• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.259-264
• /
• 2016

In this study, we applied six different norbornene dialkyl esters as a plasticizer to an isoprene rubber (IR) and evaluated replaceability of DEHP which is an endocrine disruptor. IR test sheets were prepared by blending IR, norbornene dialkyl ester, vulcanizing agent, etc. and processing properties of the IR were evaluated by measuring Toque, scorch time, cure time and mooney viscosity. Mechanical properties of IR test sheet including hardness, tensile strength, 100% modulus and elongation were also measured and the physical properties of norbornene dialkyl ester applied as a plasticizer were compared to those using DEHN. Both the maximum and minimum toque for the norbornene dialkyl ester as a plasticizer were similar to those of using DEHP. In addition, the scorch and cure time of the former were slightly longer than those of the latter. The mooney viscosity for the case of DEHN was slightly lower than that of the latter. DEHN was also superior to DEHP in terms of processing. The hardness and thermal properties of all IR test sheets were measured to be similar to each other. The linear alkyl chain of norbornene compounds also exhibited good tensile characteristics.

• Elastomers and Composites
• /
• v.56 no.4
• /
• pp.223-233
• /
• 2021

In this study, epoxidized liquid isoprene rubber (E-LqIR) was used as a processing aid in a silica-filled natural rubber compound to improve the fuel efficiency, abrasion resistance, and oil migration problems of truck and bus radial tire tread. The wear resistance, fuel efficiency, and extraction resistance of the compound were evaluated according to the molecular weight of E-LqIR. Results of the evaluation showed that the E-LqIR compound had a lower chemical crosslink density than that of a treated distillate aromatic extract (TDAE) oil compound because of the sulfur consumption of E-LqIR. However, the filler-rubber interaction improved because of the reaction of E-LqIR with silica and crosslink with the base rubber by sulfur. As the molecular weight of E-LqIR increased, crosslink with sulfur was facilitated, and the filler-rubber interaction improved, resulting in improved abrasion resistance. The fuel efficiency performance of the E-LqIR compound was poorer than that of the TDAE oil compound because of the low chemical crosslink density and hysteresis loss at the free chain end of E-LqIR. However, the fuel efficiency performance improved as the molecular weight of E-LqIR increased.

• The Korean Journal of Rheology
• /
• v.4 no.1
• /
• pp.46-51
• /
• 1992

본 연구에서는 열가소성고무를 중심으로 한 스티렌 공중합체의 유변학적 특성을 Couette 보정치를 사용하여 해석하였다. 실험재료로는 SBS(Styrene-Butadiene-Styrene), SEBS(Styrene-Ethylene/Buthylene-Styrene), SIS(Styrene-Isoprene-Styrene)을 사용하였고 탄성체의 성격을 비교하기 위하여SBS(Styrene-Butadiene Rubber)와 IR(Isoprene Rubber)를 사용하였다, 실험결과 Couette 보정치는 온도가 증가할수록 감소하였다. 또한 열가소성 고부 (SBS, SEBS, SIS)의 보정치는 거의 비슷한 값을 나타내었으며 고무(IR, SBR)의 보정치는 열가소성고무에서보다 다소 높은 값을 나타내었다. 충진제를 첨가하였을 경우 충진제의 양 이 증가할수록 Couette 보정치는 감소하였다.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.326-333
• /
• 2003

Even though many studies have been reported about rubber vulcanization, it is still remained difficult to find a quantitative relationship between the final states of vulcanized rubber and initial formulation or processing conditions. Dynamic differential scanning calorimetry (DSC) method is known as a comparatively easy method to research for the rubber vulcanization in both experimental and analysis. In the present research, a study on the vulcanization reaction of NR/CB composites modified by isoprene(IR) and chloroprene(CR) rubbers is carried out using dynamic DSC method. Thermograms with several different heating rates were obtained and analyzed using the Kissinger method. Analysis showed that the vulcanization reaction was progressed through the first order reaction mechanism. In addition, the reaction temperature was severely influenced by the kinds or rubber modifiers, in this case, more influenced by CR than by IR. Those effects were clearly verified in the values of activation energy. Kinds of carbon blacks, however, could hardly influence on the reaction mechanism.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.199-204
• /
• 2020

Considering the immense applicability of isoprene rubbers, such as natural rubber (NR) and synthetic polyisoprene rubber (IR), attempts are being made to introduce more functionality within the rubber structure, e.g. epoxidation, to widen their technological viability. Epoxidation introduces polar epoxy bonds into the rubber molecular chain, resulting in enhanced intermolecular interactions among the rubber chains, increasing the oil resistance and air impermeability. Although there have been many reports on the epoxidation of NR in its latex form, there has been no such report using its solid form (or gum), which limits the epoxidation in terms of portability. Furthermore, the gum form has longer lifetime, while the latex form has limited lifetime for its efficient use. In this study, the epoxidation of natural rubber and polyisoprene rubber (using meta-chloroperoxybenzoic acid (mCPBA) as the epoxidizing agent) by dissolving their gum in hexane (i.e., the solution method) have been studied and compared. The effects of the amount of mCPBA, reaction time, and reaction temperature were investigated. The present process is easy and facilitates the epoxidation of rubbers in their solid form; therefore, it can be used for industrial upscaling of epoxidized rubber production.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.625-634
• /
• 2001

New polymeric photostabilizers containing hindered amine light stabilizer (HALS) were prepared by the reaction of liquid polyisoprene rubber grafted maleic anhydride (MAH) and 2,2,5,6-tetramethyl-4-piperidinol (TMPO). Their chemical composition and physical properties were characterized by titration, GPC and TGA analysis. The effects of polymeric HALS on the photooxidation of the styrene-butadiene rubber were studied from the UV, IR spectral changes, and photo-crosslinking was examined by the measurement of the insoluble fraction. The photooxidation of SBR upon irradiation was inhibited by addition of the new polymeric HALS. The extraction resistance of new polymeric photostabilizer was much better than that of the low molecular weight compound which is prepared by the reaction of MAH and TMPO. The new polymeric HALS ate fairly compatible with the SBR.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.235-242
• /
• 2003

A vulcanization reaction characteristics of an isoprene rubber (IR)-modified natural rubber/carbon black (NR/CB) composite was studied using in-situ electrical property measuring technique. Since the electrical conductivity of the sample composite would be changed continuously during the vulcanization reaction by rearranging of the carbon black particles within the sample, volume resistivity (${\rho}$) might be obtained as a function or reaction time. A stabilization time ($t_i$), maximum reaction speed time ($t_p$), and volume resistivity at that time(${\rho}_p$) were defined from the data for the Arrhenius analysis. Volume resistivity ${\rho}$ showed a comparatively high value of ${\sim}10^8$ order before the reaction started, and dramatically decreased to be stabilized within $1{\sim}2$ minutes as soon as the reaction started. As the more time elapsed, thereafter, ${\rho}$ decreased monotonously to a certain constant value through a peak, ${\rho}_p$ at time $t_p$, which was considered as the maximum reaction rate. As a result, while $t_i$ values were comparatively constant as $1{\sim}2$ minutes, $t_p$ values showed to become shorter and shorter as the reaction temperature.