower part of the step wedge, we have exposed them to create density difference between 1st image and 2nd image, then examined if there were any errors. Experiment 2 1st 100cm ruller was attached on the center of detector, and by escalating the distance between 2nd 100cm ruller and detector 5cm, 10cm, 15cm respectively, we investigated if there any errors caused by enlargement ratio. Experiment 3 The ruller was placed on detector, a joint photographing was performed through spot photographing after fully operating the electric field photographing to include hip joint ${\sim}$ ankle joint part and we have compared the values from two methods. III. Result : A horizontal axis error was caused when photopraphing is not poerated in equal density since the image shifted horizontally in accordance with the difference of Pb step wedge 1 due to the density difference, as the result of Epperiment 1.

• Ocean Systems Engineering
• /
• 제9권3호
• /
• pp.287-328
• /
• 2019

Comprehensive understanding of the flood risk assessments via frequency analysis often demands multivariate designs under the different notations of return periods. Flood is a tri-variate random consequence, which often pointing the unreliability of univariate return period and demands for the joint dependency construction by accounting its multiple intercorrelated flood vectors i.e., flood peak, volume & durations. Selecting the most parsimonious probability functions for demonstrating univariate flood marginals distributions is often a mandatory pre-processing desire before the establishment of joint dependency. Especially under copulas methodology, which often allows the practitioner to model univariate marginals separately from their joint constructions. Parametric density approximations often hypothesized that the random samples must follow some specific or predefine probability density functions, which usually defines different estimates especially in the tail of distributions. Concentrations of the upper tail often seem interesting during flood modelling also, no evidence exhibited in favours of any fixed distributions, which often characterized through the trial and error procedure based on goodness-of-fit measures. On another side, model performance evaluations and selections of best-fitted distributions often demand precise investigations via comparing the relative sample reproducing capabilities otherwise, inconsistencies might reveal uncertainty. Also, the strength & weakness of different fitness statistics usually vary and having different extent during demonstrating gaps and dispensary among fitted distributions. In this literature, selections efforts of marginal distributions of flood variables are incorporated by employing an interactive set of parametric functions for event-based (or Block annual maxima) samples over the 50-years continuously-distributed streamflow characteristics for the Kelantan River basin at Gulliemard Bridge, Malaysia. Model fitness criteria are examined based on the degree of agreements between cumulative empirical and theoretical probabilities. Both the analytical as well as graphically visual inspections are undertaken to strengthen much decisive evidence in favour of best-fitted probability density.