• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.41-57
• /
• 2022

A workflow is presented to estimate the size of a representative elementary volume and 3-D hydraulic conductivity tensor based on fluid flow analysis for a discrete fracture network (DFN). A case study is considered for a Cretaceous granitic rock mass at Gijang in Busan, Korea. The intensity and size of joints were calibrated using the first invariant of the fracture tensor for the 2-D DFN of the study area. Effective hydraulic apertures were obtained by analyzing the results of field packer tests. The representative elementary volume of the 2-D DFN was determined to be 20 m square by investigating the variations in the directional hydraulic conductivity for blocks of different sizes. The directional hydraulic conductivities calculated from the 2-D DFN exhibited strong anisotropy related to the hydraulic behavior of the study area. The 3-D hydraulic conductivity tensor for the fractured rock mass of the study area was estimated from the directional block conductivities of the 2-D DFN blocks generated for various directions in 3-D. The orientations of the principal components of the 3-D hydraulic conductivity tensor were found to be identical to those of delineated joint sets in the study area.

• Korean Journal of Remote Sensing
• /
• v.28 no.4
• /
• pp.393-407
• /
• 2012

This study focuses on the correction of topographic effects caused by a combination of solar elevation and azimuth, and topographic relief in single optical remote sensing imagery, and by a combination of changes in position of the sun and topographic relief in comparative analysis of multi-temporal imageries. For the Jeju Island, Republic of Korea, where Mt. Halla and various cinder cones are located, a Landsat 7 ETM+ imagery and ASTER GDEM data were used to normalize the topographic effects on the imagery, using two topographic normalization methods: cosine correction assuming a Lambertian condition and assuming a non-Lambertian c-correction, with kernel sizes of $3{\times}3$, $5{\times}5$, $7{\times}7$, and $9{\times}9$ pixels. The effects of each correction method and kernel size were then evaluated. The c-correction with a kernel size of $7{\times}7$ produced the best result in the case of a land area with various land-cover types. For a land-cover type of forest extracted from an unsupervised classification result using the ISODATA method, the c-correction with a kernel size of $9{\times}9$ produced the best result, and this topographic normalization for a single land cover type yielded better compensation for topographic effects than in the case of an area with various land-cover types. In applying the relative radiometric normalization to topographically normalized three multi-temporal imageries, more invariant spectral reflectance was obtained for infrared bands and the spectral reflectance patterns were preserved in visible bands, compared with un-normalized imageries. The results show that c-correction considering the remaining reflectance energy from adjacent topography or imperfect atmospheric correction yielded superior normalization results than cosine correction. The normalization results were also improved by increasing the kernel size to compensate for vertical and horizontal errors, and for displacement between satellite imagery and ASTER GDEM.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.1
• /
• pp.25-39
• /
• 1994

The Deogbong napseok clay deposit which is composed mainly of dickite and pyrophyllite has been formed by hydrothermal alteration of the Late Cretaceous volcanic rocks consisting of andesitic tuff and andesite. The mineralogy of the napseok ores and the hydrothermal alteration processes have been studied in order to know the nature of the interaction between minerals and fluids for the formation of the deposit. Chemical distribution shows that alkali elements and silica were mobile but alumina was relatively immobile during the hydrothermal processes. It is evident that enrichment of alumina and leaching of silica from the host rock led to the formation of the napseok ore, whereas the enrichment of silica in the outer zone of the deposit gave rise to the silica zone. A large amount of microcrystalline quartz closely associated with dickite and pyrophyllite suggests the increasing activity of silica. Thus Si which was released away from the argillic zone by the increasing activity of silica. Thus Si which was released away from the argillic zone by the increasing activity of silica solubility moved out precipitating in the margin of the deposit to form the silica zone. Variation in dickite crystallinity implies the local change in the stability of the system. Thermodynamic calculation shows that the invariant point of pyrophyllite-dickite (kaolinite)-diaspore-quartz assemblages at 500 bars in the system $Al_{2}O_{3}-SiO_{2}-H_{2}O$ is about 300 $^{\circ}C$. Based on the mineral assemblages and the experimental data reported, it is estimated that the main episode of hydrothermal alteration occurred at least above 270 to 300 $^{\circ}C$ and $X_{CO_2}$ <0.025. Mineral occurrence and chemical variation indicate that the activity of Al is high in the upper part of the deposit, whereas the activity of Si is high in the lower part and the margin of the deposit. The nonequilibrium phase relations observed in the Deogbong deposit might be due to local change in intensive thermodynamic variables and fluid transport properties that resulted in the formation of nonequilibrium phases b of several stages.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.3
• /
• pp.157-165
• /
• 2006

