• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.39-47
• /
• 2014

PURPOSES : This study aimed to analyze economic effect of recycled aggregate production on job-site airport pavement. METHODS : The validation of site recycling for waste concrete as economic efficiency is analyzed through the case study of site recycling at an O airport pavement construction. The break-even point for the cost of site recycling was estimated according to two different waste concrete processing methods such as job-site recycling and processing on commission (or plant). RESULTS : Job-site recycling cost decreases as the use rate of job-site recycled concrete aggregate increases, or the amount of concrete waste increases, but transporting distance decreases. It was shown in an O airport case that as the use rate of job-site recycled concrete aggregate exceeds 61.4 %, the job-site recycling cost is cheaper than the processing cost on commission. CONCLUSIONS : The results of this study can utilize basic data of feasibility for site recycling of waste concrete on airport pavement construction.

• 자원리싸이클링
• /
• 제18권3호
• /
• pp.20-26
• /
• 2009

본 연구는 순환잔골재를 사용한 콘크리트의 굳지 않은 콘크리트 특성을 파악하고 순환골재 콘크리트의 품질관리 방안을 제시하고자 하였다. 이를 위하여 순환굵은골재 및 순환잔골재의 치환율을 조합하여 설계압축강도 30MPa의 콘크리트를 제작하였으며, 공기량 및 슬럼프를 측정하였다. 측정된 공기량 및 슬럼프 경시변화를 통하여 순환잔골재의 재료적 특성이 콘크리트의 물성에 미치는 영향을 파악하였으며, 골재의 흡수율 차에 따른 품질성능 저하를 고려할 수 있도록 현장 도착 슬럼프를 기준으로 전체 배합수를 일정하게 유지하는 품질관리 방안을 제시하도록 하였다. 본 실험에서는 골재 종류(천연, 순환)에 따른 표면수 보정을 통해 1시간 후 현장도착 슬럼프가 일정하게 유지될 수 있도록 콘크리트를 배합하였다. 순환골재의 사용에 따른 압축강도의 저하는 나타나지 않았다. 또한 표면수 보정을 통한 전체 배합수의 관리를 통하여 순환골재 콘크리트의 품질관리가 가능할 것으로 판단된다.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.21-30
• /
• 2015

PURPOSES : The purpose of this study was to evaluate the performance of rapid-setting polymer-modified asphalt mixtures with a high reclaimed asphalt pavement (RAP) content. METHODS: A literature review revealed that emulsified asphalt is actively used for cold-recycled pavement. First, two types of rapid-setting polymer-modified asphalt emulsion were prepared for application to high-RAP material with no virgin material content. The quick-setting polymer-modified asphalt mixtures using two types of rapid-setting polymer-modified asphalt emulsion were subjected to the following tests: 1) Marshall stability test, 2) water immersion stability test and 3) indirect tensile strength ratio test. RESULTS AND CONCLUSIONS : Additional re-calibration of the RAP was needed for laboratory verification because the results of analyzing RAP aggregates, which were collected from different job sites, did not deviate from the normal range. The Marshall stability of each type of binder under dry conditions was good. However, the Type B mixtures with bio-additives performed better in the water immersion stability test. Moreover, the overall results of the indirect tensile strength test of RAP mixtures with Type B emulsions exceeded 0.7. Further research, consisting of lab testing and on-site application, will be performed to verify the possibility of using RAP for minimizing the closing of roadways.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.77-85
• /
• 2018

