• 제목/요약/키워드: is

검색결과 711,189건 처리시간 0.25초

형광등 Positive column에 대한 자장인가 효과 (Magnetic field effect on the positive column of fluorescent lamp)

  • 지철근;김창종
    • 전기의세계
    • /
    • 제31권3호
    • /
    • pp.197-203
    • /
    • 1982
  • The effects on the characteristics of 20-W fluorescent lamp were studied when applying magnetic field to its positive column. First, when the direction of the magnetic field is axial, i.e., along the lamp, if the magnitude of the field is stronger than the critical field, lamp voltage is increased, lamp current decreased, luminous flux increased, starting voltage decreased, as increasing the applied magnetic field. At the magnetic flux density is 130 gauss, luminous flux is increased to about 6 percents and starting voltage is increased to about 45 percents. Second, when the direction of the magnetic field is transverse to the lamp axis, as increasing the applied magnetic field, lamp voltage is increased, lamp current decreased, luminous flux increased and starting voltage is nearly constant, but the rates of increase or decrease of this case is different from those of the first. At the magnetic flux density is 300 gauss, luminous flux is increased about 45 percents. In both cases, electric power dissipated by lamps is the same as that of the lamp which magnetic field is not applied to.

  • PDF

농업용 비닐하우스의 온풍난방에 관한 기초적 연구 (Study on the Vinyl House Heating by Warm Air)

  • 조진구;이근후
    • 한국농공학회지
    • /
    • 제19권3호
    • /
    • pp.4483-4491
    • /
    • 1977
  • The results obtained are as follows; 1. The variation of the temperature in a vinyl house without heating system is similar to that of air temperature in a day. The difference of maximum temperature and minimum one in a day is 27$^{\circ}C$ which is two times greater than the daily difference of air temperature. 2. When the length of the duct is increased, the high temperature zone is built up in the direction of warm air discharge from the duct, and the low temperature zone is built up in the opposite direction of warm air discharge. But, in case of the duct length is short (0.05 L), the temperature distrubution in a vinyl house become uniform. It is concluded that the shorter length of the duct, the better the distribution of the temperature in a vinyl house is. 3. When the duct is installed at high position, the high temperature zone is built up in the upper zone of the vinyl house and the low temperature zone is built up in the lower zone. And when the position of the duct is low, the rate of temperature variation along the vertical direction become high, and the direct contact of warm air with the plant in the house is occured. It is concluded that the duct should be installed at the position of slightly higher than the plant height. 4. When the fuel consumption rate is fixed at the 101/hr, the lowest temperature warming rate in the vinyl house is 5$^{\circ}C$ without regard to the air temperature.

  • PDF

IS 조직혁신의 영향요인과 성과에 관한 연구 - IS 개발방법론을 혁신 대상으로 - (A Study on the Affecting Factors and Performance of IS Organizational Innovation - Use of the IS Development Methodology as an Object of Innovation -)

  • 장윤희
    • Asia pacific journal of information systems
    • /
    • 제12권3호
    • /
    • pp.135-167
    • /
    • 2002
  • This research focuses on the IS development methodology as an object of innovation in an IS organization. It has two main research objectives. It was intended to understand the critical affecting factors which have an effect on the processing of each level in the dynamic and evolving innovation process. There are two levels of innovation process: initiation and implementation. It was also intended to understand the performance of IS organizational innovation. We found three main results by the LISREL analysis. First, main factors affecting initiation level of innovation are innovative tendency of IS members, communication level of IS organization, existence of champion manager, IS performance gap, executive supporting to IS, and relative advantage of IS development methodology. At the implementation level, it was understood that the existence of champion manager, executive support, and relative advantage of IS development methodology were the main factors promoting to use the innovation, and the complexity of innovation was a negative factor adopting the usage of innovation. Second, the quality of the previous level in the gradual innovation activities gives very notable affection to the continuous next level. Finally, it was found that the qualitative performance like the documentation, collaborative team approach, IS developer's awareness and ability corresponding to their task and so on was improved due to the IS organizational innovation. This research provides the standard framework for the IS organizational innovation in a structural way. In the practical aspect, it may be used as the principle for introducing and using the IS development methodology.

鼻病의 外治法에 關한 文獻的 考察 (A Literature study on the external treatment of nose diseases)

