• Advances in environmental research
• /
• 제7권1호
• /
• pp.1-11
• /
• 2018

Textile factories are one of the industries which its wastewater treatment is a challenging issue, especially in developing countries and a conventional treatment cannot treat all its pollutants properly. Using chemical coagulants is a technique for physical and chemical primary treatment of the wastewater. We applied jar test for selection of suitable coagulant among the five coagulants including alum, calcium hydroxide, ferrous sulfate, ferrous chloride and barium chloride for the effluent of wastewater in Mazandran textile factory located in Mazandran Province, Iran. In addition, jar test, we also used analytic hierarchy process (AHP) method considering criteria which included coagulation cost, sensitivity to pH change, the amount of sludge generation and side effects for coagulation. The results of the jar test indicated that calcium hydroxide was proper among the coagulants which it removed 92.9% total suspended solid (TSS), 70% dye and 30% chemical oxygen demand. The AHP analysis presented that calcium hydroxide is more suitable than other coagulants considering five criteria.

• 상하수도학회지
• /
• 제7권2호
• /
• pp.39-46
• /
• 1993

In this experimental study, it is concerned to develop a simple equation using jar-test results in order to predict the optimum dosage of coagulant, PAC(polyaluminum chloride). Considering the relationships with the reactions of coagulation and flocculation, the four independent variables (e.g. turbidity, temperature, pH and alkalinity) are selected out of many parameters and they are put into calculations to develop an equation by means of multi-regression method. As the result, the dosing rate of PAC is proportional to turbidity, pH and alkalinity, but in inverse to temperature. And the developed equation is as follow, $$D_c=\frac{3.2{\cdot}T^{0.37}{\cdot}A^{0.04}{\cdot}P^{0.5}}{t^{0.1}},\;(R^2=0.9443)$$ And also, comparing between the estimated value from the equation and the real dosing rate in the plant, Kwangam and Tdukdo, during 1988~1991, it is represented an agreement having a relative error of 16.4%, 17.8%, respectively.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.278-283
• /
• 2005

Generally Jar-Test is available to determine the coagulant dosage rate. Disadventages associated with Jar-Test are that regular samples have to be taken requiring manual intervention and the limitation to feedback control. To deal with this difficulty, determined optimized dosage rates of coagulant to investigates the union operation method of the statistical equation which uses the multi-regression method and the SCD.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.275-281
• /
• 2004

Generally Jar-Test is available to determine the coagulant dosage rate. Disadventages associated with Jar-Test are that regular samples have to be taken requiring manual intervention and the limitation to feedback control. To deal with this difficulty, determined optimized dosage rates of coagulant to Investigates the union operation method of the statistical equation which uses the multi-regression method and the SCD.

• Journal of Acupuncture Research
• /
• 제25권1호
• /
• pp.121-130
• /
• 2008

Objectives : Cupping therapy is a stimulation therapy similar to acupuncture and moxibustion with effects that differ depending on the degree of stimulus. To make the strength of the skin objective in cupping therapy for this study, we measured negative pressure in the cupping jar and calculated the expansion rate of the skin. Subjects and Methods : In this study, we experimented with cupping therapy jars made for sale and used in clinics. We studied the pressure in the jars and the changes on the skin surface by measuring properties. We used commercial jars of four different volumes and diameters and tried to discover the properties on the size of the jar. Results : The results of experiment with the cupping therapy are as follows: 1. The lowest pressure in a jar was measured at $-600{\sim}610mmHg$, and the number of operating of vacuum pump for reaching lowest pressure was increased recording where the volume of the jar would be big, but the lowest pressure was not increased recording where the size of that would be big. 2. As the vacuum pump continued to operate, the pressure gradient in the jar got smaller which shows that the expansion rate of the skin was not linear. The pressure gradient shows different operational numbers on the vacuum pump near 0mmHg/operation unrelated to jar volume. 3. When negative pressure worked on the jar, air in the jar decreased. The percentage of air gradually reduced as the negative pressure acted in the jar. For example, the percentage of skin was 37-66% when the negative pressure, reatched -500mmHg. According to out results, different test areas generate different percentages of air in the jar, presumably related to skin elasticity. This phenomenon was most pronounced with the smallest jars. 4. At -500mmHg, the expansion rate of the skin was 1.57-1.9 on the abdomen, and $1.52{\sim}1.68$ on the back. The expansion rate of the skin appeared greater when the jar was relatively small, and it appeared smaller when the jar volume was relatively large relatively.

• 한국환경보건학회지
• /
• 제38권2호
• /
• pp.128-135
• /
• 2012

Objectives: This study was aimed at determining the optimum coagulation dosage in a high turbid kaolin water sample using streaming current detection (SCD) as an alternative to the jar test. Methods: SCD is able to optimize coagulant dosing by titration of negatively charged particles. Kaolin particles were used to mimic highly turbid water ranging from 50 to 600 NTU, and polyaluminum chloride (PAC, 17%) was applied as a titrant and coagulant. The coagulation consisted of rapid stirring (5 min at 140 rpm), reduced stirring (20 min at 70 rpm), and settling (60 min). To confirm the coagulation effect, a jar test was also compared with the SCD titration results. Results: SCD titration of kaolin water samples showed that the dose of PAC increased as the pH rose. However, supernatant turbidity less than 1 NTU after coagulation was not achieved for high turbid water by SCD titration. Instead, a conversion factor was used to calculate the optimum PAC dosage for high turbid water by correlating a jar test result with that from an SCD titration. Using this approach, we were able to successfully achieve less than 1 NTU in treated water. Conclusions: For high turbid water influent in a water treatment plant, particularly during summer, the application of SCD control by applying a conversion factor can be more useful than a jar test due to the rapid calculation of coagulation dosage. Also, the interpolation of converted PAC dose could successfully achieve turbidity in the treated water of less than 1 NTU. This result indicates that an SCD system can be effectively used in a water treatment plant even for high turbid water during the rainy season.

