• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.55-60
• /
• 2010

틸팅형 고속열차의 차체에 적용되는 하니컴 복합재 조인트 구조물의 경우 운행중 외팔보형 굽힘하중을 받게된다. 하이브리드 복합재 조인트 구조물에 대한 굽힘시험평가를 수행하기 위해 실제 틸팅열차 차체 구조물에서 조인트부를 절단 채취하여 시험편으로 제작하였다. 굽힘시험결과 시험편의 파괴거동은 정적하중과 피로하중하에서 확연히 달라짐을 보였다. 정적굽힘하중 하에서는 하니컴 코어 영역에서 전단변형과 파괴가 발생하였으며, 피로굽힘하중 하에서는 복합재 표피층과 하니컴 코어층 사이에서 계면분리가 발생하거나, 또는 금속재 언더프레임과의 용접부에서 파괴가 발생하였다. 이러한 파괴거동은 다른 산업분야에서 사용되는 유사한 구조의 하니컴 복합재 조인트 구조물에서도 발생할 수 있기 때문에, 본 실험 결과를 하니컴 복합재 조인트 구조물의 설계변수를 개선하기 위해 이용될 수 있다.

• Journal of Welding and Joining
• /
• 제29권1호
• /
• pp.99-106
• /
• 2011

Joint strength between a solder ball and a pad on a substrate is one of the major factors which have effects on electronic device reliability. The effort to improve solder joint strength via surface cleaning, heat treatment and solder composition change have been in progress. This paper will discuss the method of solder ball joint strength improvement using LF hydrogen radical cleaning treatment and focus on the effects of surface treatment condition on the solder ball shear strength and interfacial reactions. In the joint without radical cleaning, voids were observed at the interface. However, the specimens cleaned by hydrogen-radical didn't have voids at the interface regardless of cleaning time. The shear strength between the solder ball and the pad was increased over 120%(about 800gf) when compared to that without the radical treatment (680gf) under the same reflow condition. Especially, at the specimen treated for 5minutes, ball shear strength was considerably increased over 150%(1150gf). Through the observation of fracture surface and cross-section microstructure, the increase of joint strength resulted from the change of fracture mode, that is, from the solder ball fracture to IMC/Ni(P) interfacial fracture. The other cases like radical treated specimen for 1, 3, 7, 9min. showed IMC/solder interfacial fracture rather than fracture in the solder ball.

• International Journal of Automotive Technology
• /
• 제6권6호
• /
• pp.657-663
• /
• 2005

Recently, weight reduction of vehicles has been of great interest, and consequently the use of composite materials in the automotive industry is increasing every year. Composite sandwich panels which consist of two skins and core materials are replacing steels in automotive floor and door. The substitution of one material for another is accompanied by change of joining method, so that adhesive bonding has been popularly used for joining method of composite materials. In the case of adhesive bonding of composite materials, there could be loss in the joint strength by delamination of two faceplates or cracking on faceplate. Thus, it is necessary to prevent loss in the joint strength by designing the joint geometry. In the present paper, adhesive bonding of aluminum sandwich sheet was tried. For understanding joint behavior, studies on stresses in the single lap joint were reviewed and failure modes of composite material were analyzed. Strength tests on the single lap joint consisting of aluminum sandwich sheet and steel were performed and variation of the joint strength with the joint configuration was shown. Based on these results, design guide of adhesive bonding in aluminum sandwich sheet was suggested.

• 대한치과보철학회지
• /
• 제38권6호
• /
• pp.757-764
• /
• 2000

Statement of the problem. All-ceramic post-and-core restorations offer a number of advantages compared with systems that use metal build-ups. In certain clinical cases, however, fractures at the joint between the post and core build-up have been reported. Purpose. The objective, therefore, is to improve the joint between the post and the core build-up. Material and methods. Three different methods were used to prepare all-ceramic post-and-core restorations; pressing IPS Empress core build-ups to CosmoPost zirconia posts, cement-ing IPS Empress core build-ups to CosmoPost zirconia posts and Celay-milling of zirconia blanks. A series of ten restorations was prepared for each of the three methods. The post-and-core complexes were tested to failure with the load applied perpendicular to the post axis. The load and deflection at fracture were recorded. Results. The highest breaking load and highest deflection were recorded for the cementing technique with values of 25.3 N and $394{\mu}m$, respectively, The corresponding values for the pressed core build-ups and the milled zirconia core build-ups were 22 N and $301{\mu}m$, and 13 N and $160{\mu}m$, respectively. All the differences are statistically significant (p=0.05). Regarding the load-dependence of the deflection, the cemented core build-ups again demonstrated the highest value with $15.5{\mu}m/N$. The difference in the values of $13.6{\mu}m/N\;and\;13{\mu}m/N$ recorded for the pressed-on and milled core build-ups, respectively, were statistically insignificant. Conclusion. In regard to the high fracture resistance of zirconia post, adhesive cementing the core build-up to the post offers a viable alternative to the conventional pressing technique. The elastic bond between the rigid high-strength zirconia post and the core build-up presents an additional advantage.

