• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1284-1285
• /
• 2006

We reported a P/M soft magnetic material with core loss value of $W_{10/1k}=68W/kg$, which is lower than that of 0.35mm-thick laminated material, by using high purity gas-atomized iron powder. Lack of mechanical strength and high cost of powder production are significant issues for industrial use. In order to achieve both low core loss and high strength by using inexpencive powder, the improvement of powder shape and surface morphology and binder strength was conducted. As the result, the material based on water-atomized powder with 80 MPa of TRS and 108 W/kg of core loss (W10/1k) was achieved.

• 한국지구과학회지
• /
• 제25권1호
• /
• pp.48-51
• /
• 2004

The light element candidates such as S, O, Si, and K are discussed for the reasonable compositions in the earth's core since the available data show density difference from pure iron core. These candidates are favored by the some evidences such as depletion in the crust and mantle, and lower eutectic temperature of Fe-FeS melt for sulfur. FeO phase for oxygen, lighter mass than sulfur and solubility in metallic phases for silicon, and partitioning in Fe-FeS melt for potassium. However, other problems such as short experimental data, initial compositions of these elements, and oxidation state during the formation of the earth should be solved simultaneously to confirm these light elements.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 추계학술대회 논문집
• /
• pp.217-218
• /
• 2015

Two axial flux permanent magnet (AFPM) machines using soft magnetic composite (SMC) and lamination steel are studied. Generally stator cores of AFPM machines are manufactured using SMC because AFPM machines need 3 dimensional core structures. However, SMC cores have very disadvantages in magnetic properties. Especially permeability value is much lower than that of lamination steel, so magnetic field density is also lower. In terms of core losses, SMC cores have much larger loss values than lamination steel cores because SMC core can't be laminated. In this study, AFPM machine was designed using laminated steel, and iron losses in two machines using SMC and laminated steel were studied. Simulations were carried out by a commercial 3-D FEM tool.

• BMB Reports
• /
• 제29권5호
• /
• pp.411-416
• /
• 1996

In order to study the role of the protein shell in both iron uptake and iron core formation of ferritin, we constructed a deletion mutant of the ferritin gene and expressed the mutant gene in Escherichia coli, This mutant was obtained by introducing an amber mutation at position Pro-157 and a deletion of the 19 amino acid residues at the carboxy-terminus of the recombinant tadpole H-chain ferritin. The deleted amino acids correspond to E-helix forming the hydrophobic channel in the protein. E. coli harboring the plasmid pTHP157, which contains the deleted gene, was grown at $23^{\circ}C$ in the presence of 0.1 mM IPTG, and the induced protein appeared to be partly soluble. Nondenaturing polyacrylamide gel electrophoresis showed that the expressed mutant H-chains coassemble into holoprotein, suggesting that E-helix is not necessary for assembly of the subunits as reported for human H-chain ferritin. Its ability in iron core formation was proven in an Fe staining gel, the result disagreeing with the observation that the hydrophobic channel is necessary for iron core formation in human H-chain ferritin.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.60-68
• /
• 2013

The present research aims to develop aluminum disc brakes to replace existing cast iron disc brakes in automobiles. The foundation for developing an aluminum disc is laid by investigating the performance characteristics of existing cast iron disc brakes and comparing those characteristics with those of aluminum disc brakes. This study involves FEM thermal/structural analysis of disc materials and experimental tests using a brake dynamometer. The results of this study show that, aluminum discs have not only better thermal/mechanical properties than existing cast iron discs, including better heat, wear, and crack resistance, but also that aluminum discs. Weigh less than existing cast iron discs, which results in improved maneuverability. Aluminum discs will become a more essential part of automobiles as electric cars become the major means of transportation.

• Archives of Pharmacal Research
• /
• 제26권7호
• /
• pp.575-580
• /
• 2003

The present study was designed to develop a microencapsulated L-ascorbic acid and iron that could be used to fortify milk and to determine the sensory properties of milk fortified with microencapuslation. Coating material was medium-chain triacylglycerol (MCT), and selected core material was ferric ammonium sulfate and L-ascorbic acid. The highest efficiency of microencapsulation was 95.0% in the ratio of 15:1 as coating to core material. Ascorbic acid release was increased sharply up to 5 d storage as 6.5%. TBA value was the lowest when both capsulated iron and ascorbic acid were added during 12 d storage, compared with other treatments. In sensory analysis, most aspects were not significantly different between control and capsulated ascorbic acid fortified milk at 5 d storage. The present study indicated that the use of microencapsulated ascorbic acid with MCT is effective for fortifying milk. In addition, these results suggest that acceptable milk products can be prepared with microencapsulated ascorbic acid and iron.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.55-59
• /
• 1997

In general, Vector control of synchronous reluctance motor(SynRM) is performed under the assumptions that all the parameters are constant and magnetizing flux saturation and iron loss effect can be negligible. Under these assumptions, however, torque nonlinear characteristic can be a possible performance deterioration when precision torque control is needed and operating speed is high. This paper proposes the method, in the Synchronous Reluctance Motor (SynRM), which select appropriate stator d,q-axis currents that the influence of iron core loss on the developed torque can be minimized, and shows that the proposed method is comparable to the algorithm which compensates the iron core loss effect.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.191-193
• /
• 2008

This paper describes a compact Iron-cored Electronic Current Transformer(ECT) based on IEC 61850. The ECT developed in this study has the feature of designing the current transformer with a compact iron-core, compensating error due to the nonlinear characteristic of Iron-core, and applying IEC 61850 9-2 for sampled value(SMV). We verify the performance of the innovative product developed in the study in KERI and test the performance of digital communication in the lab.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.342_343
• /
• 2009

This paper describes a compact Iron-cored Electronic Current Transformer(ECT) based on IEC 61850 9-2. The ECT developed in this study has the feature of designing the current transformer with compact iron-core, compensating error due to the nonlinear characteristic of iron-core, and applying IEC 61850 9-2 for sampled value(SMV). We test the performance of the product developed in the study in KERI, KEPRI.

• 한국분말재료학회지
• /
• 제10권1호
• /
• pp.51-56
• /
• 2003

To investigate the effect of the parameters of the plasma arc discharge process on the particle formation and particle characteristics of the iron nano powder, the chamber pressure, input current and the hydrogen volume fraction in the powder synthesis atmosphere were changed. The particle size and phase structure of the synthesized iron powder were studied using the FE-SEM, FE-TEM and XRD. The synthesized iron powder particle had a core-shell structure composed of the crystalline $\alpha$-Fe in the core and the crystalline $Fe_3O_4$ in the shell. The powder generation rate and particle size mainly depended on the hydrogen volume fraction in the powder synthesis atmosphere. The particle size increased simultaneously with increasing the hydrogen volume fraction from 10% to 50%, and it ranged from about 45nm to 130 nm.