• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.185-191
• /
• 2011

This research was described the prevention of coastal topographical change and sediment diffusive concentration incoming from small estuary after construction jetties. This structure is constructed to decrease sediment deposition incoming from the upstream river due to the urbanization and industrial development and to minimize effects on the coastal ecosystem. The physical modeling and numerical modeling for waves were conducted to analyze the configuration of Imrang sand beach deformation without and with construction of jetty. The specification of the installed jetty, which is able to control sedimentation concentration was decided based on the prediction of the Imrang beach area changes by space and time. As a result, the jetties constructed in the estuary retarded the rate of sand sediment, so that the effect area of sand sedimentation was obviously decreased. In addition, the measured field data indicated that the sediment deposition inside of dikes could be controlled and the right side area of jetties could be preserved without sediment deposition.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2004.08a
• /
• pp.233-242
• /
• 2004

• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.697-709
• /
• 1999

Two dimensional finite element model(RMA) is applied to examine sediment transport behavior near Buyeo water intake station of the Keum River. The simulation results of bed change with various discharge conditions agree with those of observation. As the alternatives of channel modification and resulting bed lowering near intake station, construction of jetties and removal of small island are considered. The station of jetties diverted the main stream toward the other side and the width of the main stream did not change so much. The bed elevation of the main channel is reduced about 5~20 cm, when flow condition of 12,030㎥/sec applied. The removal of small island provides the less significant effect on sediment movement. This study shows that the construction of jetties would be effective to reduce the entrainment of sediment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5B
• /
• pp.483-491
• /
• 2009

In this study, a jetty construction is taken into account for the reduction of sediment diffusive concentration incoming from the upstream river due to the urbanization and industrial development and to minimize the effects on the coastal ecosystems. The field observation and numerical calculation are conducted to analyze the diffusion zone of sediment concentration in the small estuary and coastal area. The specification of the installed jetty which is able to control the sediment concentration was decided based on the prediction of the dispersion area changes in space and time. The selected size and layout for the jetty design were examined for the dispersion zone by numerical calculation and field observation. As a result, the jetties constructed in the estuary retarded the dispersion rate of sediment concentration, so that the effect area of sediment dispersion was obviously decreased. In addition, the measured field data indicated that the sediment deposition in the inside of dikes could be controlled and the right side area of jetties could be preserved without influx sediment diffusion.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.345-354
• /
• 2007

A sedimentation analysis has been attempted to figure out sedimentation environment due to construction of coastal jetties, such as fish harbor dike, flow guided dike and jetty in shallow Kusipo area, in which tidal range marks up to 6.6 meters in spring tide. As an initial approach of understanding field measurement were done on several stations along reference lines with total station and photo analysis taken by remote controlled small air craft far one and half years. Also numerical tests were done by 2-D ADCIRC model considering dry-wet treatment to evaluate flow and bottom shear stress variations. According to direct measurement, deposition seems to be dominant on Kusipo beach. Model results show bottom shear stress lessens to $0.10{\sim}0.15\;N/m^2$ on most shadow zone of jetties and the inner zone is suffering sedimentation as a result of dike construction. However this is the first approach with limited analysis, thus it should be dealt further considering physical characteristics of bottom sediments in a complete sediment model on upcoming study.

• International Journal of Ocean System Engineering
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2012

The cross-shore sediment transport in a coastal region causes the important changes in beach morphological properties. The accurate estimation of the cross-shore sediment transport is important for the designing of the marine structures such as seawalls, jetties, breakwaters etc, and the preventing coastal erosion and accretion due to on-off shore sediment transportation. In this study, the experiments on cross- shore sediment transport carried out in a laboratory wave channel for initial beach slopes of 1/8, 1/10 and 1/15. Using the regular waves with different deep-water wave steepness generated by a pedal-type wave generator, the geometrical characteristics of beach profiles under storm conditions and the parameters affecting on-off shore sediment transport are investigated for the beach materials having medium diameters of $d_{50}$=0.25, 0.32, 0.45, 0.62 and 0.80 mm. The experimental results obtained from this study compared with previous experimental work and found to be of the same magnitude as the experimental measurements and followed the expected basic trend.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.1
• /
• pp.19-26
• /
• 1989

The quantification of phenomena presented by the shoreline changes and the prediction of future changes of shoreline are investigated by using a numerical model in this study. Shoreline has been sucessively affected by the activities of reclamation to maximize the land use and it also has been changed with cycles of accumulation and erosion of deposits. Many researches were performed on the jetties constructed to protect facilities adjacent to the shore. However, few studies on a seawall of protecting the beach, being very important in terms of land use, were carried out. Therefore, this study is to analyze effects of a straight seawall to shoreline changes.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.243-252
• /
• 2008

The Iho and Hamdeok beaches, the major coastal beaches in Jeju Island, have been studied through size analysis and using an experimental extension pole and sediment trap in beach profile, in order to understand their textural characteristics, migration patterns, and seasonal change in beach geometry. The Iho beach is composed of coarse and medium sands, 590 m in total length. The foreshore slope is 12.3$^{\circ}$ in summer and 10.8$^{\circ}$ in winter, which shows more steeper in summer. The Hamdeok beach consisting mostly of shell fragments is 950 m long, $5.7{\sim}7.4^{\circ}$ steep and 97.4${\sim}$114.5 m wide, respectively. The suspended load drift concentrations in the studied beaches showed 4.5 mg/l during the period of summer and 33.2 mg/l in winter, and those of fine-grained sediments are derived mostly from the marine of northeastward direction. The typical beach transformation of the Iho beach is resulting from the construction of jetties in the west side that built up the sand inside the jetties, whereas the erosion is occurring on the east side of beach. The center and berm sides of the sand in the Hamdeok beach drift into the dune side during the period of the stormy winter season.

• New & Renewable Energy
• /
• v.8 no.2
• /
• pp.6-13
• /
• 2012

Due to global warming, the need to secure an alternative resource has become more important nationally. Having very strong current on the west coast with up to 10 m tidal range, there are many suitable site for the application of TCP (Tidal Current Power) in Korea. On the south west regions between many islands that create strong current in the narrow channels. The rotor is one of the essential components which can convert tidal current energy into rotational energy to generate electricity. The design optimization of rotor is very important to maximize the power production. The performance of rotor can be determined by various parameters including number of blades, shape, sectional size, diameters and etc. This paper introduces the multi-layer vertical axis tidal current power system which can be applied to offshore jetties and piers effectively. Various cases of VAT turbine were designed. Specifically, the number of blades and turbine shape are changed in several cases. Also, performance analysis was carried out by CFD.

• Journal of the Korean earth science society
• /
• v.32 no.3
• /
• pp.265-275
• /
• 2011

The Hamo and Hyeopjae beaches in the western part of Jeju Island were studied in terms of seasonal variations of surface sediment and beach profile. Seasonal drift direction of the beach sands also was investigated. The Hamo beach of $7.3^{\circ}-10.8^{\circ}$ steep is composed of medium sand containing volcanic clasts and shell fragments. The Hyeopjae beach of $2.8^{\circ}-6.5^{\circ}$ steep is composed of coarse shelly sand. Hamo beach deformation is probably caused by the jetties constructed in the western part of the beach. In the Hyeopjae beach, surface sands were drifted into the dune side by the northwestern stormy wind during winter season.