• Membrane and Water Treatment
• /
• 제10권6호
• /
• pp.441-449
• /
• 2019

In this study, cellulose acetate (CA) / nylon66 (NYL66) (95/5) blend membranes with different thicknesses were prepared by a solvent evaporation method. The effects of membrane thickness (almost $7-25{\mu}m$), feed concentration (70-95 wt.% isopropanol), and feed temperature ($30-60^{\circ}C$) were investigated on the performance of membrane in the separation of isopropanol-water mixtures. With regard to the results of sorption experiments, it was found that the increase of feed temperature enhanced the overall sorption while by increasing feed concentration, the overall sorption passed through a maximum value at 70 wt. % isopropanol (IPA). The best separation factor 3080.51 was gained at high isopropanol concentration 95 wt.%, low feed temperature $30^{\circ}C$, and high membrane thickness $24.62{\mu}m$. Regarding the pervaporation separation index, the obtained results showed that proper values for the thickness of membrane, feed temperature, and isopropanol concentration in feed were $24.62{\mu}m$, $40^{\circ}C$, and 70 wt.%, respectively.

• Membrane and Water Treatment
• /
• 제10권5호
• /
• pp.353-360
• /
• 2019

ZSM-5 membrane was prepared on tubular macroporous ${\alpha}$-alumina support using a different synthesis route. The effects of organic template agent and Si/Al ratio of the synthesis gel on morphology, structure, and separation performance of the ZSM-5 membrane used for dehydration of isopropanol were investigated. High water perm-selectivity ZSM-5 membrane with a thickness of about $3.0{\mu}m$ and a low Si/Al ratio of 10.1 was successfully prepared from organotemplate-free synthesis gel with a molar composition of $SiO_2$ : $0.050Al_2O_3$ : $0.21Na_2O$ : NaF : $51.6H_2O$ at $175^{\circ}C$ for 24 h. The ZSM-5 membrane exhibited high pervaporation performance with a flux of $3.92kg/(m^2{\cdot}h)$ and corresponding separation factor of higher than 10,000 for dehydration of 90 wt.% isopropanol/water mixture at $75^{\circ}C$.

• Membrane and Water Treatment
• /
• 제8권5호
• /
• pp.483-498
• /
• 2017

Novel mixed matrix membranes of Sodium Alginate (NaAlg) were developed by the incorporation ofunmodified, modified Phosphomolybdic acid (PMA) then cross-linked with glutaraldehyde externally. These membranes were prepared by the solution casting technique. Pervaporation (PV) experiments have been performed with pure NaAlg, unmodified NaAlg-PMA5, NaAlg-PMA10, modified NaAlg-mPMA5, and NaAlg-mPMA10 (wt. % of PMA 5 and 10) at 30, 40 and $50^{\circ}C$, to separate water-isopropanol feed mixtures containing 10-30 wt. % of water. Pervaporation results of NaAlg-mPMA10 produced a highest separation factor of 9028 with a flux of $0.269kg/m^2.h$ for 10 wt. % of water containing feed mixture. Both separation factor and flux for water increased significantly with increasing content of mPMA into NaAlg; a significant improvement in PV performance was observed for NaAlg-mPMA5 and NaAlg-mPMA10 membranes when compared to pure NaAlg& PMA-5, PMA-10 membrane.

• Membrane and Water Treatment
• /
• 제7권2호
• /
• pp.143-154
• /
• 2016

Acetic acid can be removed from wastewater by esterification in a membrane reactor. Pervaporation membrane reactor (PVMR) is an alternative process to conventional separation processes. It is an environmentally friendly process. The main advantages of the PVMR are simultaneous water removal and production of an ester economically. In this study, the synthetic wastewater has been used. Esterification reaction of acetic acid with isopropanol has been studied in the presence of tungstosilicic acid hydrate as a catalyst in a batch reactor and in a PVMR. The effects of important operating parameters such as reaction temperature, initial molar ratio of isopropanol to acetic acid and catalyst concentration has been examined. Removal of acetic acid (conversion of acetic acid) was obtained as 85% using a PVMR by removal of water from the reaction mixture.

• 공업화학
• /
• 제10권2호
• /
• pp.319-323
• /
• 1999

비대칭 폴리에테르이미드막을 상전이 방법으로 제조하였고, 표면층 개질에서 NaOH 농도의 영향과 그에 따른 물/이소프로판올 혼합물 투과증발 분리에 대하여 연구하였다. 실험결과, 개질 용액의 농도가 증가할수록 폴리에테르이미드의 이미드 그룹이 가수분해에 의해서 쉽게 폴리아믹산 구조로 변하여 치밀층의 두께가 증가하였다. 따라서 사용된 NaOH 농도가 증가할수록 전반적인 투과도는 감소하였고, 선택도는 증가하였다. 그러나 NaOH 용액의 농도가 너무 높은 경우, 선택도가 오히려 감소하고 투과도는 증가되었다. 이러한 결과로부터, 비대칭 폴리에테르이미드막의 투과거동이 NaOH 농도에 크게 의존한다는 것을 알 수 있었다. 또한, NaOH로부터 개질된 막들의 투과증발 운전온도가 증가할수록 투과도와 선택도가 모두 증가되었다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2008년도 춘계 총회 및 학술발표회
• /
• pp.51-57
• /
• 2008

