• 한국광물학회지
• /
• 제10권2호
• /
• pp.148-161
• /
• 1997

Based on the X-ray powder diffraction (XRD) and M ssbauer spectroscopy, the thermal behavior and phase transformations of two clays are investigated for raw and fired conditions, which are collected from Kwangryeongli and Ildo district in Cheju Island. M ssbauer spectra at room temperature and 20for two clays show that paramagnetic Fe3- is the structural iron of the layer silicate and ferrihydrite, and superparamagnetic goethite has about 50% of total iron contents. The XRD peaks of hematite for the fired clays appear from 80$0^{\circ}C$ in Kwangryeongli clay and from $600^{\circ}C$ in Ildo district clay, respectively. The structural Fe2+ was completely oxidized into Fe3- at 40$0^{\circ}C$ for Kwangryeongli clay and 50$0^{\circ}C$~$600^{\circ}C$ for Ildo district clay, respectively. The structural Fe2+ was completely oxidized into Fe3- at 40$0^{\circ}C$. For the temperature ranging from 40$0^{\circ}C$ to $700^{\circ}C$~80$0^{\circ}C$, two fired clays exhibit the dehydroxylation of the clay mineral. A disintegration of the clay mineral structure is observed from $700^{\circ}C$~80$0^{\circ}C$ to 110$0^{\circ}C$, followed by the onset and spread of vitrification process. It is also shown that well-crystallized hematite phase is formed at the temperature higher than 110$0^{\circ}C$ and the relative absorption area decreases, which might be related to the recrystallization of alluminosilicate matrix.

• 자원환경지질
• /
• 제24권2호
• /
• pp.107-129
• /
• 1991

The Yonghwa gold-silver deposits are emplaced along $N15^{\circ}{\sim}25^{\circ}W$ trending fissures in middle Cretaceous porphyritic granite or Precambrian Sobaegsan gneiss complex. The results of paragenetic studies suggest that vein filling can be subdivided into four identifiable stages; state I: the main sulfide stage, characterized by base-metal sulfide minerals, iron oxides and minor electrum, stage II: electrum stage, stage III: electrum and silver-bearing sulfosalts stage, stage IV: post ore stage of carbonates and quartz. The ore mineralogy suggests that depositional temperature of the formation of the gold and silver minerals are estimated as 200 to $250^{\circ}C$ and 140 to $180^{\circ}C$, respectively. Sulfur fugacity of the formation of the gold and silver minerals are estimated as $10^{-14.0}$ to $10^{-12.2}$ atm and $10^{-18.5}$ to $10^{-17.2}$ atm, respectively. A consideration of the pressure regime during ore deposition bases on the fluid inclusion evidence of boiling suggests lithostatic pressure of less than 180 bars. This range of pressure indicate that vein system lay at depth of 700m below the surface at the time during mineralization. Salinities of ore-bearing fluids range from 0.4 to 6.9 wt.% equivalent NaCl. The sulfur and carbon isotopic data reveal that these elements were probably derived from a deep-seated source. The ${\delta}^{18}O$ of the hydrothermal fluid was determined from ${\delta}^{18}O$ values of quartz and calcite. Oxygen and hydrogen isotopic studies reveal that meteoric water dominate over ore-bearing fluid.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.514-522
• /
• 2014

A new type of high precision electromagnetic suspension (EMS) which can support heavy tray along long stroke rail is proposed in this paper. Compared with the conventional EMS, the suggested moving-core typed EMS has the levitation electromagnets (EMs) on the fixed rail. This scheme has high load capability caused by iron-core and enables simple tray structure. Also it does not have precision degradation caused by heat generation from EMs, which is a drawback of conventional EMS. With these merits, the proposed EMS can be an optimal contactless linear bearing in next generation flat panel display (FPD) manufacturing process if the ability of long stroke movement is proved. So a special Section Switching Algorithm (SSA) is derived from the resultant force and moment equations of the levitated tray which enables long stroke movement of the tray. In order to verify the feasibility of the suggested SSA, a simple test-setup of the EMS with 2 Section-changes is made up and servo-controlled in the simulation and experiment. The simulation shows the perfect changeover the EMs, and the experiment shows overall control performance of under ${\pm}40{\mu}m$ gap deviations. These results reveal that the newly suggested contactless linear bearing can simultaneously achieve high load capability and precision gap control as well as long stroke.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.522-526
• /
• 1994

There are great needs for checking machine operation status precisely in the iron and steel plants. Rotating machines such as pumps, compressors, and motors are the most important objects in the plant maintenance. In this paper back-propagation neural network is utilized in diagnosing rotating machines. Like the finger print or the voice print of human, the abnormal vibrations due to axis misalignment, shaft bending, rotor unbalance, bolt loosening, and faults in gear and bearing have their own spectra. Like the pattern recognition technique, characteristic. feature vectors are obtained from the power spectra of vibration signals. Then we apply the characteristic feature vectors to a back propagation neural net for the weight training and pattern recognition.

