• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.491-496
• /
• 2003

In sensitivity analysis, semi-analytical method(SAM) reveals severe inaccuracy problem when relatively large rigid body motions are identified for individual elements. Recently such errors of SAM resulted by the finite difference scheme have been improved by the separation of rigid body mode. But the eigenvalue should be obtained first before the sensitivity analysis is performed and it takes much time in the case that large system is considered. In the present study, by constructing a reduced one from the original system, iterative method combined with mode decomposition technique is proposed to compute reliable semi-analytical design sensitivities. The sensitivity analysis is performed by the eigenvector acquired from the reduced system. The error of SAM caused by difference scheme is alleviated by Von Neumann series approximation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.195-204
• /
• 2007

The cyclic redundancy check(CRC) code used to decide retransmission request in hybrid automatic repeat request(HRAQ) system can also be used to stop iterative decoding of turbo code if it is used as an error correcting code(ECC) of HARQ system. Thus a scheme to use CRC code for both iteration stop and repeat request in the HARQ system with turbo code based on the standard of cdma 2000 system is proposed in this paper. At first, the optimum CRC code which has the minimum length without performance degradation due to undetected errors is found. And the most appropriate turbo encoder structure is also suggested. As results, it is shown that at least 32-bit CRC code should be used and a turbo code with 3 constituent encoders is considered to be the most appropriate one.

• Journal of computational fluids engineering
• /
• v.18 no.3
• /
• pp.34-41
• /
• 2013

We develop a novel immersed boundary (IB) method based on implicit direct forcing scheme for incompressible flows. The proposed IB method is based on an iterative procedure for calculating the direct forcing coupled with the momentum equations in order to satisfy no-slip boundary conditions on IB surfaces. We perform simulations of two-dimensional flows over a circular cylinder for low and moderate Reynolds numbers. The present method shows that the errors for estimated velocities on IB surfaces are significantly reduced even for low Reynolds number with a fairly large time step while the previous methods based on direct forcing failed to provide no-slip boundary conditions on IB surfaces.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.233-234
• /
• 2006

In this paper, we propose a novel PAPR reduction scheme, which requires no change of a receiver structure or no additional information transmission. The approach we employed is clipping in the time and frequency domains within EVM, which is a suboptimal method with lower computational complexity compared to the optimal method. The simulation results demonstrated that the proposed method is more effective at lower modulation levels with larger constellation errors.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.7
• /
• pp.99-106
• /
• 1995

Frequency response functions are of great use in dynamic analysis of structural systems. The present paper proposes an efficient method for computation of the frequency rewponse functions of linear structural dynamic models with a sparse, non-proportional damping matrix. An exact condensation procedure is proposed which enables the present method to condense the matrices without resulting in any errors. Also, an iterative scheme is proposed to be able to avoid matrix inversion in computing frequency response matrix. The proposed method is illustrated through a numerical example.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.18-27
• /
• 2002

A hierarchical representation scheme for planar curves, MBO-tree, is proposed in this paper, which provides natural approximation and efficient localization. MBO-tree is based on the Douglas-Peucker algorithm (iterative end-point fit algorithm), but approximation errors that are stored with corresponding points in MBO-tree nodes and are used for abstraction measures are adjusted by force to eliminate unnatural approximation. The error adjusting is just making the approximation error of a node in a MBO-tree to be less than or equal to that of its parent. In point of localization, the bounding area of a curve is represented with a minimum bounding octangle (MBO), which can enclose the curve more compactly compared with those of other hierarchical schemes, such as the strip tree, the arc tree and the HAL tree. The MBO satisfies the hierarchical inclusion property that is useful for hierarchical geometrical operations, such as the point-inclusion test and the polygon intersection test. Through several experiments, we found that the proposed scheme was able to approximate more naturally and to localize more effectively.

• Geophysics and Geophysical Exploration
• /
• v.22 no.4
• /
• pp.225-238
• /
• 2019

Migration velocity analysis (MVA) for creating optimum depth-domain velocities in seismic imaging was applied to marine long-offset multi-channel data, and the effectiveness of the MVA approach was demonstrated by the combinations of conventional data processing procedures. The time-domain images generated by conventional time-processing scheme has been considered to be sufficient so far for the seismic stratigraphic interpretation. However, when the purpose of the seismic imaging moves to the hydrocarbon exploration, especially in the geologic modeling of the oil and gas play or lead area, drilling prognosis, in-place hydrocarbon volume estimation, the seismic images should be converted into depth domain or depth processing should be applied in the processing phase. CMP-based velocity analysis, which is mainly based on several approximations in the data domain, inherently contains errors and thus has high uncertainties. On the other hand, the MVA provides efficient and somewhat real-scale (in depth) images even if there are no logging data available. In this study, marine long-offset multi-channel seismic data were optimally processed in time domain to establish the most qualified dataset for the usage of the iterative MVA. Then, the depth-domain velocity profile was updated several times and the final velocity-in-depth was used for generating depth images (CRP gather and stack) and compared with the images obtained from the velocity-in-time. From the results, we were able to confirm the depth-domain results are more reasonable than the time-domain results. The spurious local minima, which can be occurred during the implementation of full waveform inversion, can be reduced when the result of MVA is used as an initial velocity model.