The change of external/internal factors of the cell rquires specific biological functions to maintain life. Such functions encourage particular genes to jnteract/regulate each other in multiple ways. Accordingly, we applied a linear decomposition model IFSA, which derives hidden variables, called the 'expression mode' that corresponds to the functions. To interpret gene interaction/regulation, we used a cross-correlation method given an expression mode. Linear decomposition models such as principal component analysis (PCA) and independent component analysis (ICA) were shown to be useful in analyzing high dimensional DNA microarray data, compared to clustering methods. These methods assume that gene expression is controlled by a linear combination of uncorrelated/indepdendent latent variables. However these methods have some difficulty in grouping similar patterns which are slightly time-delayed or asymmetric since only exactly matched Patterns are considered. In order to overcome this, we employ the (IFSA) method of [1] to locate phase- and shut-invariant features. Membership scoring functions play an important role to classify genes since linear decomposition models basically aim at data reduction not but at grouping data. We address a new function essential to the IFSA method. In this paper we stress that IFSA is useful in grouping functionally-related genes in the presence of time-shift and expression phase variance. Ultimately, we propose a new approach to investigate the multiple interaction information of genes.

• Applied Biological Chemistry
• /
• v.23 no.1
• /
• pp.23-30
• /
• 1980

Labelling of chromatin proteins with 32P was observed after incubating isolated liver nuclei with $[{\gamma}-32P]$ ATP for 5 minutes at $37^{\circ}C$. The pattern of labelling with 32P was examined on SDS polyacrylamide gel electrophoresis with nuclei from rats maintained in a starvation state for 48 hours, following refeeding for 12 hours; and from fed streptozotocin-diabetic rats with insulin injection 6 hours before sacrifice. With 48h starved rat liver nuclei the level of phosphorylation for 0.14M NaCl soluble proteins was decreased in the molecular weights between 41,000 and 200,000 daltons relative to normal controls. Refeeding the starved rats reversed the change of phosphorylation pattern over 12 hour The level of phosphorylation for five phenol soluble non-histone proteins with molecular weights above 59,000 daltons was somewhat decreased with 48h starved rat liver nuclei as compared with that of normal controls. Starvation also decreased the phosphorylation level of major histones in relation to normal controls. The experiment with insulin injection into fed streptozotocin-diabetic rats showed the tendency to increase phosphorylation of 0.14M NaCl soluble proteins (130,000 dalton protein) and phenol soluble non-histone proteins (155,000 dalton protein). The phosphorylation level of histones appeared to be invariant under the experimental conditoins employed here. These results suggest the possibility that the phosphorylation and dephosphorylation of 0.14M NaCl soluble proteins and $H_1$ histone precede those of other chromatin associated nuclear proteins, It is of interest to find that insulin signal was correlated to phosphorylation of nuclear proteins while glucagon signet dephosphorylated nuclear proteins.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.2
• /
• pp.123-134
• /
• 2010

