• International Journal of Highway Engineering
• /
• 제13권2호
• /
• pp.57-65
• /
• 2011

In this study, estimated the minimum lane width for the curved section by analyzing of lateral sway distance and compared the lane width for result of this study and a precedent study for straight section on urban roads. Then suggested minimum lane width of road alignments and vehicle classes. The lane width of curved section that was investigated was 2.79m~3.40m. Analysis of frequency distribute and cumulative frequency distribution for lateral sway distance on the basis of 85% of the suggested vehicles. The result of study, minimum lane width for the curved section was 2.31m~2.58m in the case of small size car and 2.80m~3.27m in the case of large size car. Result of this study is judged that it is necessary to case for introduction of green transit, during road construction and construct a road for small size car. Expect result of this study can be used for the application of flexible design standard according the purpose of road designer.

• Ecology and Resilient Infrastructure
• /
• 제4권3호
• /
• pp.169-179
• /
• 2017

This study analyzed the aspect of bed change according to the stable channel design on the Wonju River to quantitatively evaluate habitat suitability (HS). According to the result of evaluating stable channel of object section in the Wonju River, 17 sections among total 20 sections were stable and 3 sections were unstable. Physical disturbance improvement evaluation (PDIE) was the range average showed good disturbance condition with a range average of 112.17 points. Habitat suitability index of Zacco Koreanus, the most dominant species of the Wonju River, was used for analysis of physical habitat for fish. According to the physical habitat analysis result, HS was 0.16 and weighted usable area (WUA) was $347.68m^2$. The methods of improving/introducing/removing structures and dredging stream channel were used for stable channel design of unstable channel, and analyzed PDIE according to the aspect of bed change and changes in habitat suitability. Stable channel design was possible in 19 sections in times of structures improvement/introduction/removal, and PDIE was 117.53 points, HS was 0.14 points, and WUA was $313.37m^2$. Stable channel design was possible in all 20 sections when dredging the stream channel. PDIE was 116.50 points, HS was 0.16, and WUA was $332.14m^2$. Therefore, this study obtained channel design measures that can improve physical soundness and stability of the Wonju River, and it was analyzed that it will have no impact on changes of physical disturbance and physical habitat. Furthermore, this study analyzed velocity and depth of each section and appearance frequency of riffle and pool to analyze correlation between physical disturbance and physical habitat. According to the analysis result, it was identified that the analysis of riffle and pool showed similar result as the evaluation result of physical habitat.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권12호
• /
• pp.872-877
• /
• 2018

STEAM is an acronym for Science, Technology, Engineering, Arts, and Mathematics. It is considered important to equip students with a creative thinking ability and the core competences required in future society, helping them devise new ideas emerging from branches of study. This study is about the convergence of instructional design in private finance for the life sciences, which aims to foster talent through problem-based learning (PBL). Skills like collaboration, creativity, critical thinking, and problem solving are part of any STEAM PBL, and are needed for students to be effective. STEAM projects give students a chance to problem-solve in unique ways, because they are forced to use a variety of methods to solve problems that pop up during these types of activities. The results of this study are as follows. First is the structured process of convergence lessons. Second is the convergence lesson process. Third is the development of problems in the introduction of private finance and the life sciences for a convergence lesson at Dornod University. Learning motivation shows the following results: understanding of learning content (66.6%), effectiveness (63.3%), self-directed learning (59.9%), motivation (63.2%), and confidence (63.3%). To make an effective model, studies applying this instructional design are to be implemented.

• Journal of Practical Engineering Education
• /
• 제12권1호
• /
• pp.117-125
• /
• 2020

According to the government's smart factory promotion project for small and medium-sized enterprises, more than 10,000 intelligent factories are scheduled or already built in the country and the government-led goal is to nurture 100,000 skilled workers by 2022. Smart Factory introduces numerous types of education and training courses from the supplier's point of view, such as training institutions belonging to local governments, some universities, and public organizations, in the form of an efficient resource management system and ICT technology convergence in the automated manufacturing equipment. The lack of linkage with the NCS, the standard for training, seems to have room for rethinking and direction. Results of survey is provided for the family companies of K-University in the metropolitan area and Chungnam area, and analyzes job demands by identifying whether or not they want to introduce smart factories. Defining the practitioners who will serve as a window for the introduction of smart factory technology within the company, setting up a training goal in consideration of the career path, and including the level of training required competency units, optional competency units, and training time suitable for introducing and operating smart factories. Author would like to present an NCS-based qualification design plan.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제28권4호
• /
• pp.361-368
• /
• 2015

Recently, the earthquake has been increasing a lot, damage of electric power facility has been serious as well. Nowadays, the importance of pipe support system such as Hanger, Brace, Snubber connecting the main structure have been emphasized. These devices can prevent pipe from damage so that reduce the vibration and shock acting on the pipe. For this reason, the FCD(Friction Concave Damper) was developed and has been expected to reduce the vibration on the pipe through the Friction Pendulum System. This paper was described the introduction of self-developed mechanical damper using the friction pendulum principle and the characteristic test was performed to verify the performance of the device. Additionally the test results have been compared with predicted F.A.P(FCD Analysis Program-self developed) results. As a result, reliability of design could be improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권9호
• /
• pp.7-12
• /
• 2018

