• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.325-330
• /
• 2001

Shizhuyuan W-Mo-Bi-Ca $F_2$polymetallic ore is classified to the refractory one due to its complex property, fine dissemination and close association of minerals. Through several years of researches, in line with GY new mineral processing technology developed by Guangzhou Research Institute of Nonferrous Metals, in sulfide flotation circuit, an iso-flotability flowsheet is used to replace original overall bulk flotation flowsheet, and in tungsten flotation circuit, a new chelating type-GY reagent and a special pulp-conditioning system and a new technology of wolframite slime flotation are used to replace the traditional "Caustic Soda Method"$_{［1］}$, the metallurgical performance is greatly improved. Besides, GY New Method has created a favorable condition for comprehensive recovery of fluoride from tungsten flotation tailings. Notable economic benefit has been achieved.d.

• Journal of KSNVE
• /
• v.10 no.1
• /
• pp.49-56
• /
• 2000

In this paper performance of the noise barrier which is 53 m long and 6m high, and is located between the high rise apartment and road, is studied by using experimental and analytic method. The insertion loss is measured by using the direct method in accordance with the ISO code, while theoretical prediction is based on Muradali and Fyfe's method (Applied Acoustics, Vol. 53, 49~75, 1998). In addition to the diffraction at the top of the barrier, the waves are reflected infinite times between the building and the barrier, which is equivalent to replacing the building by the infinite series of the image receiver points. In two-dimensional study, the prediction of the insertion loss results in significantly overestimated values compared with the measurement. However three-dimensional analysis shows reasonable agreements, where traffic noise is assumed as incoherent line source and the length of the source is larger than that of the barrier.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.1-16
• /
• 1996

This study was conducted at an automobile assembly line located in Kyonggi-do, Korea from January 16 to February 28, 1995. The purposes of this study were to assess worker exposures to hand-arm vibration and the performance of gloves for reduction of vibration. The exposure to vibration was measured using to the ISO 5349(1986) method. Vibration acceleration and frequency spectra for each tool were determined on-line replicating actual working conditions and analyzed together with exposure time for evaluating individual worker exposure. Eight pneumatic hand tools, 60 workers exposured to hand-arm vibration, and three pairs of gloves were involved in this study. Results are summarized as follows. 1. Dominant frequencies of vibration for all tools(n=8) measured in this study ranged from 250 Hz to 800 Hz. 2. There was no significant correleration between dominant frequencies and free running speed (p>0.05). 3. Total predicted exposure times of using impact, hammer type did not exceed 40 minutes, but metal finish task, using grinder and sander exceeded 40 minutes. Total exposure time affected significantly the frequency-weighted, 4 hr equivalent acceleration. 4. Predicted prevalence and observed exposure period data were compared in workers(n=60), according to ISO 5349. In this results, 23(50.0 %) and 24(48.07 %) persons exceeded the mean latency periods for vibration-induced white finger(VWF) at 10 % (n=46) and 50 % (n=52) standards, respectively. On the basis of ISO equation, mean latent periods for VWF were 3.23, 4.72 years at 10 %, 50 % standards, respectively. 5. Reduction of vibration by gloves was evaluated. Since impact pneumatic tools produced low frequency vibrations, conventional gloves did not provide any protection. Gloves A and C amplify somewhat the signal at frequency below 400 Hz; the attenuation increases progressively by frequency to reach 18 dB ($7.94{\times}10^{-6}m/s^2$) at 1,000 Hz, slightly worsening Glove B did not provide any protection and made the situation slightly worse. However, since they make the hands warm, the occurrence of vibration-induced white fingers may be reduced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.581-587
• /
• 2014

Intake silencers of high performance and with less pressure drop are developed for a household oxygen generator. First, the acoustic power of the target oxygen generator are experimentally evaluated according to ISO code. Then, the transmission loss of and the flow characteristics inside the existing intake silencer are predicted and analyzed. On a basis of these results, two intake silencers are proposed, which are designed to induce the swirling flow inside the intake silencer and thus to reduce the flow loss. The predicted TL and the pressure drop for these two new silencers are compared to the existing one, which shows that the proposed ones have higher TLs as well as less pressure drop. The reason for these improvements are explained by investigating the flow characteristics of the new silencers in detail.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.163-168
• /
• 2015

In this paper, 433/865MHz dual band antenna is proposed by using IFA structure of a PCB antenna, the performance was improved by changing of the space between the feed point and short strip, varying the gap between the radiator and the ground plane and adding the branch line in the proposed antenna. To confirm the characteristics of the antenna parameters, HFSS from ANSYS Inc. was used for the analysis. RFID frequency band of ISO-18000-7 is 433MHz and EU-RFID frequency band of ISO-18000-6 is from 865.5 to 867.5MHz. Each of the 433/865MHz bandwidth of the proposed antenna is 5.2MHz and 18.2MHz. The maximum 433MHz antenna gain is -5.74dBi, the maximum 865MHz antenna gain is -3.36dBi. The Jig size of the proposed antenna is $60{\times}44{\times}1mm$ and the size of the antenna area $44{\times}21mm$. The results proved the possibility of the practical use on 433/865MHz by using the IFA structure that came from comparing and analyzing the measured and simulated data of the antenna.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.5
• /
• pp.373-382
• /
• 2016