  • 박상균;노석선
    • 한방안이비인후피부과학회지
    • /
    • 제10권1호
    • /
    • pp.139-158
    • /
    • 1997
  • A Literature study on the external treatment of nose diseases, the results are as follows; 1. Nose was called "Cheun-bin(天牝)", was outer orifice of the lung, was the gate of vital energe(氣), The main function of nose is divided three pacts. One is the respiration, another is the sense of smell, the other is the sounding consonance. 2. Nose is concerned with The Lung(肺), The Spleen(脾), The Heart(心), The Stomach(胃), The Large intestine(大腸), The Bladder(膀胱) in the organs, is concerned with Lung Meridean, Large intestine Meridean, Stomach Meridean, Heart Meridean, Spleen Meridean, Governor Vessel Meridean etc. 3. The method on the external treatment of nose diseases is classified with obstructive method, pouring method, blowing method, attaching method, plaster method, rubbing method, cleansing method, poulticing method. In frequency of practical use, Obstructive method is used 276 cases, Blowing method is used 123 cases, Attaching method is used 103 cases, Plaster method is used 76 cases. 4. In frequency of the medicinal works on the external treatment of nose diseases, Herba Asari(細辛) is used 134 cases, Pedicellus Melo(瓜 ) is used 85 cases, Radix Aconiti Praeparata(附子) is used 52 cases, Herba Agastachis(麝香) is used 51 cases, Semen Armeniacae Amarurn(杏仁) is used 44 cases etc. In frequency of a prescription on the external treatment of nose diseases, Tongcho-san(通草散) is used 9 cases, $Sesin-go{\cdot}Sinyi-go{\cdot}Changpo-san$ are used 8 cases, $Kwache-san{\cdot}Wungwhang-san$ are used 7 cases etc.

  • PDF

건설업의 산업재해 감소와 관련한 안전관리비용 절감에 관한 조사 연구 (A Survey on the Save of Cost for Safety Management by Reduction of Industrial Accidents in Construction Industry)

  • 이영섭
    • 한국안전학회지
    • /
    • 제11권1호
    • /
    • pp.99-107
    • /
    • 1996
  • This survey is to compare the the number of accidents which were occurred in 24 construction companies with the average accident in construction industry. The number of accidents in 24 companiesis is lower than the average accident, then it is classified "save", otherwise it is classified "loss". This survey is conducted to have top management be interested and invest for safety by recognizing that safety management could be profit for the company. The result of this survey is as follows : The total save amount in 1992 is 44,780mi11ion Won and average is 1,870mi11ion Won, with being 11, 200mi11ion Won by reduction amount of deaths and 33,580mi11ion Won by reduction amount of injuries. In 1993 the total is 33,330mi11ion Won and average is 1,390mi11ion Won, and in 1994 the total is 38, 720mi11ion Won and the average is 1,610mi11ion Won. This result is save amount of workmen's compensation insurance with excluding the indirect costs for accidents. The company which ranked the highest save amount is B Construction Company with being 15.1 billion Won and the next is A Construction Company during 3 years. The Company which ranked highest percentage of save amount to sales amount is Q Heavy industry with being 0.359% and the next is B Construction Company during 3 years.pany during 3 years.

  • PDF

SOME RESULTS ON PP AND PF-MODULES

  • KHAKSARI, AHMAD
    • 호남수학학술지
    • /
    • 제28권3호
    • /
    • pp.377-386
    • /
    • 2006
  • For a commutative ring with unity R, it is proved that R is a PF-ring if and only if the annihilator, $ann_R(a)$, for each $a{\in}R$ is a pure ideal in R. Also it is proved that the polynomial ring, R[x], is a PF-ring if and only if R is a PF-ring. Finally, we prove that M as an R-module is PF-module if and only if M[x] is a PF R[x]-module. Also M is a PP R-module if and only if M[x] is a PP R[x]-module.

  • PDF

갑기위남정(甲己爲南政) 여위북정설(餘爲北政說)에 관한 연구(硏究) (A Study on the Theory of JiaJi Years(甲己年) as a period of South Politics(南政) and the Rest Eight Years as a period of North Politics(北政))

  • 윤창열
    • 대한한의학원전학회지
    • /
    • 제29권1호
    • /
    • pp.65-76
    • /
    • 2016
  • Objectives : Generally, pulsation is influenced by climate change in the realms of nature. However, there is a theory explaining a phenomenon in which the pulse gets weaker and even absent for no reason, without affected by diseases; this is the Theory of South and North Politics with which medical practitioners need to be familiar when taking the pulse of patients. Methods : The researcher considered all the previous annotations and the original text of SuWen (素問) ZhiZhenYaoDaLun(至眞要大論). Results : In Five Elements' Evolutions, JiaJi(甲己) becomes Tu(土), which turns itself into the king, an honorable duty. JiaJi is a period of South Politics because it looks south to give an order while the rest eight years is a period of North Politics because they are headed north to receive an order. Conclusions : Since South Politics years look south as a standard, Cun(寸) is located at the south and Chi(尺) is at the north. Controlling the Heaven energy(司天) is located at the south and Effecting the Earth energy(在泉) is at the north. Therefore, if Sanyin is Controlling the Heaven energy(三陰司天), the Cun pulse is absent; if Shaoyin is Controlling the Heaven energy(少陰司天), Cun pulses on both wrists are not felt; if Jueyin is Controlling the Heaven energy(厥陰司天), the Cun pulse on the right wrist disappears; if Taiyin is Controlling the Heaven energy(太陰司天), the Cun pulse on the left wrist is not felt. In the case of Chi, if Sanyin is Effecting the Earth energy(三陰在泉), the Chi pulse is absent; if Shaoyin is Effecting the Earth energy(少陰在泉), Chi pulses on both wrists are not felt; if Jueyin is Effecting the Earth energy(厥陰在泉), the Chi pulse on the right wrist disappears; if Taiyin is Effecting the Earth energy(太陰在泉), the Chi pulse on the left wrist is not felt. North Politics years appears conversely as compared with South Politics years.

