• 보존과학연구
• /
• s.23
• /
• pp.131-147
• /
• 2002

Kkonmoe relic located in Jangan-gu, Suwon-si, Gyeonggi-do Provinceis an example of the wide chronology from the Three Kingdoms Period to Joseon Dynasty. Examinations on a forged iron ax, a cast iron ax and an iron sickle excavated from this relic revealed the microstructure structure of the metal and the manufacturing technologies. Microstructure investigation was carried out with a metallurgical microscope and a Vickers hardness tester was used to measure the hardness of the micro structures. The test results show that the forged iron ax has a ferrite and pearlitestructure. It is made of low carbon steel and then carbonized to increase carbon content. After carbonization, the surface grains are reworked and the surface decarbonized. In case of the iron sickle, it is forged from low carbon steel, then carbonized and hardened, to increase overall strength. The sickle blade is carbonized and quenched after forging, resulting in afirm, solid blade. Heat treatment to remove brittleness is not applied to the cast ironartifact, which is manufactured by solidifing hypo-eutectic cast iron with a3-4% carbon content and white cast iron. All artifacts are produced from steel and subjected to a carbonization process. To increase hardness of the blade, additional heat treatment is applied.

• Journal of Conservation Science
• /
• v.34 no.4
• /
• pp.273-281
• /
• 2018

$Ji{\check{u}}di{\grave{a}}n$ iron production site in China is a relic smelting site, which in the past produced pig iron. In this study, scientific analysis of the smelting furnace and collected slag was conducted to reveal some aspects of the ancient Chinese smelting technique. A 3D model of the smelting furnace showed a narrow lower part and an upper section which increased in diameter upwards. Although the smelting furnace relic does not include the upper part and its complete shape cannot be predicted, the remaining part suggests that the furnace had a larger diameter in the central part compared to the upper and lower parts. Most of the collected slag was completely vitrified. Long prismatic fayalite was observed in the matrix of some samples. The iron particles contained phosphorus, which could not be discharged during smelting work. In addition, as the $CaO/SiO_2$ ratio was 0.42 or lower in the results of the content analysis, no CaO slag former had been added. However, the ratio of $CaO/SiO_2$ to $Al_2O_3/SiO_2$ did not have a constant trend. This needs to be investigated in a further study.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.171-182
• /
• 2010

The slag excavated from Gyesil-ri in Gongju, Yeonje-ri in Cheongwon and Beopcheonsaji (temple) site in Wonju are analyzed by X-ray Fluorescence Analyzer, metallurgical microscope, SEM-EDS etc., for chemical composition and microstructure to figure out the raw material and the iron manufacturing technique. First of all, as a result of principal component analysis, the total Fe-content of slag from Gyesil-ri is 39 to 44% and the modified rate is 15 to 21%, which is common in ancient iron slag. Yeonje-ri site is found the ancient iron-smelting furnace. The total Fe-content of slag from Yeonje-ri is 41 to 43% and modified rate is 18~30%, which is also the general value in the ancient slag. However only slag is excavated in the residential area at Beopcheonsaji site and there is no iron making relic. In addition, the result of principal component analysis contains that the total Fe-content of Beopcheonsaji site is 52 to 57%, and modified rate is 8 to 14%. It shows that the total Fe-content of Beopcheonsaji site is higher than relic from Gyesil-ri and Yeonje-ri and the modified rate is lower than other sites. This results mean that recollecting rate of Fe in Beopcheonsaji site is lower than other sites. Also, as a result of minor elements analysis, the slag from Gyesil-ri has the higher level of Ti, V and Zr than other sites and the microstructure are observed as magnetite and ulvospinel, so that the raw material of slag is iron sand. But the slag from Yeonje-ri and Beopcheonsaji site are identified to use iron ore. As a result of microstructure observation, fayalite, gray-columnar crystal, is found in the slag from Yeonje-ri and big wustite as main phase is observed in the slag from Beopcheonsaji site. This study show that the slag from Yeonje-ri is made of smelt ash produced during smelting works and the slag from Beopcheonsaji site is made of forging ash produced during forging work concerning the excavated location and the microstructure.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.263-275
• /
• 2014

It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.

• Conservation Science in Museum
• /
• v.5
• /
• pp.17-22
• /
• 2004

The metal vessel which was excavated during the Japanese rule and separated into many pieces was conserved. The relic was stabilized through conservation treatment, and its original shape was restored. After the conservation treatment, it was discovered that the metal vessel has the bottom part and a catch near the mouth and was made in a streamline shape which becomes narrower inward. Radiographic examination test revealed many pores which were produced during the process of casting. It was found through the analysis of the metal structure that the material used was hypereutectic white cast iron with primary graphites.

• Conservation Science in Museum
• /
• v.14
• /
• pp.1-5
• /
• 2013

This study was conducted to analysis and conserve a lacquered sheath excavated from Soochon-ri, Gongju, Korea. The lacquered sheath was collected together with iron relics. The lacquered sheath was damaged and lost the parts by the external pressure. Many parts were adhered with the rust. Firstly, the object was understanded to have the relation with the iron materials excavated together through the X-ray photographs. As the analysis of the lacquer layers, the report conducted to a study the method of production. After the analysis of relic, the conservation treatment was performed for the stability of original shape. And we made the protection frame for the storage and exhibition.