Painting or thermally sprayed metal coating is often used in corrosion protection of steel structures. In recently, duplex coating system which combines thermally sprayed metals with paint is selected as a new generic type of coatings on steel structures under the highly corrosive environments. In this study, the structural steel specimens were surface treated, thermally sprayed with zinc, zinc-15%aluminum alloy, aluminum and aluminum-5%magnesium alloy, and finally sealing or painted with acrylic urethane. And as a reference specimens, steel specimens were painted with acrylic urethane after surface treatment. Circular defects with 1.0, 3.0 and 5.0 mm in diameters and line defect with 2.0 mm width, which reach the steel substrate were created on all specimens. The specimens were exposed into an environmental testing chamber controlled by the ISO 20340, which is a laboratory cyclic accelerated exposure test condition of spraying/UV/low temperature, for up to 175 days. Based on the corrosion tests, corrosion deterioration from the initial defects were evaluated and weathering performance of the specimens are compared.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.9
• /
• pp.1318-1323
• /
• 2008

Corn distiller's dried grains with solubles (DDGS) is a completely new feed ingredient in the Korean feed market. There is an ever increasing need for the Korean feed industry to import and make the best of it as a high protein and high energy feed ingredient. A layer feeding trial was conducted for 10 weeks to investigate the effects of addition of light-colored DDGS to layer diets on laying performance, egg qualities and yolk fatty acid composition. Also, the economics of using DDGS in the Korean situation was analyzed. Nine hundred Hy-line Brown layers, 24 weeks of age, were employed in a feeding trial consisting of four dietary treatments (0, 10, 15, and 20% DDGS), and five replicates per treatment. All experimental diets were prepared as iso-protein (17%) and iso-calorie (TMEn 2,780 kcal/kg). The use of DDGS up to 20% in layer diets did not exert any influence on feed intake, laying rate, total egg mass, mean egg weight and feed conversion ratio (p>0.05). The color and breaking strength of eggshell, as well as the albumin height and Haugh unit were not affected by the addition of DDGS up to 20% in the diet. The yolk color was significantly increased by DDGS supplementation (p<0.05). As the DDGS level increased, the oleic acid content decreased, and the linoleic acid increased (p<0.05) in egg yolk. The degree of saturation of yolk fatty acids was not affected by DDGS supplementation. The inclusion of light-colored DDGS up to 20% in layer diets resulted in a decrease of feed cost per kg without any undesirable effect on laying performance. In conclusion, the light-colored DDGS (L* 56.65) could be used up to 20% in layer diets without any harmful effect on laying performance, and possibly provide economic benefits to the Korean poultry industry.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.1
• /
• pp.13-18
• /
• 2016

More than 80 percent of traffic accidents related with lane departure believed to be the result of crossing the lane due to either negligence or drowsiness of the driver. Lane-departure related accident in the highway usually involve high fatality. Even though LDWS is believed to prevent accident 25% and reduce fatalities by 15% respectively, its effectiveness in performance is yet to be confirmed in many aspects. In this study, the vehicle lateral locations relative to warning zone envelop (earliest and latest warning zone) defined in ISO standard, ECE and NHTSA regulations are compared with respect to various factors including delays, vehicle speed and vehicle heading angle with respect to the lane. Since LDWS is designed to be activated at the speed over 60 km/h, vehicle speed range for the study is set to be from 60 to 100 km/h. The vehicle heading angle (yaw angle) is set to be up to 5 degree away from the lane (abrupt lane change) considering standard for lane change test using double lane-change test specification. The TLC is calculated using factors like vehicle speed, yaw angle and reaction time. In addition, the effect of vehicle type and reaction time have been considered to assess LDWS safety.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.4
• /
• pp.39-42
• /
• 2016

A PFA lined ball valve, which is machined with fluorinated resin PFA to its inner part for improving corrosion resistance, non-stickness, heat-resistance, has been widely used to the chemical/pharmaceutical industries, the semiconductor/LCD manufacturing processes, etc. with the high purity chemicals as working fluid. EPA stated that 60% of all fugitive emissions come from the valve stem packing in a typical petroleum or chemical processing plant. They monitor regulated components for leaks and maintain seal performance at acceptable levels. Korean industrial standards only deals with the bubble test for in-line leakage of valves, which has the detectable leak rate of $10^{-4}$ [$mbar{\cdot}L{\cdot}s^{-1}$], therefore, it is not sufficient to check fugitive emissions. In this study, we conducted Helium leak detection from a PFA lined ball valve and evaluated fugitive emissions according to ISO 15848-1, which has the detectable leak rate of $10^{-9}$ [$mbar{\cdot}L{\cdot}s^{-1}$], for manufacturing the high-reliable PFA lined ball valves against fugitive emissions.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.18-22
• /
• 2007

The objective of this study was to develop and assess the performance of an aseptic system for liquid milk contained in plastic bottles, from a small-scale production standpoint. Commercial sterility tests conducted on the bottled milk were utilized in our assessments of the system, via the identification and monitoring of the principal points of the process. Four 150 L batches of milk with pH values of approximately 6.7 were heat-processed at between 137 and $143^{\circ}C$ for 10 see in a plate heat exchanger, and then aseptically transferred to 500 mL high-density polyethylene (HOPE) bottles, in an ISO class 7 clean room. The aseptic condition of the bottles was achieved via 10 see of rinsing with a mixture containing 0.5% peracetic acid and 0.8% hydrogen peroxide at $30^{\circ}C$, followed by another rinse with sterile water. Of the 4 batches processed, 2 were determined to exhibit commercial sterility, on the basis of the physical-chemical and microbiological criteria adopted. It was concluded that some adjustment of the processing line was required in order to achieve full commercial sterility for all processes. The aseptic system developed and assessed in this study was demonstrated to have great potential for the processing and transferring of milk into plastic bottles, from a small-scale production standpoint.