• 대한환경공학회지
• /
• 제22권7호
• /
• pp.1173-1182
• /
• 2000

지금까지 급속혼화는 정수처리 공정 중에서 매우 중요한 공정으로 인식되어 왔다. 특히, 응집제의 원수내 확산은 급속혼화 공정에 이어지는 flocculation이나 filtration 공정에 지대한 영향을 미치게 되므로 지금까지 많은 연구자들이 혼화장치의 개발이나 효율적인 혼화방식에 관해 연구를 해왔다. 그러나 선행 연구자들은 급속혼화에 있어서 중요한 변수로 응집제 주입량, pH, 임펠러의 회전속도, 그리고 G값만을 고려하였으나, 실제 응집제와 콜로이드입자와의 충돌기회에 지대한 영향을 미치는 급속혼화 공정상에서 발생되는 난류장을 간과하였다. 특히 급속혼화에서의 난류의 발생은 G값에 전적으로 의지하여 난류장의 평균값으로 혼화조내의 난류를 표현하여 왔으며, 혼화조의 형상에 따라 달라지는 난류장 해석은 연구가 미약한 실정이다. 이에 본 연구는 급속혼화에서 난류장 해석의 중요성을 인식하고 혼화조의 형상 변화에 따라 달라지는 난류장을 전산유체 프로그램을 통하여 해석하였다. 그리고 혼화조 형상을 달리하며 jar-test를 수행한 결과 배플이 없는 원형 jar의 경우가 배플이 장착된 원형 jar나 Hudson jar보다 응집제의 확산에 따른 탁도 제거효율이 좋은 것으로 나타났으며, 전산유체 프로그램을 이용하여 각각 모사한 결과 벽면효과나 사류지역의 발생 등으로 배플이 없는 원형 jar가 혼화에 효과적인 난류장이 분포되는 것으로 확인되었다. 이 결과를 통해 혼화조 형상이 응집제의 확산이나 난류장의 발생에 영향을 미치는 것으로 결론 내릴 수 있다.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.2321-2327
• /
• 2015

본 연구는 급격한 수질변화에 따른 현장 적용에 적합한 응집제를 선정하고, 응집제 별 최적 주입량을 찾기 위해 aluminium sulfate, poly aluminum chloride, poly aluminum silicate chloride를 이용하여 Jar-Test와 Pilot-Test의 검증으로 실험 하였다. 분석 항목은 탁도, TOC, pH로 제거율을 측정하였다. 실험 결과를 바탕으로 PASC의 경우 기존 응집제 인 Alum이나 PAC 보다 최적 주입량 (15 mg/L)이 상대적으로 적었으며, 제거율도 높게 나타남을 확인할 수 있었다. Jar-Test에서는 원수 탁도 3-20 NTU 범위에서 응집제(PASC)의 최적 주입량을 주입하였을 때, 탁도 제거율(80%)과 TOC 제거율(89%)이 가장 높았으며, Pilot-Test에서는 원수 탁도 3.6-27 NTU 범위에서 응집제 최적 주입량을 주입하였을 때 탁도 제거율(82%)과 TOC 제거율(88%)을 확인할 수 있었다. 따라서 본 연구 결과를 바탕으로 응집제의 제거 효과는 원수 탁도와 TOC가 높아질수록 상승하는 경향을 확인할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.644-651
• /
• 1997

In the water purification plant, chemicals are injected for quick purification of raw water. It is clear that the amount of chemicals intrinsically depends on water quality such as turbidity, temperature, pH and alkalinity. However, the process of chemical reaction to improve water quality (e.g., turbidity) by chemicals is not yet fully clarified nor quantified. The feedback signal in the process of coagulant dosage, which should be measured (through the sensor of the plant) to compute the appropriate amount of chemicals, is also not available. Most traditional methods focus on judging the conditions of purifying reaction and determine the amounts of chemicals through manual operation of field experts using Jar-test data. In this paper, a systematic control strategy is proposed to derive the optimum dosage of coagulant, PAC(Polymerized Aluminium Chloride), using Jar-test results. A neural network model is developed for coagulant dosing and purifying process by means of six input variables (turbidity, temperature, pH, alkalinity of raw water, PAC feed rate, turbidity in flocculation) and one output variable, while considering the relationships to the reaction of coagulation and flocculation. The model is utilized to derive the optimum coagulant dosage (in the sense of minimizing turbidity of water in flocculator). The ability of the proposed control scheme validated through the field test has proved to be of considerable practical value.

• 한국해양환경ㆍ에너지학회지
• /
• 제3권1호
• /
• pp.62-69
• /
• 2000

본 연구는 담수조류의 대량 번식에 따른 정수장의 여과막 박힘, 어류의 대량폐사 등 각종 피해를 최소화하기 위하여 응집제를 이용한 응집-여과공정을 녹조제거시스템에 적용하기 위한 것이다. 응집-여과 공정에서 최적의 응집상태를 결정하기 위하여 시료로는 낙동강 원수를 사용하였고 Jar test와 실험실용 반응기를 사용하여 알칼리도, 탁도, Chl-a, pH를 측정하였다. 응집시간, 응집제 주입량, 드럼필터 회전속도 그리고 Chl-a는 각각 5min, 5mg/l, 3rpm 그리고 90㎍/l의 조건에서 높은 조류제거율을 보였다. Alum을 사용하였을 때의 조류 및 탁도 평균제거율은 50～60%, 30～50%이었고, PAC는 Chl-a의 제거율이 Alum보다 약 20% 더 좋은 효율을 보였다.