• 콘크리트학회지
• /
• 제3권2호
• /
• pp.123-132
• /
• 1991

건축구조물의 초고층화, 대형화 및 특수화 되어가는 현재의 실정에 고강도콘크리트의 사용은 필수적은 부분으로 대두되기 시작하였다. 그러나 이러한 필수적인 필요성에도 불구하고 ACI Building Code에서는 콘크리트의 강도가 420kg/$cm^2$이하에 관한 구조설계기준만을 제안하고 있는 설정이므로 420kg/$cm^2$을 넘는 고강도 콘크리트 사용시이에 따른 정확한 규준식이 정립되어 있지 못한 설정이다. 따라서 본 연구는 고강도 콘크리트 보-기둥접합부 설계에 기본적인 자료를 제공하고자 하였으며, 시험체는 총 5개로서 선정된 주요변수는 콘크리트 압축강도(f'c=300kg/$cm^2$과 800kg/$cm^2$), 하중재하방법(일방향 단조하중과 반복하중) 그리고 접합부내의 구부림철근 사용 유.무등으로 하였다. 이상과 같은 변수에 따른 실험결과로서, 반복하중을 수행한 시험체가 일방향단조하중에 수행한 시험체의 최대하중수행능력에 비해서 73%정도밖에 미치지 못하였으며 접합부내에 기준배근을 한 시험체에 비해서 접합부내의 사인장 대각균열 발생억제 및 접합면의 균열들이 접합부내 기둥으로 진전하는 것을 막을 수는 있었으나 접합부내를 과도하게(횡보강근+구부림철근)보호함으로써 균열들이 분담되지 않고 보-기둥접합면에 집중되어 피해가 가중되는 현상을 보이게 되므로 고강도 콘크리트 보-기둥접합부 설계시 접합부내에 구부림철근의 사용은 적절하지 않은 것으로 보인다. 최대하중수행능력에 비해서 73%정도밖에 미치지 못하였으며 접합부내에 기준배근을 한 시험체에 비해서 접합부내의 사인장 대각균열 발생억제 및 접합면의 균열들이 접합부내 기둥으로 진전하는 것을 막을 수는 있었으나 접합부내를 과도하게(횡보강근+구부림철근)보호함으로써 균열들이 분담되지 않고 보-기둥접합면에 집중되어 피해가 가중되는 현상을 보이게 되므로 고강도 콘크리트 보-기둥접합부 설계시 접합부내에 구부림철근의 사용은 적절하지 않은 것으로 보인다.

• 한국응용과학기술학회지
• /
• 제37권3호
• /
• pp.496-508
• /
• 2020

This study reviews studies on the core stabilization of respiratory muscle training for the elderly health. Previous research data and presenting basic literature data suggest that respiratory activation is an important mechanism for core strengthening via exercise interventions for the elderly. The review found that first, the mechanism of improving the respiratory muscles weakened by aging to address the loss of core function due to old age sarcopenia among the elderly results entails promoting the autonomic nervous system by focusing on the respiratory muscle activation pattern, the core muscle sensation mobilized for body centering. Second, nerve roots, intraperitoneal pressure, and deep muscles in the trunk of the body can be promoted while controlling respiratory stimulation with cognitive feedback. Effortful inspiration increases the activation of respiratory assistive muscles and effortless exhalation can improve the core muscle mobilization by involving abdominal muscles. Third, through respiratory muscle training, the elderly can increase their awareness of spinal centering and improve the ability to control the deep core muscles that must be mobilized for core stabilization. In conclusion, respiratory muscle training to increase the utilization of the trunk muscles seems to be a useful core stabilization exercise for the elderly with chronic tension and joint degeneration.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.15-19
• /
• 2008

The use of Precast Concrete (PC) stairways is increasing to replace existing Reinforced Concrete (RC) stairways for the faster construction and the better quality control. Among several already developed PC stairway construction methods, RC Core Sequential Construction Method by Using PC Stairways (COSEC) has advantages of 1) allowing core of a building to be built prior to PC stairways so that two different procedures will not interfere with each other, and 2) having a newly developed joint connection with the core so that the RC core and PC stairways can be easily put together. In this paper, cases of several construction sites with the PC stairways method are analyzed. The elements of the developed method are described for further application and improvement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.57-59
• /
• 1994

The transformer core using amorphous Fe-B-Si ribbon were designed by magnetostatic software. The basic model of core is Butt-Lap-Step type, non-culled typo and stair type core joint. And the variables are the number of ribbons for on step, flux density and core shape.

• 국제초고층학회논문집
• /
• 제11권3호
• /
• pp.189-196
• /
• 2022

The practical difficulties of construction will impose many restrictions on the structural design, and the construction method can also provide unexpected ideas for solving design problems. Through the discussion of three issues closely related to construction in the structural design of Wuhan Center, this paper illustrates the importance of in-depth consideration of the construction situations in the structural design stage. The topics of "Connection between Embedded Steel Plates in Steel Plate Composite Shear Wall" and "Connection Joint between Outrigger Truss and Core Wall" are about how to facilitate on-site construction by simplifying and optimizing detail design. The topic of "Adjusting Internal Force Distribution by Optimizing Construction Sequence" is about how to make the construction process a tool for structural design.

• Steel and Composite Structures
• /
• 제28권1호
• /
• pp.83-98
• /
• 2018

This research was conducted to study the behavior of exterior concrete beam-column joints with reinforced shape memory alloy (SMA) bars tested under cyclic loading. These bars benefit from superelastic behavior and can stand high loads without residual strains. The experimental part of the study, 8 specimens of exterior concrete beam-column joints were made and tested. Two different types of concrete with 30 and 45 MPa were used. Four specimens contained SMA bars and 4 specimens contained steel bars in beam-column joints. Furthermore, different transverse reinforcements were used in beams investigate the effects of concrete confinement. Specimens were tested under cyclic loading. Results show that SMA bars are capable of recentering to their original shape after standing large displacements. Due to the superelastic behavior of SMA bars, cracks at the joint core vanish under cyclic loading. As the cyclic loading increased, bending failure occurred in the beam outside the joint core. In the analytical parts of the study, specimens were simulated using the SeismoStruct software. Experimental and analytical results showed a satisfactory correlation. Plastic hinge length at the beam joint for specimens with SMA and steel bars was calculated by empirical equations, experimental and analytical results. It was shown that Paulay's and Priestley's equations are appropriate for concrete beam-column joints in both types of bars.