PURPOSES : The purpose of this study was to develop an urgent road-repair system and perform a field applicability test, as well as discover the optimum mix design for machine applications compared to the optimum mix design for lab applications. METHODS : According to reviews of the patent and developed equipment, self-propelled and mix-in-place equipment types are suitable for urgent pavement repair, e.g., potholes and cracks. The machine-application mix design was revised based on the optimum lab-test mix design, and the field application of a spray-injection system was performed on the job site. The mixture from the machine application and lab application was subjected to a wet-track abrasion test and a wheel-tracking test to calibrate the machine application. RESULTS and CONCLUSIONS : This study showed that the binder content could differ for the lab application and the machine application in the same setting. Based on the wet-track abrasion test result, the binder contents of the machine application exceeded the binder contents of the lab application by 1-1.5% on the same setting value. Moreover, the maximum dynamic stability value for the machine application showed 1% lower binder contents than the maximum lab-application value. Collectively, the results of the two different tests showed that the different sizes and operating methods of the machine and lab applications could affect the mix designs. Further studies will be performed to verify the bonding strength and monitor the field application.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.61-71
• /
• 2016

PURPOSES: The objective of this study was to determine the optimum ratio of mix design, for a reclaimed asphalt pavement (RAP) content of 100%, for spray injection application. METHODS: A literature review revealed that spray injection is an efficient and cost-effective application for fixing small defective regions of an asphalt pavement. Rapid-setting polymer-modified asphalt mixtures prepared from two types of rapid-setting polymer asphalt emulsion were subjected to Marshall stability and wet track abrasion tests, in order to identify the optimum mix designs. RESULTS and CONCLUSIONS : Different mix designs of type A and type B emulsions were prepared using RAP and virgin aggregates, in order to compare the performance and determine the optimum mix design. The performance of mixtures prepared with RAP was superior to that of mixtures containing virgin aggregates. Moreover, for optimum ratio of the design, the binder content prepared from RAP was set to 1~2% lower than that consisting of virgin aggregates. Compared to their Type A counterparts, type B mixtures consisting of a reactive emulsion performed better in the Marshall stability and wet track abrasion tests. The initial results confirmed the advantages associated with using RAP for spray injection applications. Further studies will be performed to verify the difference in the optimum mix design and performance obtained in the lab-scale test and tests conducted at the job site by using the spray injection machine.

• 자원리싸이클링
• /
• 제31권5호
• /
• pp.67-76
• /
• 2022

가구 산업은 부가가치 창출의 가능성이 높고 중소기업이 주축이 되어 있는 산업 특성상 일자리 창출 여력이 크다. 그러나, 최근 사용 후 가구의 처리 동향을 살펴보면 재사용 가치가 충분한 사용 후 가구마저도 파쇄되어 고형연료(SRF)로 활용되고 있는 사례가 많으며, 폐기물 처리업체는 지속적으로 감소하면서 폐목재 적체 현상으로 이어지고 있다. 이 같은 문제를 해결하기 위한 방안으로, 순환이용효율성이 높은 사용 후 가구 재제조 비즈니스 모델을 제안하고자 한다. 재제조는 자원 및 에너지 절감 효과가 크고, 고용창출 효과가 높다는 점에서 사용 후 가구에 적용 시 산업경제적 파급효과가 클 것으로 사료된다. 이에 본 연구에서는 해외의 사용 후 가구 재제조 과정을 분석하여 그 특성을 파악하고 이를 바탕으로 경제성 및 환경성 분석을 수행하였다. 경제성 분석 결과, 1인 사업장 기준으로 사용 후 가구 재제조를 통한 연간 예상수익은 약 104백만원, B/C 분석결과는 30으로 높은 사업성을 확보하는 것으로 나타났다. 이는 우리나라 1인 근로자 가구 연평균 소득의 3.11배(연평균 소득은 33백만원)에 달하는 수준이며, 같은 중량의 SRF로 재자원화할 경우의 수익 325천원보다 320배 높은 수준이다. 또한, 환경성 분석결과, 기존의 목재펠릿으로 가공하는 재자원화보다 재제조함으로써 얻을 수 있는 연간 온실가스 저감효과는 연간 2.2 tCO₂-eq.이며, 이는 소나무 937그루 또는 신갈나무 622그루가 연간 흡수하는 온실가스의 양과 유사한 수치이다. 이러한 연구결과는 폐기단계에서 경제적 환경적 효과를 고려한 재자원화 방법을 우선 적용하는 것이 중요함을 시사해준다.