• 대한정형외과스포츠의학회지
• /
• 제11권1호
• /
• pp.1-7
• /
• 2012

손목 관절은 신체의 관절 중 가장 많은 골들과 다양한 인대 및 근육 의해 형성되는 복합 관절로 그 해부학적 구조가 복잡하여 이해하기 힘든 관절이다. 손목 관절은 하나의 관절 공간이 아닌 요척골과 근위 수근골 사이에 형성되는 요수근 관절(radiocarpal joint)과 근위 수근골과 원위 수근골 사이에 형성되는 중수근 관절(midcarpal joint) 그리고 원위 요골과 척골두에 의해 구성되는 원위 요척 관절(distal radioulnar joint)로 구성되며 각각의 관절은 정상적으로 각기 분리되어 있다. 손목 관절에 발생하는 질환과 외상에 대해 치료하기 위해서는 손목관절의 정상 해부학에 대한 정확한 이해가 필수적이다. 본 종설에서는 손목관절의 해부학에 대해 자세히 알아 보고자 하였다.

• 대한인간공학회지
• /
• 제21권1호
• /
• pp.81-93
• /
• 2002

This study aims to provide joint angles of comfort for females, based on the psychophysical scaling method. Ten female subjects participated in the experiment for measuring perceived discomfort for varying joint motions. The subjects were instructed to maintain given joint motions for a minute, and to rate their perceived discomfort for the motions during a minute's rest by using the free modulus method of the magnitude estimation. Joint angles of comfort were calculated from the regression equations based on the experimental results, in which levels of joint motions were used as independent variables and perceived discomforts as dependent variables. The results showed that joint angles of comfort for the joint motions investigated were much smaller than full range of motions for corresponding joint motions. The ratios of joint angle of comfort to its range motion for the hip were found to be smallest of all joint motions dealt with in this study, and those for the neck were the largest. In addition, comfortable joint angles for females were much smaller than those for males. It is recommended that when designing or evaluating workplaces ergonomically, different comfortable joint angles should be applied according to workers' or population's gender.

• Structural Engineering and Mechanics
• /
• 제52권2호
• /
• pp.427-443
• /
• 2014

This paper presents detailed analysis of the internal forces of interior beam-column joints of reinforced concrete (RC) frames under seismic action, identifies critical joint sections, proposes consistent definitions of average joint shear stress and average joint shear strain, derives formulas for calculating average joint shear and joint torque, and reports simplified analysis of the effects of joint shear and torque on the flexural strengths of critical joint sections. Numerical results of internal joint forces and flexural strengths of critical joint sections are presented for a pair of concentric and eccentric interior connections extracted from a seismically designed RC frame. The results indicate that effects of joint shear and torque may reduce the column-to-beam flexural strength ratios to below unity and lead to "joint-yielding mechanism" for seismically designed interior connections. The information presented in this paper aims to provide some new insight into the seismic behavior of interior beam-column joints and form a preliminary basis for analyzing the complicated interaction of internal joint forces.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.168-171
• /
• 2001

Due to intrinsic load eccentricity, severe peel stress concentration occurs at both ends of the single-lap joint. To avoid load eccentricity as well as the singular tensile peel stress in the joint interface, composite wavy-lap joint is proposed. In this paper, refined 3-D stress analysis of wavy-lap joint is performed by finite element method using parallel mutifrontal solver. Analysis results show that the singular tensile peel stress concentration is totally avoided in wavy-lap joint, and that loads are more evenly transferred over the length of the joint. Therefore, the strength of wavy-lap joint is significantly higher than that of conventional single-lap joint. And it is believed that even higher strengths can be obtained by optimizing the new design configuration.

• The Journal of Korean Physical Therapy
• /
• 제25권2호
• /
• pp.117-125
• /
• 2013

Purpose: The purpose of this study was to investigate changes in movement strategies of lower limb joints depending on the type of heel during sit-to-stand. Methods: Twenty healthy females participated in this study. All subjects performed sit-to-stand three times each with three different types of heels - bare feet, 9 cm high-heeled shoes, and unstable shoes. Trails were conducted in random order. Three-dimensional motion analysis systems were used for collection and analysis of the kinematic data of lower limb movements. Results: Results of this study showed kinematic differences in pelvis, hip joints, knee joints, and ankle joints during sit-to-stand based on the type of heels. At the initial sit-to-stand, hip joint flexion, knee joint flexion, ankle joint flexion, and ankle joint inversion showed significant differences. The maximal angles of hip joint flexion, hip joint adduction, knee joint flexion, ankle joint flexion, and ankle joint inversion were significantly different, while hip joint adduction, pelvic forward tilt, hip joint rotation, knee joint flexion, ankle joint flexion, and ankle joint inversion differed significantly during the terminal of sit-to-stand. Conclusion: Therefore, the type of heel played an important role in selection of lower limb movements during sit-to-stand which were essential parts of daily life movements.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.705-718
• /
• 2014

