• Preventive Nutrition and Food Science
• /
• 제14권3호
• /
• pp.246-251
• /
• 2009

The partitioning behavior of five printing ink solvents was studied in cookie ingredients and cookies to examine migration behavior, and to determine if one could predict Kp of a cookie from summing the Kp of each ingredient multiplied by its weight factor in the cookie formula. Solvents were ethyl acetate, hexane, isopropanol, methyl ethyl ketone, and toluene. Gas chromatography was used to measure Kp values on each raw and baked ($260^{\circ}C$ for 10 min) cookie ingredients, and lab-made cookies. The baking process-decreases in water content in each sample generally affected Kp of polar solvents, but did not affect that of the non-polar solvents. Structural changes in cookie ingredients during the baking process also caused some change of migration behavior. While the prediction of Kp of lab-made cookies using the Kp of raw ingredients showed significant differences between calculated and experimentally found values, predictions with baked ingredients showed much smaller differences. This suggests that loss of water and changes of crystallinity in cookies and cookie ingredients due to the baking process are important and affect the Kp.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.732-734
• /
• 2003

A solvothermal synthetic method to $BaTiO_3$ nanoparticle has been investigated in toluene solution with $BaTi(OR)_6$ as precursor. A precursor prepared from barium metal with toluene, isopropanol and titanium isopropoxide was used as a starting material. Weight ratio of precursor to solvent prepared in the mixture are 5/100, 10/100, 20/100 and 50/100wt%. At the weight ratio of 50/100wt%, $BaTiO_3$ butterfly twin crystalline(${\fallingdotseq}100nm$) was obtained after synthesis at $250^{\circ}C$ for 20hrs in an autoclave. X-ray diffraction and transmission electron microscopy showed that the product of 50/100wt% has crystallization. At 5/100, 10/100, and 20/100wt%, however, red colloidal solution was obtained after synthesis and crystalline phase of $BaTiO_3$ was not produced.

• 대한화학회지
• /
• 제42권1호
• /
• pp.51-56
• /
• 1998

남조류 독성물질인 Microcystins은 자연계에 매우 미량 존재하기 때문에 이를 분리 및 정제하기가 쉽지 않다. 본 연구에서는 자연계에 존재하는 남조류 동결건조시료로부터 Microcystin RR과 LR을 분리 및 정제하는 새로운 방법을 개발하였다. 약 7.5g의 실리카겔을 정지상으로 사용하고 혼합용액인 ethyl acetate: iso-propanol:water(30: 45: 25)을 이동상으로 사용하는 open column system으로 시료를 전개한후 용액을 3mL간격으로 받아냈다. 받아낸 용액중의 Microcystin RR과 LR은 TLC와 HPLC(high performance Liquid Chromatography)를 이용하여 확인한 후 농축, 정제하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3535-3541
• /
• 2014

Bisphenol A is considered as pollutant, because it is toxic and hazardous to living organisms even at very low concentrations. Biological oxidation used for removing this organic from waste water is not suitable and consequently application of catalytic wet oxidation has been considered as one of the best options for treating bisphenol A. We have developed Fe/SBA-15, Ni/SBA-15 and Fe-Ni/SBA-15 as heterogeneous catalysts using the advanced impregnation method for oxidation of bisphenol A in water. The catalysts were characterized with physico-chemical characterization methods such as, powder X-ray diffraction (PXRD), FT-IR measurements, N2 adsorption-desorption isotherm, thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis. This work illustrates activity of the catalysts for heterogeneous catalytic degradation reaction revealed with excellent conversion and recyclability. The degradation products identified were not persistent pollutants. GC-MS analysis identified the products: 2,4-hexadienedioic acid, 2,4-pentadienic acid and isopropanol or acetic acid. The leachability study indicated that the catalysts release very little metals to water. Therefore, the possibility of water contamination through metal leaching was almost negligible.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.65-72
• /
• 2014

In this study, effects of alkali swelling at low concentration below 2 percent on properties of hardwood bleached kraft pulp (HwBKP) were elucidated. Swelling treatment of HwBKP was performed at various NaOH concentrations with/without beating. Then, the swelling characteristics of pulp fiber was evaluated by measuring the solvent retention values such as water retention value (WRV) and isopropyl alcohol retention value (LRV). It was found that fiber characteristics were influenced by NaOH swelling even at low alkali concentration and beating treatment as well. The values of WRV and LRV were decreased when the alkali concentration was increased. It is the result from the decreased acidic groups of pulp which were formed during beating. The acidic groups could be neutralized and then removed by alkali. The difference between WRV and LRV was decreased with increasing alkali concentration while the difference was increased when the alkali swollen pulp was beaten. In addition, the crystalline structure of HwBKP was almost not changed while the crystallinity was influenced by swelling treatment at a low alkali concentration.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.164-180
• /
• 2003

