• Journal of Surface Science and Engineering
• /
• v.46 no.2
• /
• pp.87-92
• /
• 2013

Viscosities of $LaCl_3$-CsCl binary melts were measured by the capillary method over the range of their liquidus temperatures to about 1200 K. The cell constant were determined by using pure water. The results obtained are summerized as follows: Viscosities of melted $LaCl_3$ were decreased with the content of CsCl for all over the composition range of binary melts. Composition versus viscosity relation for the binary melt showed a non-linear relationship from the additivity line and the deviations showed a maximum value at about 60 mol% CsCl. This suggest the existence of the complex ion of $LaCl_4{^-}$ in the melt. Activation energy for the viscous flow of the binary melts decreased monotonously with the increasing content of CsCl after a few increasement till 40 mol% CsCl. All of these results were the resemble with the viscosities of $LaCl_3$-NaCl binary melts.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.538-543
• /
• 2009

In this study, methotrexate (MTX)-encapsulated polymeric micelles using methoxy poly(ethylene glycol) (MPEG)-grafted chitosan (ChitoPEG) copolymer were prepared. The MIX-incorporated polymeric micelles of ChitoPEG copolymer has a particle size of around 50-100 nm. In 1H nuclear magnetic resonance (NMR) study, the specific peaks of MTX disappeared in heavy water ($D_2O$) and only the specific peak of MPEG was observed, while all of the peaks were confirmed in dimethyl sulfoxide (DMSO). These results indicated that MTX was complexed with chitosan and then formed an ion complex inner-core of the polymeric micelle in an aqueous environment. The drug contents of the polymeric micelle were around $4{\sim}12%$ and the loading efficiency of MTX in the polymeric micelles was higher than 60% (w/w) for all of the formulations. The cytotoxicity of MIX and MTX-incorporated polymeric micelle against CT26 tumor cells was not significantly changed.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.89-92
• /
• 1998

1. Introduction : Among many azeotropic compounds, pyridine which forms an azeotropic mixture with three moles of water boiling at 92-93$\circ$C is very useful synthetic intermediate in laboratory and industry. With conventional separation method, the dehydration of pyridine aqueous solution is difficult and requires strong drying chemicals. To overcome these difficulties, several researchers have investigated on the separation of pyridine from aqueous solution through polymer membranes. Kujawski reported several ion-exchang membranes containing carboxylic and sulfonic fuctional group for dehydration of aqueous pyridine solution [1]. We have applied the idea of activation of water tranport through ion-dipole interactions between polymer membrane and aclueous feed. Our previous studies reported on the in-situ complex membrane to separate water from aqueous pyridine solution based on simple acid'-base theory [2, 3]. Water transport was enhanced through in-situ complex formation between the , acid moiety in the membrane and the incoming pyridine moiety in the feed.

• Journal of Powder Materials
• /
• v.12 no.1
• /
• pp.56-63
• /
• 2005

Ag powder was prepared from $AgNO_3$ by wet chemical reduction method using various reduction agent system involving $AgNO_3$, $AgNO_2$(AgCl) and Ag complex ion aqueous solution. The pure Ag powder could be prepared regardless of reaction system but the particle shape and distribution were affected very much according to the kind of reduction agents and reaction systems. The optimum reaction system for the preparation of the silver powder having the uniform particle shape and size distribution was Ag complex ion aqueous solution-reduction agent system and in particular, $H_2O_2$ and $C_6H_8O_6$as a reduction agent leaded the more uniform particle shape and size distribution.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.791-794
• /
• 2007

A new azocalix[4]arene, 5,14,17,23-tetra[(2-benzoic acid)(azo)phenyl] calix[4]arene (2), has been prepared by hydrolysis of its ester derivative and characterized by 1H NMR, IR, UV-Vis spectroscopy and elemental analysis. Based on UV spectral changes, we found that 2 exhibits Pb2+ ion selectivity. In basic media, Pb2+ forms a 1:1 complex with the ligand. Beer's law is obeyed in the range of 2.0 × 10?6 ? 2.4 × 10?5 mol L?1 of Pb2+. The molar absorptivity (ε ) of 2-Pb2+ complex is 1.89 × 104 L mol?1 cm?1 at 440 nm, and the detection limit is 1.6 × 10?6 mol L?1.

• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.355-360
• /
• 1984

A new absorption spectrum observed from dilute aqueous solutions of methylene blue$(MB^+)$ and tetraphenylborate(TPB$^-$) ions was investigated by spectrophotometry. The species responsible for the spectrum can be a charge-transfer complex formed between the two, univalent, and poorly hydrated ions in order to minimize the disturbance to the water structure. However, as the absorption band of MB$^+$ is split into two bands with exciton splitting of about 2,000 cm$^{-1}$, the formation of double ion-pair, (MB-TPB)$_2$ appears to be more favorable than the charge transfer complex.

• Archives of Pharmacal Research
• /
• v.9 no.2
• /
• pp.111-114
• /
• 1986

Bretylium tosylate is a quaternary ammonium compound used for the treatment of ventricular fibrilation in humans. It is advantageous to other cationic compound in the study of biliary excretion in that negligible amount is bound to plasma protein and metabolite is not likely is to be formed. Some researchers reported that the formation of ion-pair complex caused to increase the lipothilicity of cationic compound. The partition of bretylium between water and organic phase was increased with the addition of sodium taurodeoxycholate. Also sensitive gas chromatographical assay procedure using flame ionization detector was studied. This procedure can detect as low as 0.1 mg/ml using 0.1 ml biological sample, but contamination by previous injection is the major problem of this method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.5
• /
• pp.213-213
• /
• 2003

We investigated the monolayer behavior at the air-water interface with metal solution, the surface morphologies and the electrical properties such as conductivity, The calculated conductivity values of pure water subphase and its complexes with L $i^{+}$ ions are 5.6$\times$10$^{-l6}$ and 1.9$\times$10$^{-14}$ [S/cm], respectively. And the calculated barrier height D values of pure water subphase and its complexes with Li. ions are 0.70 and 0.66 [eV], respectively. We also attempted to fabricate a crown dendrimer Langmuir-Blodgett (LB) films containing functional end group that could form a complex structure with metal ions. Also, we investigated the surface activity of dendrimer films at air-water interface. In AFM images. the larger domains irregularly shaped structures on the top while the smaller ones were free from such defects. In conclusion, it is demonstrated that the metal ion around dendrimer and polymer included crown function group can contribute to make formation of network structure among crown function group and result in change of electrical properties.s.s.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.5
• /
• pp.213-218
• /
• 2003

We investigated the monolayer behavior at the air-water interface with metal solution, the surface morphologies and the electrical properties such as conductivity, The calculated conductivity values of pure water subphase and its complexes with L $i^{+}$ ions are 5.6$\times$10$^{-l6}$ and 1.9$\times$10$^{-14}$ [S/cm], respectively. And the calculated barrier height D values of pure water subphase and its complexes with Li. ions are 0.70 and 0.66 [eV], respectively. We also attempted to fabricate a crown dendrimer Langmuir-Blodgett (LB) films containing functional end group that could form a complex structure with metal ions. Also, we investigated the surface activity of dendrimer films at air-water interface. In AFM images. the larger domains irregularly shaped structures on the top while the smaller ones were free from such defects. In conclusion, it is demonstrated that the metal ion around dendrimer and polymer included crown function group can contribute to make formation of network structure among crown function group and result in change of electrical properties.s.s.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.4
• /
• pp.462-466
• /
• 1998

The homobimetallic anion, $({\eta}^5-MeCp)Mn(CO)_2Mn(CO)_5-M^+\; (M^+=Na^+, PPN^+$) was disrupted by $PR_3\;(R=C_6H_5,\;C_2H_5,\;OCH_3)$ in THF at various temperatures (r.t. ∼65℃) under the pseudo first order reaction conditions where excess of $PR_3$ was employed under a nitrogen atmosphere. For the reaction involving $PPN^+$ analog, Mn-Mn heterolytic cleavage occurred, leading to $PPN^+Mn(CO)_5^-\; and \;({\eta}^5-MeCp)Mn(CO)_2PR_3$ as products; however, in case of $Na^+\; analog,\; Na^+$ seems to play a novel counter ion effect on the disruption reaction by transferring one terminal CO from the $Mn(CO)_5$ moiety on to the $({\eta}^5-MeCp)Mn(CO)_2$ of the corresponding homobimetallic complex, eventually resulting in $Na^+Mn(CO)_4PR_3^-\;and\;({\eta}^5-MeCp)Mn(CO)_3$. This reaction is of overall first order with respect to [homobimetallic complex] with the activation parameters (ΔH≠=23.0±0.7 kcal/mol, ΔS≠= - 8.7±0.8 e.u. for $Na^+$ analog; ΔH≠=28.8±0.4 kcal/mol, ΔS≠=15.7±0.6 e.u. for $PPN^+$ analog reaction).