• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.1080-1082
• /
• 2011

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.301-302
• /
• 2006

Machinability and machining mechanism were examined in the case where resin impregnation treatment was conducted to the Mo-Co hardening particle dispersed iron-based sintered alloy. As a result, the force required for machining decreased significantly compared with the case where resin impregnation treatment was not conducted. This effect is considered to be attributable to the embrittlement of cutting chips produced by the minimization of the cut material deformation.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1014-1014
• /
• 2006

• 자원리싸이클링
• /
• 제3권2호
• /
• pp.9-16
• /
• 1994

본 연구에서는 제철소 전로 dust를 사용하여 일차보고의 기초적인 철분말의 회수에 이어 semi pilot 장치의 혼식 사이클론(wet cyclone)을 사용해서 고순도의 철분말을 회소하여 분말합금용(용접봉용 포함) 원료, 철분법 페수처리용 등으로 그 용도를 개발하고자 하였으며, 이를 통하여 다음과 같은 결론을 얻었다. 1. 광양제철소 EC dust를 vibration mill로 2분 동안 마광한 다음 혼식 사이클론에 분급하여 얻어진 철분말(+200 mesh. underflow)를 다시 아트리터에서 5분 동안 마광한 후 분급실험을 하여 고순도으 철분말(Total Fe 99.76%)을 47.66% 회수할 수 있었다. 2. 전로 dust에서 회수한 철분말은 +65 mesh : 36.16%, 65/100 : 24.43%, 100/200 : 26.68%, 200/270 : 12.64%의 입도분포를 가지고 있었으며, 모두 ${\alpha}$-Fe러 flake형을 보이고 있었다. 3. 재항 CF dust와 광양 EC dust에서 회수한 철분말을 가지고 동이온 제거실험을 한 결과, 철분말에 의해서 동이온이 99%이상 제거됨을 알 수 있었다. 4. 전로 dust를 적당시간 마광하여 혼식 사이클론에 의해 +270mesh(underflow)와 -270 mesh(overflow)로 입도로 분급한 후, -270 mesh 의 입도(산화철)는 폐수처리용 원료로 사용하고, +270mesh 의 입도(철분말)는 분말합금용(용접봉용 포함) 원료로 사용하는 것이 바람직하다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.568-569
• /
• 2006

The use of the nickel free, high nitrogen stainless steel powder and nitriding during sintering of iron based materials have been shown as an alternative way to the conventional PM stainless steels containing nickel. Nitrogen as an alloying element for iron improves in an effective way the properties of sintered alloyed steels. The powder metallurgy route is a suitable way to introduce nitrogen into these alloys and, in particular, to produce high nitrogen (close to the solubility limit) stainless steels. The paper presents and discusses the nitriding behavior of nickel-free stainless steels produced by powder metallurgy method. Alloyed melt was atomized by nitrogen and in this way nitrogen was introduced into the powder. Further nitriding occurred during sintering in a nitrogen atmosphere. For comparison, compacts having the same composition as an alloyed powder were produced from elemental powders mixture. Sintering-nitriding behaviour of investigated materials has been controlled by dilatometry, chemical and X-Ray phase analysis and metallography. Mechanical properties of sintered compacts were also measured.

• 한국주조공학회지
• /
• 제8권3호
• /
• pp.287-295
• /
• 1988

The experiment was carried out for the purpose of studying the carburization of pure iron ingot and sintered iron powder by solid carbon in the atmosphere of CO gas. The volocity of carburization was estimaed by the diffusion coefficient D calculated by carburization equation. The results obtained were as follow: 1. The higher the carburization temperature, carburization depth and carbon concentration were increased, and the melting zone which had $2.8{\sim}3.4%C$ at the $3{\sim}4mm$ from interface of carburization was formed at $1300^{\circ}C$. 2. The main carburization mechanism of pure iron ingot and the sintered iron powder were proceeded by CO gas up to $1100^{\circ}C$, solid carbon over than $1300^{\circ}C$, respectively. 3. The main carburization mechanism of pure iron ingot at $1200^{\circ}C$ was proceeded by solid carbon, and sintered iron powder was proceeded bs CO gas, however, in case the reaction time, the carburization was proceeded by solid carbon over than 5hrs. 4. The diffusion coefficient D of carbon were $0.559{\times}10^{-6}cm^2.sec^{-1}$ at $1100^{\circ}C$, $0.237{\times}10^{-6}cm^2.sec^{-1}$ at $1200^{\circ}C$, $0.087{\times}10^{-6}cm^2.sec^{-1}$ at $1300^{\circ}C$, in case of pure iron ingot carburized. 5. The diffusion coefficient D of carbon were $0.124\;cm^2.sec^{-1}$ at $1100^{\circ}C$, $0.102\;cm^2.sec^{-1}$ at $1200^{\circ}C$, $0.480\;{\times}10^{-6}cm^2.sec^{-1}$ at $1300^{\circ}C$, in the case of sintered iron carburized at the pressuring $4ton\;/\;cm^2$.

