• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1992년도 제1차 학술발표초록집
• /
• pp.41-41
• /
• 1992

• Journal of Korean Neurosurgical Society
• /
• 제59권6호
• /
• pp.597-603
• /
• 2016

Introduction : Perioperative irradiation is often combined with spine tumor surgery. Radiation is known to be detrimental to healing process of bone fusion. We tried to investigate bone fusion rate in spine tumor surgery cases with perioperative radiation therapy (RT) and to analyze significant factors affecting successful bone fusion. Methods : Study cohort was 33 patients who underwent spinal tumor resection and bone graft surgery combined with perioperative RT. Their medical records and radiological data were analyzed retrospectively. The analyzed factors were surgical approach, location of bone graft (anterior vs. posterior), kind of graft (autologous graft vs. allograft), timing of RT (preoperative vs. postoperative), interval of RT from operation in cases of postoperative RT (within 1 month vs. after 1 month) radiation dose (above 38 Gy vs. below 38 Gy) and type of radiation therapy (conventional RT vs. stereotactic radiosurgery). The bone fusion was determined on computed tomography images. Result : Bone fusion was identified in 19 cases (57%). The only significant factors to affect bony fusion was the kind of graft (75% in autograft vs. 41 in allograft, p=0.049). Other factors proved to be insignificant relating to postoperative bone fusion. Regarding time interval of RT and operation in cases of postoperative RT, the time interval was not significant (p=0.101). Conclusion : Spinal fusion surgery which was combined with perioperative RT showed relatively low bone fusion rate (57%). For successful bone fusion, the selection of bone graft was the most important.

• 한국염색가공학회지
• /
• 제11권4호
• /
• pp.50-56
• /
• 1999

The adhesive properties of polyester cord in rubber matrix were investigated according to the surface modification. The polyester cord was oxidized in sodium hypochlorite solution, and graft-polymerized with acrylic acid under the irradiation with ultraviolet light, and then coated with resorcinol-formaldehyde latex (RFL). The modified surface was checked with scanning electron microscope. The adhesive properties were measured by the full-Out method, and evaluated with regard to the energy of adhesion and the maximum load. The polyester was not oxidized in sodium hypochlorite solution, so the surface was not able to etch to produce the coarse topology. As the concentration of acrylic acid and the reaction time were increased, the graft yields were also increased. It was considered that the acrylic acid would swell the polyester and diffuse easily to the inner side of substrate. The adhesive properties of polyeser to rubber matrix were affected by the surface condition. Namely, the maximum load was almost same, but the energy of adhesion was rather higher In the polyester grafted with acrylic acid than in control one. We concluded that the flexible aliphatic chains of polyacrylic acid situated in the interface of cord and rubber matrix were distributed well the stress and strain all over the filler resulting the high energy of adhesion.

• Macromolecular Research
• /
• 제17권5호
• /
• pp.301-306
• /
• 2009

This work has demonstrated that a novel amphiphilic poly(epichlorohydrine)-graft-polystyrene (PECH-g-PS) copolymer at 34:66 wt% was synthesized via atom transfer radical polymerization (ATRP) of styrene using PECH as a macroinitiator. The structure of the graft copolymer was characterized by nuclear magnetic resonance ($^1H$ NMR) and FTIR spectroscopy, demonstrating that the "grafting from" method using ATRP was successful. The self-assembled graft copolymer was used as a template film for the in-situ growth of silver nanoparticles from $AgCF_3SO_3$ precursor under UV irradiation. The in situ formation of silver nanoparticles with 6-8 nm in average size in the solid state template film was confirmed by transmission electron microscopy (TEM), UV-visible spectroscopy and wide angle X-ray scattering (WAXS). Differential scanning calorimetry (DSC) also displayed the selective incorporation and the in situ formation of silver nanoparticles within the hydrophilic PECH domains, probably due to stronger interaction of the silvers with the ether oxygens of PECH backbone than that with hydrophobic PS side chains.

