• Journal of Magnetics
• /
• 제17권2호
• /
• pp.83-85
• /
• 2012

Magnetic particles in a novel, wound-healing ointment were studied using M$\ddot{o}$ssbauer spectroscopy and VSM to estimate the stability of the properties of the magnetic particles. The isomer shifts of $Fe_3O_4(A)$ were found to be 0.49-0.56 mm/s relative to iron metal, this indicates that the iron ions in $Fe_3O_4(A)$ are $Fe^{3+}$. On the other hand, the isomer shifts of $Fe_3O_4(B)$ were found to be 0.91-1.13 mm/s relative to iron metal, this shows that the ion state of $Fe_3O_4(B)$ is a mixed state of $Fe^{2+}$ and $Fe^{3+}$. It is noted that this composition, as well as that of the initial pure component in the form of a highly dispersed fraction (${\sim}10\;{\AA}$), differs from the stoichiometric one. It was found that the area ratio of the M$\ddot{o}$ssbauer subspectra of $Fe_3O_4(A)$ / $Fe_3O_4(B)$ taken at 87 and 181 K linearly increased in comparison to the initial pure magnetic particles, but the rate of increase of the area ratio at 181 K was about two times that at 87 K. From the magnetic hyperfine field, despite their small size, the particles exhibit no superparamagnetism.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.95-99
• /
• 2011

$CaTi_{1-x}Fe_xO_3(0{\leq}x{\leq}0.4)$ solid solution photocatalysts were synthesized by iron doping during the conventional solid state reaction at $1100^{\circ}C$ for 5 h and characterized by ultraviolet-visible (UV-vis) absorption spectroscopy, X-ray diffraction, morphological analysis. We found that $CaTi_{1-x}Fe_xO_3$ samples not only absorb UV but also the visible light photons. This is because the Fe substitution at Ti-site in $CaTi_{1-x}Fe_xO_3$ lattice induces the band transition from Fe3d to the Fe3d + Ti3d hybrid orbital. The photocatalytic activity of Fe doped $CaTiO_3$ samples for hydrogen production under UV light irradiation decreased with the increase in the Fe concentration. There exists an optimized concentration of iron in $CaTiO_3$, which yields a maximum photocatalytic activity under visible light ($\lambda\geq420nm$) photons.

• 한국광물학회지
• /
• 제4권2호
• /
• pp.119-128
• /
• 1991

In the southern limb of the Hambaek geosyncline belt, large-scaled skarn deposits are developed in the Cambro-Ordovician sedimentary rocks of the Chosun Supergroup. They are the Sangdong tungsten deposit, Geodo iron-copper deposit, Yeonhwa I and II lead-zinc deposits, and Ulchin zinc-lead deposit, all of which are associated with various skarn minerals. Though different occurrences and paragenesis are found in different deposits, most skarn deposits always have skarns of garnet (andradite-grossular series) and clinopyroxene(heden-bergite-diopside series). Andradite and hedenbergite are Fe-dominant members, but show different oxidation states, that is, Fe3+ for andradite and Fe2+ for hedenbergite. According to iron chemistry and log([Fe/Al]gd/[Fe/Mg]cpx) derived from equilibrium reactions, the diopside-andradite and hedenbergite-grossular pairs suggest the oxidized state (dian type) and reduced state (hegro type), respectively. Among skarn deposits developed in the Hambaek geosynline, it can be classified that the Geodo and Yeonhwa I skarns are of dian type, while the Sangdong, Yeonhwa II, and Ulchin deposits are of hegro type. This classification is not applicable to all kinds of skarn deposits, but may be applicable to such deposits as are more controlled by oxygen fugacity than composition of skarn fluid.

• Advances in environmental research
• /
• 제2권2호
• /
• pp.119-129
• /
• 2013

The study examined the effect of urbanization on the water quality of Nwaorie and Otamiri Rivers in Owerri metropolis, Imo State, South-East Nigeria. Water samples were collected from Nwaorie and Otamiri Rivers from four sampling stations up and down stream. Water parameters analyzed using standard procedures were: color, turbidity, temperature, pH, total hardness, total solids, metals (Iron and magnesium), anions (nitrate and ammonia) and Fecal coliform. Results showed increased levels of coloration, iron, ammonia, turbidity and fecal coliform which exceeded the World Health Organization (WHO) permissible limits for drinking water. Increase in these parameters indicated influx of industrial effluent from the nearby industries and indiscriminate disposal of wastes at the bank of the rivers. Application of ANOVA showed various degree of variation in pollutants levels between the two rivers and at different sampling points. River Nwaorie was observed to be more impacted than River Otamiri. High values of iron observed from the study could be deleterious to human health if the river water is consumed without treatment. The study, therefore, recommended proper waste management and disposal as well as effluent treatments in Owerri municipal against pollution of surface water.