• 한국광물학회지
• /
• 제1권1호
• /
• pp.1-14
• /
• 1988

최근 국내에서의 고령토의 다양한 공업적 이용추세는 다량의 고품위 고령토를 필요로 하게 되었다. 그러나 하동-산청지역의 고령토 광석은 저품위가 대부분인 반면 그 양은 막대하다. 고령토의 저품위 현상은 산화철광물과 함철 규산염광물등 고령토 이외의 광물들이 고령토 광석에 다량 함유된데 기여한다. 그릴제거, 자력분리 및 디티오나이트에 의한 침출등 종래의 정제 방법에 의하여 제작된 고령토 정광에는 아직도 상당량의 철분이 함유되어 있어서 정광의 품위가 높지 않다. 고령토 광석으로부터 분리해낸 순수한 할로이사이트는 평균 Fe2O3 0.4%를 함유하고 있으며 이 철분은 할로이사이트내에 구조철로 함유되어 있다. 고령토에 함유되어 있는 함철광물로는 산화광물(적철석, 자철석, 침철석, 티탄철석)과 규산염광물(감섬석, 버미큘라이트, 일라이트, 녹니석)이 있다. 종래의 정제방법으로는 대부분의 산화철광물들은 제거 되었지만 버미큘라이트(Fe2O3 0.9%)와 일라이트 (Fe2O3 1.2%)는 고령토 정광에 계속 남아 있어서 저품위 정광이 되고 있다. 버미큘라이트와 일라이트의 함유가 주로 고령토 정광의 저품위의 원인이 되고 있기 때문에 고품위 고령토 정광을 생산하기 위해서는 이들 두 광물을 제거해야 한다.

• 자원환경지질
• /
• 제15권1호
• /
• pp.33-39
• /
• 1982

The Seosan Group in the Taean peninsular can be divided into Seosan formation and Daesan formation according to its metamorphism and stratigraphy. The Seosan formation is composed of iron bearing quartzite and schist which are strongly metamorphosed and migmatized about 2572 m.y.ago. The Daesan formation is composed mainly of quartzite and crystalline limestone. They were intruded by granite gneiss 2370m.y ago and metamorphosed two or three times before Jurassic Period. The Group is overlain by Taean formation which shows low grade metamorphism. Total three times metamorphic events can be recognized in these areas. First and second metamorphisms are predominent in amphibolite facies, the last metamolphism is mostly greenschist facies.

• 열처리공학회지
• /
• 제2권2호
• /
• pp.68-83
• /
• 1989

Physical metallurgy aspects of gaseous ferritic nitrocarburising are reviewed in the light of basic studies undertaken since 1975 which have illustrated inconsistencies between the iron-carbon-nitrogen ternary phase diagram at $570^{\circ}C$ and the experimental observation of the co-existence of the ${\varepsilon}$ carbonitride phase and ferrite. Thermodynamic investigations by Xu and Li together with those by Slycke et al are reviewed to illustrate compatability between a modified isothermal section of the Fe-C-N system and the formation and growth of a monophased ${\varepsilon}$ structure under a variety of processing conditions. The implications of the modified diagram in terms of innovations in industrial ferritic nitrocarburising practice are discussed, together with limitations on the control of the process. The importance of the developing technology of black nitrocarburising for enhanced wear, fatigue, and corrosion resistance is emphasised. Basic studies and industrial status of austenitic nitrocarburising treatments are also reviewed, which highlight the importance of substrate strengthening for high load bearing applications of anti-scuff thermochemical treatments.

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.31-38
• /
• 2001

This paper deals with the micro turning property of setting angle using diamond tool. The bed of the system has used the granite which has the thermal and vibrational characteristics superior to the cast iron bed for the common machine tool. To minimize the inner and outer vibration of the fuming system, an air pad system was manufactured and tested. The aero-static spindle system which has the excellent rotation accuracy was designed and manufactured. As a result of the micro-cutting test on aluminum alloy, tool setting angel have effected on surface roughness. From the results, the micro-cutting conditions hope to provide the useful actual data using in industrial fields.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.323-326
• /
• 1999

In this paper, a windmill type ultrasonic motor operated by single-Phase AC electric field was fabricated, and then torque characteristics were investigated. A metal-ceramic composite component was used as the stator\`s vibrator to generate ultrasonic vibrations. The windmill type ultrasonic motors has only three components; a stator element with two wind-mill shape slotted metal endcaps, a rotor and a bearing. In this parer we measured torque, when stator\`s slot was changed Iron 4, 6, 8. Brass metal was pressed with umbrella-type using metal molt then slot of 3 kind was manufactured. The maximum revolution speed was 388(rpm) in the case of a small ultrasonic motor of 11.35 mm diameter, 8 slot and 1.01 mm thickness. The maximum torque of 0.17 mNm was obtained at a speed of 131 rpm.

• 암석학회지
• /
• 제27권2호
• /
• pp.85-96
• /
• 2018

옥천변성대의 북서부에 위치하는 충주 어래산지역은 신원생대 계명산층과 중생대 화성암류가 분포하고, 계명산층 내에 희토류 광화대가 보고된 바가 있다. 이 논문에서는 희토류 광체의 기원암과 그 분포 및 특성을 파악하기 위해 암상구분에 의한 상세한 지질도를 작성하고, 구성암류의 방사능 값을 측정하였다. 그 결과 신원생대 계명산층의 주요 암상은 변성이질암, 화강암질편마암, 함철규암, 변성심성산성암(호상형, 세립형, 함염기성형, 조립형), 변성화산산성암 등으로 구성되어 있고, 이를 관입하는 중생대 화성암류는 페그마타이트, 흑운모화강암, 반려암, 섬록암, 염기성 암맥 등으로 구분된다. 계명산층의 구성암류는 주로 동북동 방향의 대상분포를 보이고, 함염기성형 변성심성산성암의 분포는 이전 연구자에 의해 작성된 희토류 광체의 분포와 매우 유사하다. 그리고 중생대 흑운모화강암은 기존 연구결과와 달리 어래산지역의 전역에 광범위하게 분포한다. 또한 함염기성형 변성심성산성암은 연구지역의 구성암류 중에 가장 높은 방사능 값의 범위(852~1217 cps)와 평균값(1039 cps)을 보인다. 노두별 방사능 값의 최대 밀도를 보이는 분포영역은 또한 함염기성형 변성심성산성암의 분포 영역과 일치한다. 이는 함염기성형 변성심성산성암이 희토류 광체의 기원암일 가능성을 지시한다.