• Korea Science and Art Forum
• /
• v.30
• /
• pp.251-261
• /
• 2017

Metal is a material that has exerted a lot of influence on the development of human cultures, and has closely connected with our life from the past to the present. Types of metal we have used from the prehistoric times are varied, and iron relics take the largest percentage of metal relics excavated in our country. The biggest threat to the existence of iron relics ranging from excavated relics to the ones that are transmitted is the process of corrosion, and physical removal has been used the most for removing corroded oxides. For details for removal of corrosion oxides, this thesis aimed to research on the chemical corrosion oxides remover that protects parent material of iron relics but treats corrosion oxides only. For safe and effective removal of corrosion oxides of iron relics, this study was conducted aiming at finding the possibility of and optimized composition for removal of iron relics corrosion oxides by manufacturing new acid, alkaline and neutral oxides removers and changing their composition variously, exploring the possibility by applying the agents to modern relics. The results of this study are as follows: First, the acid solution removed only some part of corrosive substance oxidized on the surface of metal specimen. Second, the application of each of alkaline and neutral solution resulted in remaining black-colored corrosive substance, but it was removed when the quantity of the solution and the duration of application are increased. Third, All the three solutions did not cause any damage to parent material in the course of application, and showed the result that they are capable of removing unstable oxide layer while protecting parent material and stable corrosive layer as the solutions would be able to deal with situation by a relic only through the control of concentration of solution and duration of application.

• Journal of Conservation Science
• /
• v.21
• /
• pp.41-48
• /
• 2007

The resistance for atmospheric corrosion of the conventional 5 epoxy resins (Araldite rapid, Araldite AW 106, Araldite SV 427, Devcon, and CDK), those were used to restoration of the iron relics, were investigated in this study. Temperature, UV light, and water were chosen for the factors of the atmospheric corrosion. The drastic voluminous changes of the epoxy resins were found at the temperature range between $40^{\circ}C$ and $70^{\circ}C$ After UV exposure, the colors of the epoxy resins were severely changed. In case of the indoor exposure the chroma value(${\Delta}E$) of the resins were less than 2, which showed a little changes of the colors. The result of the water contact angle test was Araldite rapid>AW 106>Devcon>SV 427>CDK. Although the contact angles of the resins were reduced by UV exposure, SV 427 was stable comparatively.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.216-233
• /
• 2020

This study set out to review tomb culture in the Gyeongju region during the Bronze Age, and also examine the patterns of dolmens during their end phase. For these purposes, the study analyzed 18 tomb relics from the Bronze Age and nine from the early Iron Age. Gyeongju belongs to the Geomdan-ri cultural zone. Approximately 120 tombs from the Bronze Age have been excavated in the Gyeongju region. There are fewer tombs than dwellings in the region, which is a general characteristic of the Geomdan-ri cultural zone. Although the number of tombs is small, the detailed structure of the dead body is varied. During the Bronze Age, tombs in the Gyeongju region were characterized by more prolific construction of pit tombs, dolmens with boundaries, and stacked stone altars than were the cases in other areas. There is a great possibility that the pit tombs in the Gyeongju region were influenced by their counterparts in the northeastern parts of North Korea, given the spindle whorl artifacts buried at the Dongsan-ri sites. Dolmens with boundaries and stacked stone altars are usually distributed in the Songguk-ri cultural zone, and it is peculiar that instances of these are found in large numbers in the Gyeongju region as part of the Geomdanri cultural zone. Even in the early Iron Age, the building of dolmens with boundaries and stacked stone altars continued in the Gyeongju region under the influence of the Bronze Age. A new group of people moved into the area, and they crafted ring-rimmed pottery and built wooden coffin tombs. In the early Iron Age, new rituals performed in high places also appeared, and were likely to provide venues for memorial services for heavenly gods in town-center areas. The Hwacheon-ri Mt. 251-1 relic and the Jukdong-ri relic are ruins that exhibit the aspect of rituals performed in high places well. In these rituals performed in high places, a stacked stone altar was built with the same form as the dolmens with boundaries, and a similar rock to the cover stone of a dolmen was used. People continued to build and use dolmens with boundaries and stacked stone altars while sustaining the Bronze Age traditions, even into the early Iron Age, because the authority of dolmens was maintained. Some dolmens with boundaries and stacked stone altars, known as being Bronze Age in origin, would have continued to be used in ritual practices until the early Iron Age. Entering the latter half of the second century B.C., wooden coffin tombs began to propagate. This was the time when the southern provinces, including the Gyeongju region, were included in the East Asian network, with the spread of ironware culture and the arrival of artifacts from central China. Around this time, dolmen culture faded into history with a new era beginning in its place.

• Conservation Science in Museum
• /
• v.12
• /
• pp.19-24
• /
• 2011

This study presents an investigation into the conservation process of an iron dagger and scabbard, which are a lacquered scabbard and a dagger inserted in it, excavated in the Daho-ri relic of Changwon by Gimhae National Museum. The bronze dagger whose condition was poor due to corrosion was coated with Incralac, an intensifier, to reveal the surface patterns through a microscope. The lacquered scabbard was removed of foreign substances on the surface and coated with HPC 2%(in water) to protect the film. Applied onto the surface from which foreign substances were removed was Caparol Binder 5%(in water) two to three times to form a protective film and then faced with Korean paper. Once it was fixed in a polyurethane foam in a stable manner, it was turned over to receive the same process on the back. Three layers of Korean paper were attached to the back of the scabbard to support the thin artifact. HPC 2%(in water), which was applied to the scabbard, was also applied to the iron dagger inside for cementing effect. After all the processes were completed, the artifact was put in a transparent acrylic box for future display.