• 대한지역사회영양학회지
• /
• 제27권3호
• /
• pp.245-253
• /
• 2022

Objectives: This study was conducted to find out if the dietary iron intake of Koreans estimated by 2 different methods (iron content sources) using the food intake data from the Korea National Health and Nutrition Examination Survey (KNHANES) are comparable. One method was based on the KNHANES's Food & Nutrient Database (FND) derived mainly from the Korean Food Composition Table and the other used the iron content (IC) of food samples processed in the Korean Total Diet Study (KTDS). Methods: Dietary intake data from the 2013-2016 KNHANES was used to select representative foods (RFs) in KTDS for iron analysis. Selection of the RFs and cooking methods for each RF (RF × cooking method pair) was performed according to the 'Guidebook for Korean Total Diet Studies' and resulted in a total of 132 RFs and 224 'RF × cooking method' pairs. RFs were collected in 9 metropolitan cities nationwide once or twice (for those with seasonality) in 2018 and made into 6 composites each, based on the origin and season prior to cooking. Then, the RF composites prepared to a 'table ready' state for KTDS were analyzed by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Dietary iron intake of the Korean population was estimated using only RFs' intake data based on the 2 sources of iron content, namely FND-KNHANES and IC-KTDS. Results: RFs in KTDS covered 92.0% of total food intake of Koreans in the 2016-2018 KNHANES. Mean iron intake of Koreans was 7.77 mg/person/day by IC-KTDS vs 9.73 mg/person/day by FND-KNHANES. The major food groups contributing to iron intake were meats (21.7%), vegetables (20.5%), and grains & cereals (13.4%) as per IC-KTDS. On the other hand, the latter source (FND-KNHANES) resulted in a very different profile: grains & cereals (31.1%), vegetables (16.8%), and meats (15.3%). While the top iron source was beef, accounting for 8.6% in the former, it was polished rice (19.2%) in the latter. There was a 10-fold difference in the iron content of polished rice between 2 sources that iron intakes excluding the contribution by polished rice resulted in very similar values: 7.58 mg/person/day by IC-KTDS and 7.86 mg/person/day by FND-KNHANES. Conclusions: This study revealed that the dietary iron intake estimated by 2 different methods were quite comparable, excluding one RF, namely polished rice. KTDS was thus proven to be a useful tool in estimating a 'closer-to-real' dietary intake of nutrients for Koreans and further research on various nutrients is warranted.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.398-403
• /
• 2001

There is a potential usability of electric arc furnace(EAF) dust produced during the iron manufacturing process as a recycled resource, because valuable materials such as Zn, Pb and Fe are contained in it. In this study, metallic Zn was recycled from the fine electric arc furnace dust by a solid state reduction method using carbon at relatively low temperature. It was possible to recover metallic zinc by using of high vapour pressure of zinc with this reduction method. The feasibility of recycled zinc for cold bonded pellet(CBP) was investigated. The main composition of EAF dust were franklinite(ZnFe$_2$O$_4$), magnetite(Fe$_3$O$_4$) and zincite(ZnO), and Pb and Cl were completely removed by a heat treatment in oxidation environment. The reduction ratio increased as the solid carbon content increased, and it increased with decreasing of dust particle size and increasing of compaction pressure due to a increase of contact area.

• 국제초고층학회논문집
• /
• 제9권1호
• /
• pp.53-60
• /
• 2020

"A practical architect might not unnaturally conceive the idea of erecting a vast edifice whose frame should be entirely of iron, and clothing the frame--preserving it--by means of a casing of stone…that shell must be regarded only as an envelope, having no function other than supporting itself..." --Viollet-le-Duc, 1868. Viollet-le-Duc's recipe for an encased iron frame foresaw the separation of structural and enclosing functions into discrete systems. This separation is an essential characteristic of skyscrapers today, but at the time of his writing cast iron's brittle nature meant that iron frames could not, on their own, resist lateral forces in tall structures. Instead, tall buildings had to be braced with masonry shear walls, which often also served as environmental enclosure. The commercial availability of steel after the 1880s allowed for self-braced metal frames while parallel advances in glass and terra cotta allowed exterior walls to achieve vanishingly thin proportions. Two Chicago buildings by D.H. Burnham & Co. were the first to match a frame "entirely of iron" with an "envelope" supporting only itself. The Reliance Building (1895) was the first of these, but the Fisher Building (1896) more fully exploited this new constructive typology, eschewing brick entirely, to become the first "building without walls," a break with millennia of tall construction reliant upon masonry

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.253-259
• /
• 1997

The iron doped GaAs single crystals were grown by liquid phase epitaxial method and its some physical properties were evaluated with a view to investigate the crystal quality and emission property. The isomer shift of 0.303mm/sec is calculated from low-temperature M ssbauer spectroscopy and we know that charge state of iron ion is 3+ in GaAs crystal. In low temperature photoluminescence, the deep emission bands with wide-line width have been observed at 0.99eV and 1.15eV in addition to sharp excitonic peaks. We attributed that these deep emissions are originated from substitutional Fe-acceptor which has charge state of 3+ and 2+, respectively.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.826-827
• /
• 2006

Copper infiltration is demonstrated as a viable solution to achieve higher mechanical properties by filling the interconnected porosities of a ferrous structure with copper infiltrant. This paper will present the results of a design of experiments study based on the selected processing variables in the copper infiltration process. The variables are the following: Infiltrating temperatures, infiltrating time at pre-heat zone and hot zone, the green density of iron part, the migration of copper into the iron part at different processing conditions. The results show the flexibility of the infiltration process to attain certain mechanical properties by changing the processing conditions.

• 한국전기전자재료학회논문지
• /
• 제11권1호
• /
• pp.62-66
• /
• 1998

M$\ddot{o}$ssbauer spectra of ferrimagnetic $Fe_2SE_8$ prepared with $^{57}Fe$ enriched iron have been taken at 298 K and below 78K, and Fe\ulcornerSe\ulcorner has been studied by X-ray diffraction. The crystal structure is found to be a "3c" hexagonal superstructure of the NiAs structure. Three sets of six-line hyperfine patterns were obtained and assigned to three magnetically nonequivalent sites of a superstructure of the crystal. The iron ions at all three sites are found to be in a highly covalent ferrous state. It is shown that the results obtained at the low temperature region are well consistent with Okazaki's "3c" superstructure model.uperstructure model.