• 폴리머
• /
• 제33권3호
• /
• pp.268-271
• /
• 2009

본 연구에서는 방사선 동시조사법에 의해 제조된 FEP-g-PSSA 막 단면을 SEM-EDX 기기로 분석하여 스티렌 술폰산 고분자(PSSA)의 막 내부로의 분포 경향을 연구하였다. 본 실험에서는 그래프트율, FEP 필름 두께, 선량률, 그래프팅 용매 등 여러 조사조건이 그래프트 고분자의 분포에 미치는 영향을 중점적으로 연구하였다. 실험 결과 균일하게 그래프트된 FEP-g-PSSA 막을 얻기 위해서는 필름 두께가 증가할수록 높은 그래프트율이 요구되어지고, 같은 조사 선량에서는 낮은 조사 선량률로 그래프트하는 것이 효과적임을 보여준다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권3호
• /
• pp.287-299
• /
• 1997

Procurement, cutting, cleansing, freezing, freeze-drying, and demineralization of the allogeneic bone must be made under the germ-free stable condition without bacterial and/or viral contamination. Even thought the bone is procured under the germ free condition, we must have confidence on disinfection of all the solutions that come in contact with tissue during the whole procedure. Lots of antibacterial agents have been introduced for chemical sterilization. Recently ethylene oxide gas sterilization or radiation sterilization is frequently selected as a secendary sterilization procedure. The biological and biochemical response of the graft material differs with the type and concentration of the sterilizing agents, and various toxic reactions have been reported due to the graft material itself and the substance released by the chemicals. The authors conducted the Millipore filter test to observe the toxic effect on L929 fibroblasts according to the effect on activity of succinate dehydrogenase, during the secondary sterilization of the demineralized allogeneic bone powder with irradiation or ethylene oxide gas. The result were as follows : 1. Around the copper disk, positive control group, 10mm diameter discoloration was observed. 2. As same as the negative control group, the disk showed no discoloration. 3. The demineralized allogeneic bone which was sterilized with ethylene oxide gas or irradiation showed no cytotoxicity. 4. From this results, it is suggested that treatment with ethylene oxide gas or irradiation should be effective to sterilize the deminineralized allogeneic bone.

• Archives of Plastic Surgery
• /
• 제41권2호
• /
• pp.158-162
• /
• 2014

Background Loss of nipple projection is a common problem following nipple reconstruction. The aim of this study was to demonstrate that the use of a tightly rolled dermal graft is effective in the long-term maintenance of nipple projection. Methods Nipple reconstruction was performed using the C-V flap technique. A dermal graft was harvested from the dog-ear portion of previous scars. The graft was rolled tightly into a compact cylinder and used to augment the nipple reconstruction. Postoperatively, stacked Allevyn dressing was used for protecting the nipple from compression for a minimum of two months. Nipple projection was measured at the time of surgery and at 12 months postoperatively. Results Forty nipple reconstructions were performed using this technique. There were 19 transverse rectus abdominis musculocutaneous (TRAM) flaps, 10 latissimus dorsi (LD) flaps, and 11 tissue-expanded breast mounds. At one year, the mean projection was 0.80 cm (range, 0.62-1.22 cm). The twelve-month average maintenance of nipple projection was 70.2% for the TRAM flap group, 76.3% for the LD flap group, and 61.8% for the tissue-expanded group. In two patients with previous irradiation of the reconstructed breasts, relatively poor maintenance of nipple projection was noted (45.7%). No complications were noted, and all of the donor sites healed well primarily. Conclusions Our results demonstrated that the use of a C-V flap with a tightly rolled dermal graft for nipple reconstruction improves the long-term maintenance of nipple projection. Its advantages include reproducibility, technical simplicity, cost-effectiveness, and minimal donor site morbidity.

• 한국염색가공학회지
• /
• 제15권3호
• /
• pp.154-160
• /
• 2003

Polypropylene nonwoven fabrics were grafted with acrylic acid by a preirradiation method by using electron beam accelerator. The effect of irradiation dose, storage time, concentration of acrylic acid, reaction temperature, reaction time and Mohr's salt concentration on the degree of grafting were investigated in detail. The grafted Polypropylene nonwoven fabrics were characterized using IR spectroscopy and SEM. The results showed that the degree of grafting increased with increasing absorbed dose and the Mohr's salt in the acrylic acid solution promoted grafting efficiency.