Considering the benefits for both consumers and suppliers, firms are taking advantage of the Internet as a medium to communicate with and sell products to their consumers. This trend makes the online shopping environment a growing field for both researchers and practitioners. This paper contributes by testing a model of online consumer behavior with websites varying in levels of hedonism. Unlike past studies, we included all three types of emotions (arousal, pleasure, and dominance) and flow into the model. In this study, we assumed that website interfaces, such as background colors, music, and fonts impact the three types of emotions at the initial exposure to the site (Mazaheri, Richard, and Laroche, 2011). In turn, these emotions influence flow and consumers' perceptions of the site atmospherics-perception of site informativeness, effectiveness, and entertainment. This assumption is consistent with Zajonc (1980) who argued that affective reactions are independent of perceptual and cognitive operations and can influence responses. We, then, propose that the perceptions of site atmospherics along with flow, influence customers' attitudes toward the website and toward the product, site involvement, and purchase intentions. In addition, we studied the moderating impact of the level of hedonism of websites on all the relationship in the model. Thus, the path coefficients were compared between "high" and "low" hedonic websites. We used 39 real websites from 12 product categories (8 services and 4 physical goods) to test the model. Among them, 20 were perceived as high hedonic and 19 as low hedonic by the respondents. The result of EQS 6.1 support the overall model: $\chi^2$=1787 (df=504), CFI=.994; RMSEA=.031. All the hypotheses were significant. In addition, the results of multi-groups analyses reveal several non-invariant structural paths between high and low hedonic website groups. The findings supported the model regarding the influence of the three types of emotions on customers' perceptions of site atmospherics, flow, and other customer behavior variables. It was found that pleasure strongly influenced site attitudes and perceptions of site entertainment. Arousal positively impacted the other two types of emotions, perceptions of site informativeness, and site involvement. Additionally, the influence of arousal on flow was found to be highly significant. The results suggested a strong association between dominance and customers' perceptions of site effectiveness. Dominance was also found to be associated with site attitudes and flow. Moreover, the findings suggested that site involvement and attitudes toward the product are the most important antecedents of purchase intentions. Site informativeness and flow also significantly influenced purchase intentions. The results of multi-group analysis supported the moderating impacts of hedonism of the websites. Compared to low (high) hedonic sites, the impacts of utilitarian (hedonic) attributes on other variables were stronger in high (low) hedonic websites. Among the three types of emotions, dominance (controlling feelings) effects were stronger in high hedonic sites and pleasure effects were stronger in low hedonic sites. Moreover, the impact of site informativeness was stronger for high hedonic websites compared to their low-hedonic counterparts. On the other hand, the influence of effectiveness of information on perceptions of site informativeness and the impact of site involvement on product attitudes were stronger for low hedonic websites than for high hedonic ones.

• KDI Journal of Economic Policy
• /
• v.30 no.1
• /
• pp.71-130
• /
• 2008

Using data from the Korean Labor & Income Panel Study (KLIPS), this study investigates private income transfers in Korea, where adult children have undertaken the most responsibility of supporting their elderly parents without well-established social safety net for the elderly. According to the KLIPS data, three out of five households provided some type of support for their aged parents and two out of five households of the elderly received financial support from their adult children on a regular base. However, the private income transfers in Korea are not enough to alleviate the impact of the fall in the earned income of those who retired and are approaching an age of needing financial assistance from external source. The monthly income of those at least the age of 75, even with the earning of their spouses, is below the staggering amount of 450,000 won, which indicates that the elderly in Korea are at high risk of poverty. In order to analyze microeconomic factors affecting the private income transfers to the elderly parents, the following three samples extracted from the KLIPS data are used: a sample of respondents of age 50 or older with detailed information on their financial status; a five-year household panel sample in which their unobserved family-specific and time-invariant characteristics can be controlled by the fixed-effects model; and a sample of the younger split-off household in which characteristics of both the elderly household and their adult children household can be controlled simultaneously. The results of estimating private income transfer models using these samples can be summarized as follows. First, the dominant motive lies on the children-to-parent altruistic relationship. Additionally, another is based on exchange motive, which is paid to the elderly parents who take care of their grandchildren. Second, the amount of private income transfers has negative correlation with the income of the elderly parents, while being positively correlated with the income of the adult children. However, its income elasticity is not that high. Third, the amount of private income transfers shows a pattern of reaching the highest level when the elderly parents are in the age of 75 years old, following a decreasing pattern thereafter. Fourth, public assistance, such as the National Basic Livelihood Security benefit, appears to crowd out private transfers. Private transfers have fared better than public transfers in alleviating elderly poverty, but the role of public transfers has been increasing rapidly since the welfare expansion after the financial crisis in the late 1990s, so that one of four elderly people depends on public transfers as their main income source in 2003. As of the same year, however, there existed and occupied 12% of the elderly households those who seemed eligible for the National Basic Livelihood benefit but did not receive any public assistance. To remove elderly poverty, government may need to improve welfare delivery system as well as to increase welfare budget for the poor. In the face of persistent elderly poverty and increasing demand for public support for the elderly, which will lead to increasing government debt, welfare policy needs targeting toward the neediest rather than expanding universal benefits that have less effect of income redistribution and heavier cost. Identifying every disadvantaged elderly in dire need for economic support and providing them with the basic livelihood security would be the most important and imminent responsibility that we all should assume to prepare for the growing aged population, and this also should accompany measures to utilize the elderly workforce with enough capability and strong will to work.

