• Korean Chemical Engineering Research
• /
• 제59권1호
• /
• pp.21-34
• /
• 2021

본 연구에서는 Chitosan nanoparticles (CNPs) 와 Lactococcus lactis (L. lac.) 를 흡착제로 사용하여 phthalates의 흡착 실험을 진행하였다. CNPs는 Tripolyphospate (TPP)와의 가교 결합을 통하여 제조되었으며, 제조과정 중에 L. lac.의 도입을 통하여 L. lac.-CNPs를 제조하였다. 모든 흡착제는 Fourier transform infrared spectroscopy (FTIR)을 사용하여 특성을 측정하여 다양한 작용기의 존재를 확인하였다. Adsorption isotherm 과 adsorption kinetic 을 통하여 CNPs, L. lac. 및 L. lac.-CNPs 의 흡착 거동 및 메커니즘을 확인하였다. 모든 입자에 대하여 DBP 및 DEP 의 흡착 거동은 Langmuir adsorption isotherm model 보다는 Freundlich adsorption isotherm model 에 적합하였으며, 이는 입자의 표면이 이질적 (heterogeneous) 라는 것을 의미한다. 흡착 메커니즘은 Pseudo-1st-order model 보다는 Pseudo-2nd-order model 에 적합하였으며, 이는 DBP 및 DEP 의 흡착이 입자 표면의 다양한 작용기들에 의하여 물리적 흡착보다는 정전기적 인력과 수소 결합 등에 의한 화학적 흡착이 지배적임을 나타낸다. 최종적으로, 쉽고 빠른 방법으로 CNPs 및 L. lac-CNPs 의 제조가 가능하며, 유기성 오염 물질을 효과적으로 제거할 수 있는 저비용의 흡착제로서 사용할 수 있음을 확인하였다.

• 콘크리트학회논문집
• /
• 제29권4호
• /
• pp.389-397
• /
• 2017

시멘트내 $C_3A$상과 $C_4AF$상은 염소이온과 반응하여 프리델염을 생성한다. 프리델염은 구조체에서 염소를 포함하기 때문에 염소이온의 흡착에 매우 중요하다. 외부에서 염소이온이 침투하면, 칼슘 알루미네이트 수화물은 염소이온을 고정하므로, $C_3A$상과 $C_4AF$상 및 AFm상의 염소 흡착 거동을 고찰하는 것은 고정화 현상을 이해하는데 매우 중요하다. 한편, 흡착 등온은 시멘트와 프리델염의 상호관계에서 정량적인 지식을 제공할 뿐만 아니라 그 상호관계의 특성을 이해하는데 매우 중요하다. 본 연구의 목적은 $C_3A$상, $C_4AF$상 및 AFm상의 염소이온 흡착 거동을 고찰하는데 있다. $C_3A$상과 $C_4AF$상의 흡착등온은 이론적 화학당량보다 다소 낮았으며 Langmuir 흡착등온식으로 표현할 수 있었다. AFm상의 흡착등온은 이론적 화학당량보다 매우 낮았으며, Freundlich 흡착등온식으로 표현하였다. 또한 흡착등온 모델에서 온도의 영향 매개변수를 실험범주내에서 온도의 함수로 제안하였다.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.384-392
• /
• 2017

Mango shell (MS) and mango shell activated carbon (MSAC) was used to adsorb crude oil from water at various experimental conditions. The MSAC was prepared by carbonization at $450^{\circ}C$ and chemical activation using strong $H_3PO_4$ acid. The adsorbents were characterized with Fourier Transform Infrared spectroscopy. Investigations carried out included the effects of parametric variations of different adsorbate dose, adsorbent dose, time, temperature, pH and mixing speed on the adsorption of crude oil. The equilibrium isotherm for the adsorption process was determined using Langmuir, Freundlich, Temkin and Dubinin Radushkevich isotherm models. Temkin isotherm was found to fit the equilibrium data reasonably well than others. The result demonstrated that MSAC was more effective for crude oil adsorption than raw mango shell. Optimum conditions were also presented. The enhanced effect from activation was justified statistically using Analysis of Variance and Bonferroni-Holm Posthoc significance test. The pseudo first order kinetics gave a better fit for crude oil adsorption with both MS and MSAC.