This paper presents an analytical model for determining the transverse reinforcement required for reinforced concrete exterior beam-column joints subjected to reversed cyclic loading. Although the joint aspect ratio can affect joint shear strength, current design codes do not consider its effects in calculating joint shear strength and the necessary amount of transverse reinforcement. This study re-evaluated previous exterior beam-column joint tests collected from 11 references and showed that the joint shear strength decreases as the joint aspect ratio increases. An analytical model was developed, to quantify the transverse reinforcement required to secure safe load flows in exterior beam-column joints. Comparisons with a database of exterior beam-column joint tests from published literature validated the model. The required sectional ratios of horizontal transverse reinforcement calculated by the proposed model were compared with those specified in ACI 352R-02. More transverse reinforcement is required as the joint aspect ratio increases, or as the ratio of vertical reinforcement decreases; however, ACI 352R-02 specifies a constant transverse reinforcement, regardless of the joint aspect ratio. This reevaluation of test data and the results of the analytical model demonstrate a need for new criteria that take the effects of joint aspect ratio into account in exterior joint design.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1994년도 춘계학술대회논문집
• /
• pp.115-123
• /
• 1994

A man model can be used as an effective tool to design ergomonically sound products and workplaces, and subsequently evaluate them properly. For a man model to be truly useful, it must be integrated with a posture prediction model which should be capable of representing the human arm reach posture in the context of equipments and workspaces. Since the human movement possesses redundant degrees of freedom, accurate representation or prediction of human movemtn was known to be a difficult problem. To solve this redundancy problem, the psychophysical cost function can predict the arm reach posture accurately. But the joint discomfort that human feels at the joint can not be predicted since the effects of external factors on the joint discomfort is not known. In this study a psychophysical experi- ment using the magnitude estimation technique was performed to evaluate the effects of external factors such as joint, joint angle and Perceived Exertion Ratio on the joint discomfort. Results showed that the joint discomfort increased as the Perceived Exertion Ratio increased, but the relation is not linear and was affected not only by the joint but also by the joint angle for the same Perceived Exertion Ratio. The interaction effect of the joint and the joint angle was also significant. From the results it is needed to develope the cost function which can predict the joint discomfort considering the joint, joint angle and external load.

• 제어로봇시스템학회논문지
• /
• 제4권3호
• /
• pp.342-348
• /
• 1998

A majority of industrial robots are controlled by a simple joint servo control of joint actuators. In this type of control, the performance of control is greatly influenced by the joint interaction torques including Coriolis and centrifugal forces, which act as disturbance torques to the control system. As the speed of the robot increases, the effect of this disturbance torque increases, and hence makes the high speed - high precision control more difficult to achieve. In this paper, the joint disturbance torque of robots is analyzed. The joint disturbance torque is defined using the coefficients of dynamic equation of motion, and for the case of a 2 DOF planar robot, the conditions for the minimum and maximum joint disturbance torques are identified, and the effect of link parameters and joint variables on the joint disturbance torque are examined. Then, a solution to the optimal path placement problem is propose that minimizes the joint disturbance torque during a straight line motion. The proposed method is illustrated using computer simulation. The proposed solution method can be applied to a class of robots that are controlled by independent joint servo control, which includes the vast majority of industrial robots.

• 제어로봇시스템학회논문지
• /
• 제9권10호
• /
• pp.755-767
• /
• 2003

This paper proposes a robust fault-tolerant control framework for robot manipulators to maintain the required performance and achieve task completion in the presence of both partial joint failures and complete joint failures and uncertainties. In the case of a complete joint failure or free-swinging joint failure causing the complete loss of torque on a joint, a fully-actuated robot manipulator can be viewed as an underactuated robot manipulator. To detect and identify a complete actuator failure, an on-line fault detection operation is also presented. The proposed fault-tolerant control system contains a robust adaptive controller overcoming partial joint failures based on robust adaptive control methodology, an on-line fault detector detecting and identifying complete joint failures, and a robust adaptive controller overcoming partial and complete joint failures, and so eventually it can face and overcome joint failures and uncertainties. Numerical simulations are conducted to validate the proposed robust fault-tolerant control scheme.

• 대한정형도수물리치료학회지
• /
• 제4권1호
• /
• pp.35-43
• /
• 1998

This study was introduce to Manual Mobilization of the Extremity Joints of Freddy M. Kaltenborn(1989). Much of Orthopedic Manipulative Therapy is devoted to the evaluation and treatment of joint and related soft tissue disorders and one of the primary treatment methods is mobilization. When examination reveals joint dysfunction, especially decreased range of motion, joint mobilization techniques are often utilized. Kaltenborn's joint mobilization techniques are performed as passive examination or treatment movements by the therapist. There are three basic joint play movements: (1) traction, (2) compression, and (3) translatoric gliding. The purpose of joint mobilization is to restore normal, painless joint function. Mechanically, the goal is to restore joint play and thus normalize roll-gliding which occurs during active movements.