• Asia pacific journal of information systems
• /
• v.20 no.3
• /
• pp.115-137
• /
• 2010

Information technology (IT) outsourcing, the use of a third-party vendor to provide IT services, started in the late 1980s and early 1990s in Korea, and has increased rapidly since 2000. Recently, firms have increased their efforts to capture greater value from IT outsourcing. To date, there have been a large number of studies on IT outsourcing. Most prior studies on IT outsourcing have focused on outsourcing practices and decisions, and little attention has been paid to objectively measuring the value of IT outsourcing. In addition, studies that examined the performance of IT outsourcing have mainly relied on anecdotal evidence or practitioners' perceptions. Our study examines the contribution of IT outsourcing to economic growth in Korean industries over the 1990 to 2007 period, using a production function framework and a panel data set for 54 industries constructed from input-output tables, fixed-capital formation tables, and employment tables. Based on the framework and estimation procedures that Han, Kauffman and Nault (2010) used to examine the economic impact of IT outsourcing in U.S. industries, we evaluate the impact of IT outsourcing on output and productivity in Korean industries. Because IT outsourcing started to grow at a significantly more rapid pace in 2000, we compare the impact of IT outsourcing in pre- and post-2000 periods. Our industry-level panel data cover a large proportion of Korean economy-54 out of 58 Korean industries. This allows us greater opportunity to assess the impacts of IT outsourcing on objective performance measures, such as output and productivity. Using IT outsourcing and IT capital as our primary independent variables, we employ an extended Cobb-Douglas production function in which both variables are treated as factor inputs. We also derive and estimate a labor productivity equation to assess the impact of our IT variables on labor productivity. We use data from seven years (1990, 1993, 2000, 2003, 2005, 2006, and 2007) for which both input-output tables and fixed-capital formation tables are available. Combining the input-output tables and fixed-capital formation tables resulted in 54 industries. IT outsourcing is measured as the value of computer-related services purchased by each industry in a given year. All the variables have been converted to 2000 Korean Won using GDP deflators. To calculate labor hours, we use the average work hours for each sector provided by the OECD. To effectively control for heteroskedasticity and autocorrelation present in our dataset, we use the feasible generalized least squares (FGLS) procedures. Because the AR1 process may be industry-specific (i.e., panel-specific), we consider both common AR1 and panel-specific AR1 (PSAR1) processes in our estimations. We also include year dummies to control for year-specific effects common across industries, and sector dummies (as defined in the GDP deflator) to control for time-invariant sector-specific effects. Based on the full sample of 378 observations, we find that a 1% increase in IT outsourcing is associated with a 0.012~0.014% increase in gross output and a 1% increase in IT capital is associated with a 0.024~0.027% increase in gross output. To compare the contribution of IT outsourcing relative to that of IT capital, we examined gross marginal product (GMP). The average GMP of IT outsourcing was 6.423, which is substantially greater than that of IT capital at 2.093. This indicates that on average if an industry invests KRW 1 millon, it can increase its output by KRW 6.4 million. In terms of the contribution to labor productivity, we find that a 1% increase in IT outsourcing is associated with a 0.009~0.01% increase in labor productivity while a 1% increase in IT capital is associated with a 0.024~0.025% increase in labor productivity. Overall, our results indicate that IT outsourcing has made positive and economically meaningful contributions to output and productivity in Korean industries over the 1990 to 2007 period. The average GMP of IT outsourcing we report about Korean industries is 1.44 times greater than that in U.S. industries reported in Han et al. (2010). Further, we find that the contribution of IT outsourcing has been significantly greater in the 2000~2007 period during which the growth of IT outsourcing accelerated. Our study provides implication for policymakers and managers. First, our results suggest that Korean industries can capture further benefits by increasing investments in IT outsourcing. Second, our analyses and results provide a basis for managers to assess the impact of investments in IT outsourcing and IT capital in an objective and quantitative manner. Building on our study, future research should examine the impact of IT outsourcing at a more detailed industry level and the firm level.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.1 no.1
• /
• pp.21-32
• /
• 1981

