• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제20권12호
• /
• pp.711-716
• /
• 2014

최근 논문 표절 논란과 지능형 텍스트 검색서비스에 대한 관심이 증가하면서 문장 유사도 측정의 필요성이 증가하고 있다. n-gram, 편집거리, LSA 등 기존의 다양한 방향으로 선행 연구가 있었지만 각 기법마다 장단점이 존재한다. 본 논문에서는 집합 기반 POI 검색 기법을 이용한 새로운 방향의 문장 유사도 측정 기법을 제안한다. 집합 기반 POI 검색 기법은 하드매칭에 비해 단어의 도치, 누락, 삽입, 변경에 현저한 성능 향상을 보인다. 이 기법을 이용하면 보다 정확하고 빠른 문장 유사도 측정이 가능하다. 제안하는 기법은 기존 집합 기반 POI 검색 기법의 데이터 로딩 알고리즘과 텍스트 검색 알고리즘을 변형하고 어절 연산 알고리즘을 추가하여 두 문장의 유사도를 백분율로 표현한다. 실험을 통해 본 논문에서 제시하는 기법이 정확도와 속도에서 n-gram과 기존 집합 기반 POI 검색 기법에 비해 우수함을 확인하였다.

• KIEAE Journal
• /
• 제7권4호
• /
• pp.147-152
• /
• 2007

Numerous non-destructive tests(NDT) to assess the safety of real structures have been developed. System identification(SI) techniques using dynamic responses and behaviors of structural systems become an outstanding issue of researchers. However the conventional SI techniques are identified to be non-practical to the complex and tall buildings, due to limitation of the availability of an accurate data that is magnitude or location of external loads. In most SI approaches, the information on input loading and output responses must be known. In many cases, measuring the input information may take most of the resources, and it is very difficult to accurately measure the input information during actual vibrations of practical importance, e.g., earthquakes, winds, micro seismic tremors, and mechanical vibration. However, the desirability and application potential of SI to real structures could be highly improved if an algorithm is available that can estimate structural parameters based on the response data alone without the input information. Thus a technique to estimate structural properties of building without input measurement data and using limited response is essential in structural health monitoring. In this study, shaking table tests on three-story plane frame steel structures were performed. Out-put only model analysis on the measured data was performed, and the dynamic properties were inverse analyzed using least square method in time domain. In results damage detection was performed in each member level, which was performed at story level in conventional SI techniques of frequency domain.

• 대한토목학회논문집
• /
• 제31권5C호
• /
• pp.155-162
• /
• 2011

연약 지반 개량 현장의 효율적 시공 관리를 위해 침하 계측 자료를 이용한 정확한 향후 침하 거동 예측은 매우 중요하다. 현재 침하 예측을 위해 침하 계측 자료를 이용한 침하 예측 방법들이 널리 활용되고 있으나, 이러한 방법들은 일정 성토고 조건에서만 적용이 가능하며, 실제 현장처럼 계측 결과에 따라 지속적인 성토 변화가 발생하는 경우 적용이 매우 어렵다. 본 연구에서는 성토 조건의 변화를 고려한 침하량 예측을 위해 침하 계측 자료를 이용한 침하 예측 결과와 복잡한 현장 조건을 단순화하기 위한 가정 조건을 기반으로 간단한 역해석을 통해 향후 침하량을 이론적으로 예측할 수 있는 기법을 제안하였다. 대형 압밀 시험 결과, 유한 차분 해석 결과, 현장 침하 계측 자료에 제안 방법을 적용한 결과, 제안 방법이 하중의 재제하 등 다양한 성토 변화 조건에서 침하 거동을 신뢰성 있게 모사하였다.

• 한국운동역학회지
• /
• 제19권2호
• /
• pp.369-377
• /
• 2009

The purpose of this study was to determine the relationship between different soccer cleat designs and knee joint moments. Twelve physically active males (mean(SD): age: 26.4(6.2)yrs; height: 176.4(4.1)cm; mass: 74.0 (7.4)kg) were recruited Kinematic and force plate data were collected for all subjects during normal running and a $45^{\circ}$ cutting maneuver, called a v-cut. Both motions were performed at $4.0{\pm}0.2\;m/s$ on infilled artificial turf with three pairs of soccer cleats of different sole plate designs, and one pair of neutral running shoes. Inverse dynamics were used to calculate three dimensional knee joint moments, with repeated measures ANOVA and post hoc paired Student's t-test used to determine significance between shoe conditions. Significant differences were found in the extension moments of the knee for running trials, and for external rotation and adduction moments in the v-cutting trials. Knee moments were greater in v-cut than running, and the traditional soccer cleats (Copa Mondial and World Cup) tended to result in greater knee moments than the Nova runner or TRX soccer cleat. Cleat design was found to influence 3-dimensional knee moments in a v-cut maneuver. In the translational traction test, there were significant differences between all conditions. In the rotational traction test, friction with soccer shoes were greater than friction with running shoes. However, no differences were found between soccer shoes. Higher moments may lead to increased loads and stresses on knee joint structures, and thus, greater injury rates.

