• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.647-657
• /
• 2011

The present paper proposes a sliding mode control with fixed switching frequency for three-phase three-leg voltage source inverter based four-wire shunt active power filter. The aim is to improve phase current waveform, neutral current mitigation, and reactive power compensation in electric power distribution system. The performed sliding mode for active filter current control is formulated using elementary differential geometry. The discrete control vector is deduced from the sliding surface accessibility using the Lyapunov stability. The problem of the switching frequency is addressed by considering hysteresis comparators for the switched signals generation. Through this method, a variable hysteresis band has been established as a function of the sliding mode equivalent control and a predefined switching frequency in order to keep this band constant. The proposed control has been verified with computer simulation which showed satisfactory results.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1241-1250
• /
• 2018

Parallel three-phase voltage source inverters in a direct connection configuration are widely used to increase system power ratings. A zero-sequence circulating current can be generated according to the switching method; however, the zero-sequence circulating current not only distorts current, but also reduces the system reliability and efficiency. In this paper, a model predictive control scheme is proposed for parallel inverters to drive an interior permanent magnet synchronous motor with zero-sequence circulating current suppression. The voltage vector of the parallel inverters is derived to predict and control the torque and stator flux components. In addition, the zero-sequence circulating current is suppressed by designing the cost function without an additional current sensor and high-impedance inductor. Simulation and experimental results are presented to verify the proposed control scheme.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.471-474
• /
• 2006

BIPV(Building Integrated PV) system can expect dual effects that reduce expenses for establishment of PV system by adding new function as outer covering material of building expect producing the electricity. But, there are many generation differences according to the exterior environmental facts(solar cell away, design and installation condition of interactive inverter system) Therefore, it is difficult to optimum design. Consequently in advance design system, we experiment 3kW BIPV(Building Integrated PV) generation. We concrete PV system efficient application of variable. BIPV system that is proposed in this paper, was established in Solar Energy research center of Chosun University, composed with system. This research is a basic study for application of building integrated photovoltaic system for builing.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.222-224
• /
• 2006

Electronic ballast uses various resonant type filters, which perform many important functions such as filtering the high frequency harmonics, shaping the proper lamp current waveform and regulating the lamp power. In this paper, characteristics of resonant type filters are reviewed and the matching problem between inverter and resonant filter are described. Transfer function which is always necessary for the circuit parameter design is derived in case of LCC filter type as an example.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.205-206
• /
• 2012

백업전원 기능을 갖는 BESS 시스템은 계통이상 시 계통연계모드에서 독립운전모드로 전환해야 하며 이때 중요부하에 과도상태 없는 안정적인 전압을 공급해야 한다. 기존의 전류제어 방법은 모드전환 시 과도상태가 발생하여 중요부하에 심각한 영향을 미칠 수 있다. 본 논문에서는 백업전원 기능을 갖는 BESS를 위한 양방향인버터에서 간접전류제어기법을 기반으로 양방향제어 및 끊김없는 모드전환 기법을 제안한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.485-486
• /
• 2015

This paper introduces the new 1200V $SPM^{(R)}$ (Smart Power Module), which is fully optimized and intelligent integrated IGBT inverter modules for up to 6kW motor drive applications. It utilizes newly developed NPT trench IGBT with the advanced STEALTHTM freewheeling diode, and built-in bootstrap diode. HVICs, multi-function LVIC, and built-in thermistor provide good reliable characteristics for the entire system. This module also takes technical advantage of DBC(Direct Bonded Copper) substrate for the better thermal performance. This paper provides an overall description of the newly developed 1200V/35A $SPM^{(R)}$ 2 product.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.514-515
• /
• 2012

본 논문에서는 인버터 모드 기능을 가지는 Quasi Z-소스 AC-AC 컨버터를 제안하였다. 제안된 시스템은 Quasi Z-소스 AC-AC 컨버터의 암단락 스위치 단에 PI제어가 된 양 방향 벅-부스트 컨버터를 연결하였다. 양방향 벅-부스트 컨버터에서 직류를 입력하는 모드를 인버터 모드라고 하고, 양방향 벅-부스트 컨버터에서 직류를 출력하는 모드는 컨버터 모드라고 한다. PSIM시뮬레이션에 의하여 인버터 모드 동작 시에는 직류 12V를 암단락 스위치단에 입력하여 AC_Load에 교류 전압를 출력하고, 컨버터 모드 동작 시에는 AC_Load에 교류 전압를 출력함과 동시에 암단락 스위치단에 연결된 DC_Load에 직류 전압을 일정하게 출력할 수 있음을 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권3호
• /
• pp.129-135
• /
• 2017

This paper introduces a design and a simulation of a hybrid active power filter (HAPF) for harmonics reduction given an ideal supply source. The synchronous reference frame method has been used here to identify the reference currents. The proposed HAPF uses a new artificial- intelligence technique called Particle Swarm Optimization (PSO) for tuning the parameters of a proportional and integral controller called PI-PSO. The PI-PSO controller is used to archive optimality for the DC-link voltage of the HAPF-inverter. The hysteresis non-linear current control method is used in this approach to compare the extracted reference and the actual currents in order to generate the pulse gate required for the HAPF. Results obtained by simulations with Matlab/Simuling show that the proposed approach is very flexible and effective for eliminating harmonic currents generated by the non-linear load with the HAPF based PSO tuning.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1211-1212
• /
• 2007

In the PV power system, output of the PV array must contain inherent ripples due to the single-phase inverter. So, the function of maximum power point tracking to increase the output efficiency of PV system is degraded. Therefore, to overcome this problem, this paper presents a control strategy for the reducing ripples of the PV array output in grid-connected photovoltaic power system. The proposed control system consists of two loops; the maximum power point tracking loop using the perturbation and observation method is used to calculate the reference solar array terminal voltage(Vref) for reducing ripples of the PV array output and the PI control loop is used to regulate the solar array output voltage according to the Vref. The performance of proposing control strategy is analyzed by means of the PSCAD/EMTDC simulation and experiment. As a result, we may obtain the high performance of the proposed control strategy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.36-38
• /
• 2001

A neutron controls a nuclear fission in the core of a reactor. Drive system for in-core neutron detector is an equipment that drives the detector and cable to survey neutron flux in the reactor. The drive system introduced by this paper was designed for mock-up system and fabricated to drive two drivers that having a different function. The system consists of a driver assembly, a power transmission part, and cable storage part. And there is a control panel that contains PLC and inverter. This paper is going to introduce the design and certify the operation status of completed system by control panal. And we conducted the test for torque measurement.