• 한국안전학회지
• /
• 제15권4호
• /
• pp.88-94
• /
• 2000

The adsorption characteristics of Tharonil on granular activated carbon were experimentally investigated in an adsorber and in a packed column. It was estabilished that the adsorption equilibrium of Tharonil on granular activated carbon was more successfully fitted by Freundlich isotherm equation than Langmuir isotherm equation in the concentration range from 1 to 1000 mg/1. Intraparticle diffusivities (pore and surface diffusivity) of Tharonil were estimated by the concentration-time curve and adsorption isotherm. The estimated values of pore diffusivity and surface diffusivity are $6.70{\times}10^{-6}$ and $2.0{\times}10^{-9}cm^2/s$, respectively. From comparison of intraparticle diffusivities, it was found that surface diffusion was the limiting step for adsorption rate. The break time and breakthrough curve predicted by constant pattern-linear driving force model were shown to agree with the experimental results.

• 상하수도학회지
• /
• 제26권3호
• /
• pp.431-442
• /
• 2012

The purpose of this study, is to separate magnetic separation devices using permanent magnets by using magnetization characteristics remaining in treated water after adsorption and synthesizing phosphorus adsorbent capable of magnetic separation for efficient removal of phosphorus. The synthesis of the adsorbent which set Zirconium(Zr) having high friendly features for phosphorus as an element, and by synthesizing Iron Oxide($Fe_3O_4$, another name of $Fe_3O_4$ is magnetite) being able to grant magnetism to Zirconium Sulfate($Zr(SO_4)_2$), zirconium magnetic adsorbent(ZM) were manufactured. In order to consider the phosphorus adsorption characteristics of adsorbent ZM, batch adsorption experiment was performed, and based on the results, pH effect, adsorption isotherm, adsorption kinetics, and magnetic separation have been explore. As the experiment result, adsorbent ZM showed a tendency that the adsorption number was decreased rapidly at pH 13; however, it was showed a high amount of phosphorus removal in other range and it showed the highest amount of phosphorus removal in pH 6 of neutral range. In addtion, the Langmuir adsorption isotherm model is matched well, and D-R adsorption isotherm model is ranged 14.43kJ/mol indicating ion exchange mechanism. The result shown adsorption kinetics match well to the Pseudo-second-order kinetic model. The adsorbent ZM's capablility of regenerating NaOH and $H_2SO_4$, was high selectivity on the phosphorus without impacts on the other anions. The results of applying the treated water after adsorption of phosphorus to the magnetic separation device by using permanent magnets, shows that capture of the adsorbent by the magnetization filter was perfect. And they show the possibility of utilization on the phosphorus removal in water.

• 한국환경보건학회지
• /
• 제24권3호
• /
• pp.41-47
• /
• 1998

The purpose of this research is evaluation of adsorption capacity of the cast for TCE comparing with the yellow clay. Furthermore, the experimental data was fitted with the Langmuir and Freundlich isotherm and was found to be apllicable to the adsorption isotherm equation. The soil bed reactor used in this study was made of glass(10 cm in diameter, 100 cm in depth). The cast and yellow clay used as adsorbents were screened with 8-20 mesh mecanically. Results from Equilibrium test with adsorbents showed that the equibrium time of the cast and yellow clay was 9min independent of the amount of the adsorbents. The adsorption efficiencys of the cast and yellow clay for TCE was 66.3% and 56.2%, respectively. In the application of Freundlich isotherm, 1/n of the cast and yellow clay were 0.786 and 0.704, respectively. These results showed that the cast was more available than the yellow clay as TCE adsorbent. The best adsorption capacity was showed at 0% moisture content, 70 ppm inlet concentration and 25$^{\circ}$C temperature.