• The Journal of Advanced Prosthodontics
• /
• 제11권3호
• /
• pp.187-192
• /
• 2019

PURPOSE. The purpose of this in vitro study was to investigate the fracture loads and modes of failure for the full range of natural teeth under simulated occlusal loading. MATERIALS AND METHODS. One hundred and forty natural teeth were taken from mandibles and maxillas of patients. There were 14 groups of teeth with 10 teeth in each group (5 males and 5 females). Each specimen was embedded in resin and mounted on a positioning jig, with the long axis of the tooth at an inclined angle of 30 degrees. A universal testing machine was used to measure the compression load at which fracture of the tooth specimen occurred; loads were applied on the incisal edge and/or functional cusp. RESULTS. The mean fracture load for the mandibular first premolar was the highest (2002 N) of all the types of teeth, while the mean fracture load for the maxillary first premolar was the lowest (525 N). Mean fracture loads for the mandibular and maxillary incisors, and the first and second maxillary premolars, had significantly lower values compared to the other types of teeth. The mean fracture load for the teeth from males was significantly greater than that for the teeth from females. There was an inverse relationship between age and mean fracture load, in which older teeth had lower fracture loads compared to younger teeth. CONCLUSION. The mean fracture loads for natural teeth were significantly different, with dependence on tooth position and the sex and age of the individual.

• 대한금속재료학회지
• /
• 제48권3호
• /
• pp.203-209
• /
• 2010

An application of the instrumented indentation technique has been expanded from the measurements of hardness and elastic modulus to the analysis of residual stress. A slope of the indentation loading curve increases (or decreases) according to compressive (or tensile) residual stress. A theoretical equation has been established for quantifying residual stress from the slope change. However, a precise observation of the remnant indents is indispensible because the theoretical approach needs actual contact information. In addition, the conventional hardness test is still used for predicting the residual stress distribution of welded joints. Thus, we observed the three-dimensional morphologies of the remnant indents formed on artificial stress states and analyzed stress effects on morphological recovery of the indents. First, a depth recovery ratio, which has been regarded as a sensitive stress indicator, did not show a clear dependency with the residual stress. Thus an analysis on volumetric recovery was tried in this study and yielded a inverse proportional behavior with the residual stress. In addition, an elastic to plastic volume recovery ratio showed more significant correlation with the residual stress.

• Advances in nano research
• /
• 제16권4호
• /
• pp.413-426
• /
• 2024

This paper investigates the dynamic behavior of a simply supported viscoelastic plate made of functionally graded carbon nanotube reinforced composite under dynamic loading. Carbon nanotubes are distributed in 5 different shapes: U, V, A, O and X, depending on the shape they form through the thickness of the plate. The displacement fields are derived in the Laplace domain using a higher-order shear deformation theory. Equations of motion are obtained through the application of the energy method and Hamilton's principle. The resulting equations of motion are solved using Navier's method. Transforming the Laplace domain displacements into the time domain involves Durbin's modified inverse Laplace transform. To validate the accuracy of the developed algorithm, a free vibration analysis is conducted for simply supported plate made of functionally graded carbon nanotube reinforced composite and compared against existing literature. Subsequently, a parametric forced vibration analysis considers the influence of various parameters: volume fractions of carbon nanotubes, their distributions, and ratios of instantaneous value to retardation time in the relaxation function, using a linear standard viscoelastic model. In the forced vibration analysis, the dynamic distributed load applied to functionally graded carbon nanotube reinforced composite viscoelastic plate is obtained in terms of double trigonometric series. The study culminates in an examination of maximum displacement, exploring the effects of different carbon nanotube distributions, volume fractions, and ratios of instantaneous value to retardation times in the relaxation function on the amplitudes of maximum displacements.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.8.1-8.1
• /
• 2011

Nanocrystalline titanium dioxide ($TiO_2$) materials have been widely used as an electron collector in DSSC. This is required to have an extremely high porosity and surface area such that the dye can be sufficiently adsorbed and be electronically interconnected, resulting in the generation of a high photocurrent within cells. In particular, their geometrical structures and crystalline phase have been extensively investigated as important issues in improving its photovoltaic efficiency. In this study, we present a new strategy to fabricate a photoelectrode having a periodic structured $TiO_2$ film templated from 1D or 3D polystyrene (PS) microspheres array. Monodisperse PS spheres of various radiuses were used for colloidal array on FTO glasses and two types of photoelectrode structures with different $TiO_2$ materials were investigated respectively. One is the igloo-shaped electrode prepared by $TiO_2$ deposition by RF-sputtering onto 2D microsphere-templated substrates. At the interface between the film and substrate, there are voids formed by the decomposition of PS microspheres during the calcination step. These holes might be expected to play the predominant roles as scattering spherical voids to promote a light harvesting effect, a spacious structure for electrolytes with higher viscosity and effective paths for electron transfer. Additionally the nanocrystalline $TiO_2$ phase prepared by the RF-sputtering method was previously reported to improve the electron drift mobility within $TiO_2$ electrodes. This yields solar cells with a cell efficiency of 2.45% or more at AM 1.5 illumination, which is a very remarkable result, considering its $TiO_2$ electrode thickness (<2 ${\mu}m$). This study can be expanded to obtain higher cell efficiency by higher dye loading through the increase of surface area or multi-layered stacking. The other is the inverse opal photonic crystal electrode prepared by titania particles infusion within 3D colloidal arrays. To obtain the enlargement of ordered area and high quality of crystallinity, the synthesis of titania particles coated with a organic thin layer were applied instead of sol-gel process using the $TiO_2$ precursors. They were dispersed so well in most solvents without aggregates and infused successfully within colloidal array structures. This ordered mesoporous structure provides the large surface area leading to the enough adsorption of dye molecules and have an light harvesting effect due to the photonic band gap properties (back-and-forth reflection effects within structures). A major advantage of this colloidal array template method is that the pore size and its distribution within $TiO_2$ photoelectrodes are determined by those of latex beads, which can be controlled easily. These materials may have promising potentials for future applications of membrane, sensor and so on as well as solar cells.

