• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1316-1321
• /
• 1990

Molten steel level information of ladle is very important for process control in steelmaking process. At secondary refining process, measuring lance and snokel have to keep constant thier depth from molten steel surfaces. But, there is much slag on the molten steel surface. Besides, not only the thickness of slag is varied with refining condition, but also molten steel level is largely affected by firebrick errosion. Then, optical measuring method and/or by human eyes cannot detect true molten steel surface, but slag surface. This slag thickness is 300mm at maximum, then huge diameter eddy current sensor will be needed if that type sensor is applied. In addition to, cooling system is necessary because the molten steel and slag temperature is high. This is not practically. To solve this problem, immersion type levelmeter is developed. This sensor is made up from primary and secondary cylindrical coils. High frequency current is applied to primary coil. Electro-motive force from secondary coil is measured, which is varied with molten steel level. This complete set is installed within stainless steel long capsule and attached to top of lance. This sensor is immersed into molten steel bath of ladle or tundish with protection of expendable paper sleeve.

• 혜화의학회지
• /
• 제11권1호
• /
• pp.85-90
• /
• 2002

From June 1th to December 31th 2001, the study was carried out 285 person who came to the Daejon oriental hospital for the examination of CVA. The result was as follows : 1. Hyperlipidemia patient is 41%, 50's is the highest. 2. In the case of Hyperlipidemia patient, Taeyum type is 49%, Soyang type is 36% and Soyum type is 15%. but in the Control group Taeyum type is 36%, Soyang type is 44% and Soyum type is 20%. 3. In the case of Abnormal EKG, Hyperlipidemia group is 34%, Control group is 32%. 4. In the case of Liver disease, Hyperlipidemia group is 17%, Control group is 9%. 5. In the case of Diabet mellitus, Hyperlipidemia group is 30%, Control group is 7%. 6. In the case of Hypertension, Hyperlipidemia group is 50%, Control group is 42%.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.207-214
• /
• 1997

Strength experimental on mortar which use Quenched Blast-Furnace Slag as aggregate was carried our for a fundamental study of application possibility of Quenched Blast-Furnace Slag as aggregate. It gives the following results. The strength of mortar use Quenched Blast-Furnace Slag is decrease as substitution rate is higher. As W/C rate increase, the strength decrease, but the strength decrease of fine aggregate rate 1:3 is lower than 1:2. The relation with fine aggregate is that the amount of fine aggregate is inversely proportional to strength. Th relation with age is proportional to strength and strength rate of going is lower than general mortar in 28 age the change of strength proportionately with W/C rate is that as W/C rate increases, th strength is drop ; it shows that it has same tendency as general mortar sand or crushed sand, but while W/C rate increase the strength is as high as general mortar. The reason can be assumed that water content per unit needed to Quenched Blast-Furance Slag is more than in case of sand. In addition, the relation with substitution rate is that the strength is the strongest at substitution rate 25% and 50% ; that is , sometimes it is higher than mortar which use sand 100%. In addition, long age strength of mortar which use Quenched Blast-Furnace Slag as aggregate is about to be studied in the last.

• 한국안전학회지
• /
• 제5권1호
• /
• pp.57-66
• /
• 1990

The purpose of this study is to investigate electrostatic charge condition and possibility of electrostatic hazards in case of putting on synthetic smocks and antistatic garments for the purpose of prevention of electrostatic hazards due to a human body electrical charge. It is shown in case of a synthetic smocks, electrostatic voltage by friction is about 2,900 (V), half life period is 12 second, and electrostatic charge is 1.4―1.8 ($\mu$ C). When putting on a synthetic smocks, electrostatic voltage is 2,500―2,800(V). When putting on a jumper of chemical fiber, electrostatic voltage is 8,000(V) . It is, therfore, possible to cause a electrostatic hazards. It is also shown in case of a antistatic garments, electrostatic voltage by friction is 87(V) ―280(V) (washing 90 times), half life period is 3―5 second, and electrostatic charge is 0.24―0.28($\mu$ C) which is much lower than 0.6($\mu$ C) limitation of fire and explosion occurance. When putting on a antistatic garments, electrostatic voltage is 10(V) ―125(V). In conclusion, it is shown when putting on a antistatic garments it is possible to prevent a electrostatic hazards such as fire or explosion due to human body, to prevent a destruction of semiconductor elements and capacity decline, and to prevent a misoperation of automation facilities and semiconductor electric and electronic products.

• KIEAE Journal
• /
• 제12권1호
• /
• pp.105-112
• /
• 2012

When a building is planned and designed, the design should be able to minimize the cost during the whole life cycle of the building. This study has begun to analyze LCC about the alternative design which is applicable to renewable energy facility construction. It is reviewed domestic and foreign papers about the trend of LCC technology and it is determined the analytical method to analyze the LCC of renewable energy. Regarding the review of alternatives, it is chosen the three alternatives which are able to designed combing the renewable energy facilities and it is performed the LCC analysis about each alternative. Alternative 1 is Photovoltaic + Solar Thermal + Photovoltaic /Wind Power, Alternative 2 is Geothermal + Photovoltaic, and Alternative 3 is Photovoltaic + Solar Thermal. The LCC analysis is present value method, its analytical period is 40 years and it is applied 3.2% of real discount rate. As a result, it is proved that Alternative 1 and Alternative 3 are not able to collectible the early investment cost during the analytical period and Alternative 2 is analyzed that its pay-back period of early investment cost is about 31 years. As the final outcome of this study on case analysis, it is more advantageous to use the combination of Geothermal and Photovoltaic energy than to use the other combination in LCC aspect.