• 한국분말재료학회지
• /
• 제13권4호
• /
• pp.250-255
• /
• 2006

Wear behaviors of gas atomized and extruded Al-Si alloys were investigated using the dry sliding wear apparatus. The wear tests were conducted on Al-Si alloy discs against cast iron pins and vice versa at constant load of 10N with different sliding speed of 0.1, 0.3, 0.5m/s. In the case of Al-Si alloy discs slid against the cast iron pins, the wear rate slightly increased with increasing the sliding speed due to the abrasive wear occurred between Al-Si alloy discs and cast iron pins. Conversely, in the case of cast iron discs against Al-Si alloy pins, the wear rate decreased with increasing the sliding speed up to 0.3m/s. However, the wear rate increased with increasing the sliding speed from 0.3m/s to 0.5m/s. It could be due to adhesive wear behavior and abrasive wear behavior_between cast iron discs and Al-Si alloy pins.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.790-791
• /
• 2006

The fracture behavior and mechanical characteristics of sintered rare-earth magnets were investigated. It shows that the fracture behavior and bending strength of the magnets obviously exhibit anisotropy. Sm-Co magnets tend to cleavage fracture in the close-packed (0001) plane or in the ($10\bar{1}1$) plane. The fracture mechanism of $Nd_2Fe_{14}B$ magnet mainly appears to be intergranular fracture. The anisotropy of fracture behavior and mechanical strength of sintered rare-earth magnets is caused mainly by the strong crystal-structure anisotropy and the grain alignment texture. The effects of Nd content, and Pr, Dy substitution on the impact stability of $Nd_2Fe_{14}B$ magnets were also reported.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1994년도 춘계학술대회강연 및 발표대회 강연및 발표논문 초록집
• /
• pp.7-7
• /
• 1994

For more than a decade components of low alloy iron powder with nickel and/or molybdenum for general engineering applications have been manufactured from powder metal. In the time to come such PM steel components will gain increasing significance. Because of various manufacturing difficulties they are mostly produced in two separate steps - sintering and hardening - which means high energy and labour requirements. The paper describes how such PM components are produced in just one run through a conveyor belt furnace with automatic atmosphere control and gas quenching zone. Energy and labour costs are low and reproducible quality is exceilent. The mechanical properties obtained with some powder alloys are presented as well.

• 한국식품저장유통학회지
• /
• 제23권5호
• /
• pp.753-757
• /
• 2016

본 연구에서는 도축장에서 폐수 처리되는 돈혈을 활용하여 단백질 분해 효소 처리를 하여 철분함량 및 용해도가 높은 철분분말을 제조하고자 하였다. 철분함량을 높이기 위하여 효소처리 및 혈액 분리 정도에 따른 돈혈 분말의 품질특성을 분석하였고, 그 결과 수급 받은 돈혈의 전혈에 Thermoase 0.2%를 첨가한 후 $60^{\circ}C$에서 4시간 처리하여 여과, 열풍건조처리를 하였을 때 철분함량이 110.00 mg/100 g 으로 가장 높은 것으로 확인되었으며, 재수화성 역시 높은 것을 확인하였다. 또 철분 보조제로써 활용 가능 여부를 확인하기 위하여 최종조건에 따라 제조 된 돈혈분말의 생체이용률을 측정하였으며, 대표적인 시중 판매 제품 보다 2.9배 높은 것으로 확인 되었다. 따라서 영양학적 가치가 있는 돈혈을 활용하여 철분분말을 제조한다면, 수입에 의존하고 있는 철분시장에 국내산 천연재료 공급이 가능할 뿐만 아니라 이의 폐기처리로 인한 비용처리 및 환경오염을 줄일 수 있을 것으로 기대된다.