• 대한의용생체공학회:의공학회지
• /
• 제24권6호
• /
• pp.515-522
• /
• 2003

인두는 구강과 식도, 비강과 폐의 중간에서 능동적으로 구강을 통해 섭취되는 음식물과 비강을 통해 흡입되는 공기의 통로역할을 하는 주요한 기관이다. 본 연구는 유한요소기법을 이용한 인두의 3차원 구조의 재구성 과정을 거쳐 인두의 생체역학모델을 구현하였으며, 연하곤란환자의 인두근육의 주요부분에 대한 구조적 변형특성을 3가지로 분류하여 유한요소기법을 이용하여 인두내의 압력에 대한 형상의 변형을 관찰 후 최적화 과정을 거쳐 각 부분에서의 추정 압력 구배를 측정하여 연하과정에서 내부에 생성되는 압력의 연속적인 압력분포를 추정하였다. CT에 의한 인두의 변형 형상을 추정하여 임의 압력에 의한 인두구조의 변형 형상을 유한요소 해석에 의해 계산한 후 비교하여 실제 인두강 내에 형성되는 압력을 추정하였다. 재료적 특성은 인두의 기능이상 시 근조직경화가 발생, 즉 stiffness 가 증가하는 것으로 가정하여 응력-변형률 관계에 있어서 각각 $25\%,\;50\%,\;75\%$씩 증가시켜 분석하였다. 이러한 인두의 생체역학모델은 인두기능장애를 가진 환자의 치료 계획 수립에 도움이 되는 유용한 자료를 제공 할 것으로 생각된다.

• 한국식품영양과학회지
• /
• 제42권10호
• /
• pp.1618-1628
• /
• 2013

미국산 땅콩의 지용성 성분의 연구를 위해 일반 품종과 hioleic 품종이 가지는 지방산과 지용성 vitamin 중 하나인 tocopherol의 구성과 그에 대한 상관관계를 살펴보았다. 두 가지 품종에서 확연한 지방산 조성의 차이를 대표적 지방산인 palmitic acid, oleic acid, 그리고 linoleic acid를 중심으로 상관관계를 확인할 수 있었으며, 포화지방산과 ${\beta}$-T 반비례 관계를 통계적 접근을 통해 확인할 수 있었다. 또한 correlation을 통해서 ${\gamma}$-T와 ${\delta}$-T가 높은 비례관계를 가지는 것을 확인하였다. 다변량 분석을 위한 통계기법 중 대표적인 PCA를 통해서 땅콩의 지용성 성분에 대한 해석을 시도하였고, 그 결과 변수로 분류한 지방산과 tocopherol과의 관계를 loading plot을 통해서 확인하였고, score plot을 통해 개별 땅콩 품종들이 보이는 그룹간의 유의성과 차이를 확인할 수 있었다. 통계적 접근을 통해서 일반적인 분석 데이터에서 보여주는 정보 이외의 숨은 결과를 수학적 계산을 근거로 얻을 수 있다는 점에서 PCA를 이용한 통계적 접근법은 앞으로 여타의 땅콩품종이 가진 지용성 및 수용성 성분의 상관관계 및 품종간 그룹별 분류에 좀 더 체계적인 수단으로써 이용될 것으로 판단된다. 그리고 우수한 영양 및 기능성 성분을 가진 땅콩이 육종이라는 과정을 통해서 개량된 high-oleic 품종은 더욱 우수한 영양성분 및 식품으로서의 가공 안정성을 가지고 있어, 식품소재로서의 high-oleic 품종은 전통 품종보다 더욱 유리한 위치에 있다고 판단된다. 또한 연구에서는 선행 연구들에서 발견한 fatty acid와 tocopherol 함량의 유의적인(P<0.05) 상호관계가 나타나지는 않았으나 향후 땅콩을 포함한 식품소재의 성분 분석에 대한 연구 과정에서 잠재적으로 발생 가능한 영양 및 기능성 성분에 대한 상호관계를 탐색 연구하는 연구가 계속적으로 시도되어야 할 것이다.