• 한국결정성장학회지
• /
• 제11권6호
• /
• pp.264-268
• /
• 2001

표면계의 분배함수를 적절히 계산하여 유도하였다. 흡착등온식을 유도하였다. 유도된 흡작등온식의 분석을 통하여 표면상변이 현상은 흡착분자간에 강한 인력이 존재할 때 일어나는 것임을 보였다. 얻어진 이론적 결과는 실험 사실을 잘 설명한다는 것을 알수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제16권4호
• /
• pp.307-314
• /
• 2005

In this work, a static volumetric method was experimentally implemented to measure the adsorption isotherm of hydrogen and methane by the activated carbon. The equilibrium data of stationary phase and mobile phase were correlated into the Langmuir, Freundlich, Langmuir-Freundlich, and Toth isotherms, respectively. In addition, the comparison between prediction and experimental data was made. By a nonlinear regression analysis, the experimental parameters in the equilibrium isotherms were estimated and compared. Then, the linear and quadratic equations for pressure and temperature to adsorption amounts were expressed. The adsorption amounts were increased with the pressure increase and the temperature decrease.

• 한국재료학회지
• /
• 제23권8호
• /
• pp.462-468
• /
• 2013

We study and describe-from the point of view of the interactions of the adsorbed particles-three types of the adsorption isotherms, namely, Langmuir type adsorption isotherms, phase transition type adsorption isotherms, and adsorption limited type adsorption isotherms, which are observed by experiments. By introducing and using a one dimensional statistical occupancy model, we derived analytical adsorption isotherms for the no force, the attractive force, and the repulsive force exerted on the other adsorbed particles. Our derived adsorption isotherms qualitatively pretty well agree with the experimental results of the adsorption isotherms. To specify each adsorption type, Langmuir type adsorption is a phenomenon that occurs with no forces between the adsorbed particles, phase transition type adsorption is a phenomenon that occurs with the strong attractive forces between the adsorbed particles, and adsorption limited type adsorption is a phenomenon that occurs with the repulsive forces between the adsorbed particles. The theoretical analysis-only using fundamental thermodynamics and occupancy statistics though-qualitatively quite well explains the experimental results.

• 전기화학회지
• /
• 제9권1호
• /
• pp.19-28
• /
• 2006

The phase-shift method for determining the Langmuir, Frumkin, and Temkin adsorption isotherms ($\theta_H\;vs.\;E$) of H for the cathodic $H_2$ evolution reaction (HER) at a Pt/0.1 M KOH solution interface has been proposed and verified using cyclic voltammetric, differential pulse voltammetric, and electrochemical impedance techniques. At the Pt/0.1 M KOH solution interface, the Langmuir and Temkin adsorption isotherms ($\theta_H\;vs.\;E$), the equilibrium constants ($K_H=2.9X10^{-4}mol^{-1}$ for the Langmuir and $K_H=2.9X10^{-3}\exp(-4.6\theta_H)mol^{-1}$ for the Temkin adsorption isotherm), the interaction parameters (g=0 far the Langmuir and g=4.6 for the Temkin adsorption isotherm), the rate of change of the standard free energy of $\theta_H\;with\;\theta_H$ (r=11.4 kJ $mol^{-1}$ for g=4.6), and the standard free energies (${\Delta}G_{ads}^{\circ}=20.2kJ\;mol^{-1}$ for $k_H=2.9\times10^{-4}mol^{-1}$, i.e., the Langmuir adsorption isotherm, and $16.7<{\Delta}G_\theta^{\circ}<23.6kJ\;mol^{-1}$ for $K_H=2.9\times10^{-3}\exp(-4.6\theta_H)mol^{-1}$ and $0.2<\theta_H<0.8$, i.e., the Temkin adsorption isotherm) of H for the cathodic HER are determined using the phase-shift method. At intermediate values of $\theta_H$, i.e., $0.2<\theta_H<0.8$, the Temkin adsorption isotherm ($\theta_H\;vs.\;E$) corresponding to the Langmuir adsorption isotherm ($\theta_H\;vs.\;E$), and vice versa, is readily determined using the constant conversion factors. The phase-shift method and constant conversion factors are useful and effective for determining the Langmuir, Frumkin, and Temkin adsorption isotherms of intermediates for sequential reactions and related electrode kinetic and thermodynamic data at electrode catalyst interfaces.