동양의학(東洋醫學)의 생사론(生死論) 연구(硏究) (A study on the Discussion on Life and Death of Oriental Medicine)

  • 김인락;홍원식
    • 대한한의학원전학회지
    • /
    • 제3권
    • /
    • pp.1-150
    • /
    • 1989
  • Oriental medicine thinks life and death as the following. 1. The universe seems to be a kind of organism which is divided into 3 branches, as Heaven, Earth and Man. Man is not created from nihil by the Creator. Heaven and Earth by their interaction operate to produce man. This is similiar that zygote is not created from nihil, and that sperm and ovum are transformed into zygote by their interaction. The symbolic meaning of sperm is Heaven, and that of ovum is Earth. Mind and body, as well as spirit and body, are not the real, but artificial words for the purpose of observing and expressing one man. So there is not spiritual substance as distinct from body. The expected life span of man is subjected to change, and is always becoming through life. Fate, the Creator and the world to come cannot be said to be. 2. After one's death, man is transformend into Heaven and Earth. Dying is this process of transformation. Although man comes into existence and closes one's life, the total life of the universe does not change. The criteria of determination of death is not in cell death, but in somatic death. Somatic death divided into 2 branches, one is heart-lung death, the other is brain death. For the standard of health changes ceaselessly as time goes by, aging and dying is not the process of losing health. Because of mind cannot be seperated from body, we'll feel at ease bodily and mentally in healthy dying. The completion of lifetimes is the value of healthy dying. 3. From the viewpoint of these, we must think to let a person die healthily is the right medical ethics. The way to let a person die healthily is divided into 3 branches, one is treatment, another is prevention and the other is promotion of health. We should treat and prevent death of sickness, but take care of healthy dying.

  • PDF

ON INJECTIVITY AND P-INJECTIVITY, IV

  • Chi Ming, Roger Yue
    • 대한수학회보
    • /
    • 제40권2호
    • /
    • pp.223-234
    • /
    • 2003
  • This note contains the following results for a ring A : (1) A is simple Artinian if and only if A is a prime right YJ-injective, right and left V-ring with a maximal right annihilator ; (2) if A is a left quasi-duo ring with Jacobson radical J such that $_{A}$A/J is p-injective, then the ring A/J is strongly regular ; (3) A is von Neumann regular with non-zero socle if and only if A is a left p.p.ring containing a finitely generated p-injective maximal left ideal satisfying the following condition : if e is an idempotent in A, then eA is a minimal right ideal if and only if Ae is a minimal left ideal ; (4) If A is left non-singular, left YJ-injective such that each maximal left ideal of A is either injective or a two-sided ideal of A, then A is either left self-injective regular or strongly regular : (5) A is left continuous regular if and only if A is right p-injective such that for every cyclic left A-module M, $_{A}$M/Z(M) is projective. ((5) remains valid if 《continuous》 is replaced by 《self-injective》 and 《cyclic》 is replaced by 《finitely generated》. Finally, we have the following two equivalent properties for A to be von Neumann regula. : (a) A is left non-singular such that every finitely generated left ideal is the left annihilator of an element of A and every principal right ideal of A is the right annihilator of an element of A ; (b) Change 《left non-singular》 into 《right non-singular》in (a).(a).

Development of Sharpness Measuring Method for Glass Aggregate Particle made from Waste Glass Bottle

  • Sano, Shigeru;Yamada, Mari
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.76-79
    • /
    • 2001
  • In Japan in of today, there is no aspect in which the quantity of waste glass bottle discharged from ordinary homes decreases. Moreover, the kind of shape and color of the waste glass bottles are increasing little by little. In the recycling of the glass bottle, it becomes a problem that many kind of the color is abounding. It is possible to use the transparent glass bottle as raw material of the glassware. Since the reproduction of the color is difficult, the colored glass bottle is not possible to use as a raw material. Therefore, the processing of these glass bottles entirely depends on the reclamation. In Japan, the security of the new reclaimed land is very difficult for the reason of the environmental damage. Moreover, the life expectancy in many reclaimed lands is anticipated with within two years. Therefore, the development of the processing method of glass bottle other than reclamation becomes a rapid problem. At present it is examined that it is used of an aggregate of the colored pavement, as one of the application methods of colored glass bottle. The particle size of produced glass aggregate is also 5mm or less, because the thickness is 5mm or less on almost glass bottles. And almost glass particles have the sharp tip. The application as the aggregate is limited for this sharpness of the particle. This study was carried out for the purpose of the establishment of sharpness measuring method of the glass aggregate particle. It is possible that the injury degree to human in the handling is known, if showing the sharpness of the aggregate particle at the objective numerical value is possible. And the application of the glass aggregate is spread. In this research, the balloon fracture method was used for the sharpness measurement of the glass particle. This method is based on the completely new idea, and it is possible to express completely the possibility of injury to the human. It is reported with the detailed result in full paper, because this study is continuous in order to get the JIS which is industrial standard of Japan.

  • PDF