• 미생물학회지
• /
• 제52권2호
• /
• pp.140-147
• /
• 2016

동물유래성분을 원재료로 사용하는 의료기기는 원료물질 유래 바이러스가 오염될 가능성이 있기 때문에 생산과정 중 바이러스가 오염되지 않도록 하여야 한다. 또한 생산공정은 오염될 가능성이 있는 바이러스들을 불활화하거나 제거하는 공정을 포함하여야 한다. 본 연구를 통해 돼지유래 이종골을 원재료로 사용한 바이러스 안전성이 보증된 치과용 골이식재(THE Graft$^{(R)}$) 제조공정을 개발하였다. THE Graft$^{(R)}$ 제조공정은 30% 과산화수소수와 80% 에탄올을 각각 처리하여 지방을 제거하는 공정과 $1,300^{\circ}C$ 열처리 공정을 통해 콜라겐과 유기물을 제거하는 공정을 포함한다. 또한 최종적으로 생산된 hydroxyapatite 성분의 골이식재에 25 kGy의 감마선을 조사하여 감염성 위해인자를 불활화하는 공정을 포함한다. THE Graft$^{(R)}$의 형태학적 특성을 소유래 hydroxyapatite 성분의 골이식재인 Bio-Oss와 SEM과 TEM을 이용하여 비교한 결과 구조적 특성이 유사함을 확인하였다. $1,300^{\circ}C$ 열처리 공정과 25 kGy 감마선 조사 공정의 바이러스 불활화 효과를 평가하기 위해 transmissible gastroenteritis virus (TGEV), pseudorabies virus (PRV), porcine rotavirus (PRoV), porcine parvovirus (PPV)를 모델 바이러스로 선정하였다. $1,300^{\circ}C$ 열처리 공정에서 TGEV, PRV, PRoV, PPV 모두 검출한계 이하로 불활화되었으며, 바이러스 로그 감소 값은 각각 ${\geq}4.65$, ${\geq}5.81$, ${\geq}6.28$, ${\geq}5.21$이었다. 또한 감마선 조사 공정에서도 TGEV, PRV, PRoV, PPV 모두 검출한계 이하로 불활화되었으며, 바이러스 로그 감소 값은 각각 ${\geq}4.65$, ${\geq}5.87$, ${\geq}6.05$, ${\geq}4.89$이었다. 두 공정에서 TGEV, PRV, PRoV, PPV의 누적 바이러스 로그 감소 값은 각각 ${\geq}9.30$, ${\geq}11.68$, ${\geq}12.33$, ${\geq}10.10$이었다. 이상의 결과에 의하면, THE Graft$^{(R)}$ 제조공정은 바이러스 안전성 보증을 위한 충분한 바이러스 불활화 능력을 가지고 있는 것으로 판단된다.

• IMMUNE NETWORK
• /
• 제11권1호
• /
• pp.68-78
• /
• 2011

Background: Graft-versus-host disease (GVHD) is a huddle for success of hematopoietic stem cell transplantation. In this study, effects of irradiation dose on immune kinetics of GVHD were investigated using B6 ${\rightarrow}$ BALB.B system, a mouse model for GVHD after MHC-matched allogeneic transplantation. Methods: BALB.B mice were transplanted with bone marrow and spleen cells from C57BL/6 mice after irradiation with different doses. Leukocytes residing in the peripheral blood and target organs were collected periodically from the GVHD hosts for analysis of chimerism formation and immune kinetics along the GVHD development via flow cytometry. Myeloid cells were tested for production of IL-17 via flow cytometry. Results: Pre-conditioning of BALB.B hosts with 900 cGy and 400 cGy resulted in different chimerism of leukocytes from the blood and affected survival of GVHD hosts. Profiles of leukocytes infiltrating GVHD target organs, rather than profiles of peripheral blood leukocytes (PBLs), were significantly influenced by irradiation dose. Proportions of IL-17 producing cells in the infiltrating $Gr-1^+$ or $Mac-1^+$ cells were higher in the GVHD hosts with high does irradiation than those with low dose irradiation. Conclusion: Pre-conditioning dose affected tissue infiltration of leukocytes and cytokine production by myeloid cells in the target organs.