Mixed matrix membranes of poly(vinyl alcohol) (PVA), loaded with phosphomolybdic heteropolyacid (HPA) and crosslinked with glutaraldehyde have been prepared by the solution casting technique. Pervaporation (PV) experiments have been performed at $30^{\circ}C$ to separate water-isopropanol feed mixtures containing 10 to 40 wt.% of water. The membranes were characterized by DSC and DMTA to understand their thermal behavior and mechanical strength properties. At high content (i.e. 7 wt.% with respect to weight of PVA) of HPA, the mixed matrix membranes could extract water efficiently on the permeate side with a selectivity of 90,000 and a flux of 0.032 $kg/m^2h$ for 10 wt.% of water containing feed mixture (the lowest feed composition of water studied). Flux of the mixed matrix membranes decreased with increasing concentrations of HPA.

• 환경위생공학
• /
• 제14권4호
• /
• pp.35-40
• /
• 1999

For application of a yellow pigment as food additives, stability of a water-soluble yellow pigment from Bacillus sp. PY123 was investigated. The yellow pigment from Bacillus sp. PY123 was purified with pH treatment, activated carbon and silica gel column chromatography. The partial purified yellow pigment appeared only one spot on silica gel TLC after 12 evaporation and under irradiation of UV 253nm at dark room. Rf value of the pigment was measured at 0.04 and 0.12 with development of a solvent mixture (Butanol : Acetic acid : water = 4 :1:5) and a solvent mixture (Isopropanol : Ammonia : Water = 9 :1: 2), respectively, The partial purified pigment appeared a white fluorescence under UV365nm irradiation. The partial purified yellow pigment had a main peak and a minor peak on HPLC using 20mM phosphate buffer(pH 7.0) at 1ml/min flow rate. The partial purified pigment was stable at heat treatment, acidic pH, oxide-reductants and surfactants.

• Journal of Electrochemical Science and Technology
• /
• 제14권3호
• /
• pp.283-292
• /
• 2023

Currently, spray coating has attracted interest in the mass production of anode catalyst layers for proton exchange membrane water electrolysis (PEMWE). The solvent in the spray ink is a critical factor for the catalyst dispersion in ink, the microstructure of the catalyst layer, and the PEMWE performance. Herein, various pure organic solvents were examined as a substitute for conventional isopropanol-deionized water (IPA-DIW) mixture for ink solvent. Among the polar solvents that exhibited better IrO₂ dispersion over nonpolar solvents, 2-butanol (2-BuOH) was selected as a suitable candidate. The PEMWE single cells were fabricated using 2-BuOH at various ionomer contents, spray nozzle types, and drying temperatures, and their performance was compared to the cells fabricated using a conventional IPA-DIW mixture. The PEMWE single cells with 2-BuOH solvent showed good performances comparable to the conventional IPA-DIW mixture case and highly durable performances under accelerated degradation tests.

• Advances in nano research
• /
• 제13권2호
• /
• pp.187-197
• /
• 2022

The synthesis of organic and hybrid organic-inorganic perovskites directly from solution improves the cost- and energy-efficiency of processing. To date, numerous research efforts have been devoted to investigating the influence of the various solvent parameters for the synthesis of lead halide perovskites, focused on the effects of different single solvents on the efficiency of the resulting perovskites. In this work, we investigated the effect of solvent blends for the first time on the structure and phase of perovskites produced via the Lewis base vapor diffusion method to develop a new synthetic approach for water-stable CsPbBr₃ particles with nanometer-sized dimensions. Solvent blends prepared with DMF and water-miscible solvents with different Gutmann's donor numbers (D_N) affect the Pb ions differently, resulting in a variety of lead bromide species with various colors. The use of a DMF/isopropanol solvent mixture was found to induce the formation of the Ruddlesden-Popper perovskite based on lead bromide. This perovskite undergoes a blue color shift in the solvated state owing to the separation of nanoplatelets. In contrast, the replacement of isopropanol with DMSO, which has a high DN, induces the formation of spherical CsPbBr₃ perovskite nanoparticles that exhibit green emission. Finally, the integration of acetone in the solvent system leads to the formation of lead bromide complexes with a yellow-orange color and the perovskite CsPbBr₃.

• 공업화학
• /
• 제8권5호
• /
• pp.853-859
• /
• 1997

표면층에 치밀층 구배 구조를 갖는 비대칭 폴리에테르이미드막에 대하여 치밀 구조층의 화학적 개질을 통한 막 형태의 변화와 물/이소프로판올 혼합액의 투과증발 거동을 연구하였다. 치밀 정도는 증발 시간에 의해 조절되었고, 증발 시간이 0분에서 4분으로 증가되었을 때, 투과량은 감소하였고, 선택도는 증가하였다. 또한, 수산화나트륨 용액으로 개질 된 폴리에테르이미드막을 통한 투과증발 거동은, 치밀 표면층의 개질 시간이 증가될수록 선택성은 증가하였고, 투과량은 감소하였다. 전자현미경으로 확인된 형태 변화는 개질 시간의 증가에 따라 치밀 표면층의 density 증가를 보여주었고, 이러한 결과는 위의 관찰들과 일치하였다.