A series of cooperative interlaboratory tests (round robins) was conducted in 1997, 1998, 1999, 2000, 2001, 2002 and 2003 by the DIN 51834 Working Group on Tribological Tests in Translatory Oscillation Apparatus. The statistical analysis of these test results shows the influence of cleaning solvent, machine model and evaluation criteria on the tribological properties of the lubricants tested. Coefficients of friction and wear results are ranked according to the effects of ten different cleaning solvents, where isopropanol gave the lowest values and isoparaffin solvents the highest. The effect of machine model on coefficients of friction varied from about $0.2\%\;to\;0.9\%$ of the mean. Wear results were not affected. The tests also showed that the seizure criteria and methods of measuring wear required for in the test procedure do not provide a suitable measure of the tribological properties of some lubricants. The precision was Improved by introducing a grease apply caliper as well as an increased stroke to 1,5 mm and running-in. The temperature does not affect the precision of the oil test procedure.

• 한국작물학회지
• /
• 제46권4호
• /
• pp.279-283
• /
• 2001

The content and composition of tocopherol were analyzed in peanuts produced in Korea. The tocopherol assay was consisted of an extraction with n-hex-ane:isopropanol mixture followed by high pressure liquid chromatography with fluorescence detection. Tocopherol content was higher in leaves and seeds but lower in seed coats and shells. $\alpha$-/${\gamma}$- Tocopherol ratio was as low as 0.53 in seeds and as high as 22.5 in shells. Tocopherol content in seeds of nine varieties ranged from 142 to 220 ng/mg dry weight, and the $\alpha$-/${\gamma}$-tocopherol ratio from 0.40 to 0.75. Tocopherol content decreased by 18% but $\alpha$-/${\gamma}$-tocopherol ratio increased by 44% in roasted seeds. The results indicate that the level of tocopherol in Korean peanut varieties is moderate and the ratio of $\alpha$- to ${\gamma}$-tocopherol is low.

• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1150-1154
• /
• 2009

Low levels of virus contamination and naturally occurring reverse transcription-polymerase chain reaction (RT-PCR) inhibitors restrain virus detection in oysters. A rapid and efficient oyster-processing procedure that can be used for sensitive virus detection in oysters was developed. Poliovirus type 1 Sabin strain was used to evaluate the efficacy of virus recovery. The procedure included (a) acid-adsorption and elution with buffers (0.25M glycine-0.14 M NaCl, pH 7.5; 0.25M threonine-0.14M NaCl, pH 7.5); (b) polyethylene glycol (PEG) precipitation; (c) resuspension in Tween 80/Tris solution and chloroform extraction; (d) the second PEG precipitation; (e) viral RNA extraction with TRIzol and isopropanol precipitation; and (f) RT-PCR combined with semi-nested PCR. The overall recovery of elution/concentration was 19.5% with poliovirus. The whole procedure usually takes 19 hr. The overall detection sensitivity was 4 RT-PCR units of genogroup I norovirus (NoV) and 6.4 RT-PCR units of genogroup II Nov/25 g of oysters initially seeded. The virus-detecting method developed in this study should facilitate the detection of low levels of NoV in oysters.

• Food Science and Biotechnology
• /
• 제16권4호
• /
• pp.526-530
• /
• 2007

The objective of this study was to establish the optimum alcohol fermenting conditions for the processing of kiwi wine and vinegar products. Six yeast strains were examined for their alcohol production from kiwi at $30^{\circ}C$ for 72 hr with continuous shaking at 100 rpm. Under these conditions, Saccharomyces kluyveri DJ97 produced the highest alcohol content of 10.2%. As the fermentation time extended to 96 hr, the alcohol content reached a maximum of 12.75%. The optimum alcohol fermenting conditions for kiwi fruit were accomplished when kiwi was added to an equal amount of water, inoculated with S. kluyveri DJ97 and fermented at $30^{\circ}C$ for 96 hr with continuous shaking. The content of soluble solids decreased as the alcohol concentration increased, whereas little change was observed in the pH and titratable acidity during the low temperature aging process. Other alcoholic compounds, such as methanol, isopropanol, n-propanol, isobutanol, and isoamylalcohol, tended to increase as fermentation progressed.

• 한국태양에너지학회 논문집
• /
• 제33권5호
• /
• pp.24-33
• /
• 2013

Renewable energy industries, including sola cell plants, has been ever increasing ones for reducing fossil fuel consumption and strengthening national energy policy. In this paper we tried to identify occupational health hazards in solar cell-related industries operated in Korea. Poly silicon, silicon ingot and wafer, solar cell and module are major processes for producing solar cells. Poly silicon operations may cause hazards to workers from metal silicon, silanes, silicon, hydro fluoric acid and nitric acid. Solar cells could not be constructed without using metals such as aluminum and silver, acids such as hydrofluoric acid and nitric acid, bases such as sodium hydroxide and potassium hydroxide, and solvent and phosphorus chloride oxide. Workers in module assembly process may exposed to isopropanol, flux, solders that contain lead, tin and/or copper. To prevent occupational exposure to these hazards, it is essential to identify the hazards in each process and educate workers in industries with proper engineering and administrative control measures.