Recent trends in design standards development in some European countries and U.S.A. have encouraged the use of probabilistic limit sate design concepts. Reliability based design criteria such as LSD, LRFD, PBLSD, adopted in those advanced countries have the potentials that they afford for symplifying the design process and placing it on a consistent reliability bases for various construction materials. A reliability based design criteria for RC flexural members are proposed in this study. Lind-Hasofer's invariant second-moment reliability theory is used in the derivation of an algorithmic reliability analysis method as well as an iterative determination of load and resistance factors. In addition, Cornell's Mean First-Order Second Moment Method is employed as a practical tool for the approximate reliability analysis and the derivation of design criteria. Uncertainty measures for flexural resistance and load effects are based on the Ellingwood's approach for the evaluation of uncertainties of loads and resistances. The implied relative safety levels of RC flexural members designed by the strength design provisions of the current standard code were evaluated using the second moment reliability analysis method proposed in this study. And then, resistance and load factors corresponding to the target reliability index(${\beta}=4$) which is considered to be appropriate level of reliability considering our practices are calculated by using the proposed methods. These reliability based factors were compared to those specified by our current ultimate strength design provisions. It was found that the reliability levels of flexural members designed by current code are not appropriate, and the code specified resistance and load factors were considerably different from the reliability based resistance and load factors proposed in this study.

• 한국노년학
• /
• v.38 no.4
• /
• pp.1035-1055
• /
• 2018

The purpose of this study is to investigate the relationship between public care and family care. Public care for older adults began in 2008 with the implementation of the Long-Term Care insurance in South Korea. Although the expansion of public care has the purpose of reducing the care burden for the family, it is not easy to say whether the developments of public care system reduce the amount of family care for older family members. Theoretically, public care and family care are expected to have various relationships depending on the degree of the role and function(substitution, hierarchical compensatory, task specific, supplementation, complementarity). And literatures have showed inconsistent results depending on the country, data, and methods. In this study, we analyzed the relationship between two care types focusing on home care services for older persons. Analyses were based on data from the second(2008) to sixth(2016) waves of Korean Longitudinal Study of Ageing(KLoSA). To investigate elderly care dynamics in the households, we pooled the data for four changes between two periods(2008-2010, 2010-2012, 2012-2014, and 2014-2016). This study used an analytic sample of 262 older adults, who are aged 55 over and experienced public care at least one point of time. We used Fixed-Effects(FE) model to analyze the differences within the same individuals under the condition that time-invariant unobserved factors are controlled. This study distinguished the cases of entry into public care and other cases of exiting public care. The results showed that older people who are dependent on public care are less dependent on family care than before. In both entry and exit groups, negative relations were maintained, but in the entering stage of public care, the degree of negative relations was relatively small, whereas in the stage of maintaining or departing from public care, relatively negative relations were strong. At the beginning periods, even though public care increased, family care did not decrease significantly. On the other hand, at the time of ending public care and relying on family care, family care increased significantly. The results of this study show that the relationship between public care and family care is close to hierarchical compensatory model and varies according to the stage of caring transition. Also, it was found that the cases of transition from public care to family care have the biggest burden of elderly care than other groups.