• Journal of the Korea Society of Computer and Information
• /
• v.13 no.1
• /
• pp.185-192
• /
• 2008

The crosstalk is the most serious problem in playing audio signals with more than two speakers. Usually an inverse filter is employed to remove such a Phenomenon. The LNS method, one of most effective design techniques for an inverse filter, has some advantages such as easy implementation and quick computation. However, the inverse filter designed by the LNS method is not easy to adapt immediately for the delivery system change since the pre-measured impulse response is used to design the filter. In this work, we present an adaptive algorithm for the inverse filter design. With the present algorithm. the inverse filter is initially designed by the LNS methods and continuously adjusted to cope with the delivery system changes. To verify the proposed method. some simulations were carried out and the results confirmed that the performance of the crosstalk calculation can be improved in entire frequency range.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.6
• /
• pp.705-712
• /
• 2004

An inverse boundary analysis of surface radiation in an axisymmetric cylindrical enclosure has been conducted in this study. Net energy exchange method was used to calculate the radiative heat flux on each surface, and a hybrid genetic algorithm was adopted to minimize an objective function, which is expressed by sum of square errors between estimated and measured or desired heat fluxes on the design surface. We have examined the effects of the measurement error as well as the number of measurement points on the estimation accuracy. Furthermore, the effect of a variation in one boundary condition on the other boundary conditions was also investigated to get the same desired heat flux and temperature distribution on the design surface.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.89-92
• /
• 1997

Design of a weld line in a tailor welded blank is indispensable for good manufacturing of stamped parts as assigned, since the intial weld line is distorted severely with forming. The initial weld line has to be determined such that desired weld line in a formed part can be obtained. The initial weld line was predicted by inverse finite element analysis from the desired weld line in a formed part. The inverse approach is applied to the cylindrical and square cup drawing with tailor welded blanks. The applications demonstrates that the approach is useful for design of weld line of tailor welded blank.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.2055-2067
• /
• 1997

Values of process parameters in sheet metal forming can be estimated by various one-step inverse methods. One-step inverse methods based on deformation theory, however, cause some amount of error. The amount of error is generally increased as the deformation path becomes more complex. As a remedy, a new three dimensional multi-step inverse method is introduced for optimum design of blank shapes and strain distributions from desired final shapes. The approach extends a one-step inverse method to a multi-step inverse method in order to reduce the amount of error. The algorithm developed is applied to square cup drawing to confirm its validity by demonstrating reasonably accurate numerical results. Rapid calculation with this algorithm enables easy determination of an initial blank of sheet metal forming.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.8-13
• /
• 2006

A new RS(Reed Solomon) Decoder design method, using Galois Subfield GF($2^4$) Multiplier, is described. The Decoder is designed using Normalized error position stored ROM. Here New Inverse Calculator in GF($2^8$) is designed, which is simpler and faster than the classical GF($2^8$) direct inverse calculator, using the Galois Subfield GF($2^4$) Arithmatic operator.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.62.1-62
• /
• 2001

This paper suggests an inverse optimal PID control design method for the trajectory tracking case of mechanical systems. Also, simple coarse/fine performance tuning laws are suggested based on the analysis for performance limitation of inverse optimal PID controller. Experimental results for a robot manipulator show the validity of our analysis for the performance tuning methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.945-946
• /
• 2012

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.60.6-60
• /
• 2002

$\textbullet$ Introduction $\textbullet$ Modeling of a Piezoelectric Actuator $\textbullet$ Inverse Hysteresis Modeling and Linearization $\textbullet$ Controller Design: PID plus Repetitive Controller $\textbullet$ Simulation Results $\textbullet$ Conclusion

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.101-105
• /
• 1989

The iterative learning controller makes the system output follow the desired output over a finite time interval through iterating trials. In this paper, first we discuss that the design problem of learning controller is originally the design problem of the inverse model. Then we show that the tracking error which is the difference between the desired output and the system output is reduced monotonically by properly modeled inverse system if the magnitude of the learning operator being introduced is bounded within the unit circle in complex domain. Also it would be shown that the conventional learning control method is a kind of extremely simplified inverse model learning control method of the objective controlled system. Hence this control method can be considered as a generalization of the conventional learning control method. The more a designer model the objective controlled system precisely, the better the performance of the approximated inverse model learning controller would be. Finally we compare the performance of the conventional learning control method with that of the approximated inverse model learning control method by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.4
• /
• pp.322-331
• /
• 1988

In this thesis, an active RC filter using high order inverse chebyshev function is designed and the design method for cascading blocks with low sensitivity and maximum dynamic range is discussed. To have maximum dynamic range, we have proposed the simple algorithm with a pole-zero pairing, the cascading sequence by flatness matrix and optimum gain distribution for a given transfer function. And 2nd order Block is designed with negative feedback to improve the sensitivity problem which had a defect at active RC circuits. Using the suggested method, we have designed the active RC low pass filter of the normalized 7th order inverse chebyshev function, as a results, we have shown that this accord with the given specification.