• 디지털산업정보학회논문지
• /
• 제10권1호
• /
• pp.113-120
• /
• 2014

In this paper, I present a new echo canceller using the adaptive cascade system identification (CSI) method, which a system response is divided into several responses so that each response is adaptively estimated and combined. Echo cancellation is required for a dual-duplex DSL, in order to allow each individual loop to operate in a full duplex fashion. Echo cancellation was one of the most difficult aspects of DSL design, requiring high linearity and total echo return loss in excess of 70 dB. Especially, for a fickle response, if the response is estimated by an adaptive filter, the filter needs more taps and the performance is decreased. But the response is divided into several responses, the computation complexities are decreased and the performance is increased. For the stage constant n, which represents the number of stages, if the response is not divided (n=1), the computation complexity of multiply is $2N^2$. And if the response is divided into two responses (n=2), the computation complexity of multiply is $2N^2$. Also, if n=3, the computation complexity is ${\frac{2}{3}}N^2$. Therefore, it is known that the computation complexity is decreased as n is increased. Finally, this proposed method is verified through simulation of echo canceller for digital subscriber line (DSL) application.

• 산업기술연구
• /
• 제18권
• /
• pp.187-193
• /
• 1998

In this study, about the fatigue life of welded structure material under fluctuation loading, the prediction life which is produced by using the Histogram Recorder System was compared with the experimental life which is produced by the RMC model which is imported by conception of equivalent stress. In this result, this is represented few difference by comparing prediction life which is produced by damage analysis depended on Miner's rule, by using the Histogram Recorder System, with experimental life which is produced by the RMC load model which is imported by conception of equivalent of stress, therefore fatigue life is easily predicted by using Histogram Recorder System, and result of prediction has equivalent accuracy with other method which is more complex than the Histogram Recorder System. Besides the damage which is produced by stress which is high thirty percentage rank in the stress range of damage inducing, is nearly equal to the damage which is induced the rest of seventy percentage, there fore we can see that damage accumulation which is induced few time overload which is effected welded structure material is great.

• Current Optics and Photonics
• /
• 제6권4호
• /
• pp.420-429
• /
• 2022

In this paper, the details and design process of an optical system for space target detection cameras are introduced. The whole system is divided into three structures. The first structure is a short-focus visible light system for rough detection in a large field of view. The field of view is 2°, the effective focal length is 1,125 mm, and the F-number is 3.83. The second structure is a telephoto visible light system for precise detection in a small field of view. The field of view is 1°, the effective focal length is 2,300 mm, and the F-number is 7.67. The third structure is an infrared light detection system. The field of view is 2°, the effective focal length is 390 mm, and the F-number is 1.3. The visible long-focus narrow field of view and visible short-focus wide field of view are switched through a turning mirror. Design results show that the modulation transfer functions of the three structures of the system are close to the diffraction limit. It can further be seen that the short-focus wide-field-of-view distortion is controlled within 0.1%, the long-focus narrow-field-of-view distortion within 0.5%, and the infrared subsystem distortion within 0.2%. The imaging effect is good and the purpose of the design is achieved.

• 대한한의학원전학회지
• /
• 제22권1호
• /
• pp.27-34
• /
• 2009

In "Maekyojeongmiron(脈要精微論)", Jangbu(臟腑) is assigned to Chon.Gwan.Cheok(寸關尺) in according to the position. Kidney[腎] is assigned to the backward area of Cheok. Abdominal cavity[腹中] is assigned to the middle area of Cheok. Hypochondrium[季脇] is assigned to the forward area of Cheok. Liver[肝] is assigned to the backward area of left Gwan. Diaphragm[鬲] is assigned to the forward area of left Gwan. Stomach[胃] is assigned to the backward area of right Gwan. Spleen[脾] is assigned to the forward area of right Gwan. Heart[心] is assigned to the backward area of left Chon. Central part of the chest[膻中] is assigned to the forward area of left Chon. Lung[肺] is assigned to the backward area of right Chon. Thoracic cavity[胸中] is assigned to the forward area of right Chon. This method of assignment is simple and useful in clinic.

• 복식문화연구
• /
• 제7권2호
• /
• pp.220-224
• /
• 1999

This study is concerned with the names of is sa mai(잇사매) and ham sa mai(함사매). Origins and meanings of these terms were traced and examined. Some significant findings can be summarized as follows : Korean word is sa mai(잇사매) was a compound word. Korean character is (잇) is derived from Chinese character i, and sa mai(사매) in Korean means sleeves 神 in Chinese character. The character ham in Ham sa mai(함사매) is its origin in Chinese : Korean character ham was Korean pronounciation of the Chinese character, han. ham sa mai is a compound word of ham(함) (Korean), (han ) (Chinese) and sa mai(사매) sleeves(Korean). Thus, first characters of is(잇) in is sa mai(잇사매) and ham(함) in ham sa mai(함사매) are originated from Chinese, where as the word sa mai in the end of is sa mai and ham sa mai is pure Korean. Both character i and ham(han, Chinese) in Chinese means a jaw. Thus, both is sa mai(잇사매) and ham sa mai(함사매) means “jawed sleeves”. That is long and wide round sleeves with narraw wrists.