In the society where the paradigm of knowledge is rapidly changing and developing, convergence emphasizing the connection between knowledge and technology in various fields is significant. In order to cultivate these creative-convergent talents, STEAM(Science, Technology, Engineering, Arts, and Mathematics) is being considered important to make them equipped with creative thinking ability and core competence required in the future society and help them devise new ideas escaping from the branches of study. This study is about convergence instructional design of computer with marketing subject, which aims to foster talent. The results of this study are as follows. First, the structured process of convergence lessons. Second, the convergence lesson was based on a cyclic process with steps : selection of the subject concerned, selection of a topic, designing the lesson, mapping out the lesson plan and developing problems, having a final discussion on the whole lesson, performing the lesson and evaluating the lesson. Third, the development of the problems about the introduction of computer engineering and Internet marketing subject for convergence lessons. To make an effect of this model, studies applying this instructional design to many lectures should be implemented.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• 제35권11호
• /
• pp.117-128
• /
• 2019

The necessity of the Toi-Maru has increased greatly in order to enter to the building or to move conveniently in the building after the mid-Joseon period, when the combination of On-dol Ma-ru began to be universally used. According to this process, the 3-Dori type upper structure is thought to have undergone the typological changed by securing a more stable space of Toi-Maru In cases where a relatively large girder was used, it is often the case that the space is divided using a pillar to place a Toi-Maru on the front. However, it is difficult to find a case where the width of the Toi-Maru exceeds 1meter due to its structural limit. The type that made additional Toi-girder to overcome the spatial constraint of this structure and replaced the method of former typology after Mid-Jpseon period. In case of 5-Dori type, Toi-Maru installed in between high post and Toi post in early period. In these type, the width of Toi-Maru was subordinated by the location of milled Dori of roof structure and sometimes it became too excessive. 5-Dori type with Pyon-ju occurred to overcome these restriction between the width of Toi-Maru and the location of milled Dori of roof structure. Not a few remains of Mid-Jpseon period keeping the evidences of changing process of roof structure provoked by Toi-Maru installation. The consistent process of Toi-Maru installation and structural adjustment will be focused to consider the attempt to spatial requirement and architectural reaction in Mid-Joseon perid.

• Korean Journal of Construction Engineering and Management
• /
• 제15권6호
• /
• pp.16-25
• /
• 2014

Recent national policy agenda of 'Low-Carbon Green Growth' has been implemented as the important vision of the country. The government has set a target of entering the seven major world powers of Green Nation at 2020, and five major world powers at 2050. In order to achieve the goal, the reduction of greenhouse gases and the composition of green land and transportation has been promoted as an important policy. In a construction industry sector, policies and technologies for reducing greenhouse gas emissions and energy have been actively developed. In the case of developed countries, research for green road infrastructure has been conducted, which is the basis for certification system of green highway. This paper benchmarks the policies and cases of developed countries, verifies the applicability in the domestic road sector, and suggests the introduction of the certification system of green highway.

• Investigative Magnetic Resonance Imaging
• /
• 제24권3호
• /
• pp.95-122
• /
• 2020

In this article, we evaluated the performance of radiofrequency (RF) coils in terms of the signal-to-noise ratio (S/N) and homogeneity of magnetic resonance images when used for ultrahigh-frequency (UHF) 7T magnetic resonance imaging (MRI). High-quality MRI can be obtained when these two basic requirements are met. However, because of the dielectric effect, 7T magnetic resonance imaging still produces essentially a non-uniform magnetic flux (|B₁|) density distribution. In general, heterogeneous and homogeneous RF coils may be designed using electromagnetic (EM) modeling. Heterogeneous coils, which are surface coils, are used in consideration of scalability in the |B₁| region with a high S/N as multichannel loop coils rather than selecting a single loop. Loop coils are considered state of the art for their simplicity yet effective |B₁|-field distribution and intensity. In addition, combining multiple loop coils allows phase arrays (PA). PA coils have gained great interest for use in receiving signals because of parallel imaging (PI) techniques, such as sensitivity encoding (SENSE) and generalized autocalibrating partial parallel acquisition (GRAPPA), which drastically reduce the acquisition time. With the introduction of a parallel transmit coil (pTx) system, a form of transceiver loop arrays has also been proposed. In this article, we discussed the applications and proposed designs of loop coils. RF homogeneous coils for volume imaging include Alderman-Grant resonators, birdcage coils, saddle coils, traveling wave coils, transmission line arrays, composite right-/left-handed arrays, and fusion coils. In this article, we also discussed the basic operation, design, and applications of these coils.

• Journal of the Korean Institute of Landscape Architecture
• /
• 제18권3호통권39호
• /
• pp.99-113
• /
• 1990

The purpose of this study was to prepare some more up-dated and advanced curriculum in Landscape Architecture in Junior College education to bring up a leading professional who can meet the changing social needs. To achieve this goal, the data about the actual employment status of graduates, current relevant systems and legistations, the questionnaires of Landscape companies, graduates and undergraduates, and the current relevant curriculum of domain 6 junior colleges and Japanese relevant curriculum was gathered and analyzed The results are as follows ; 1. Currently the majority of the graduates are employed in Construction field, but the employment trend of graduates shows diversification and subdividing as following 5 fields, that is Construction, Design, Maintenance, Administration and Indoor Landscaping. 2. It is essential to bring up a Landscape Technician who has a Landscape Certificate of qualifications(esp. 2nd class). 3. Lately, the actual Practice came to be one item of the qualifying examination, so the subjects of Landscape Design, Landscape Construction and Landscape Estimation Should be emphasized, Accordingly, current curriculum should be revised. 4. Currant curriculum model(1979) made by the Ministry of Education doesn't play a real and adequate role and should be up-dated in view of the current curriculum of domain 6 junior colleges has no regular standards. In preparation for new standardized curriculum model, following criterior could be suggested, that is, ratio of the Major Required Subjects vs. The Major Optional Subjects would be 50 : 50, and the Major Optional Subject would be 48 credits which is 150% of the Required Credits(32 credits) 5. The subjects such as Basic Agriculture, Afforestation, Nature Conservation, Sketch, Civil Engineering, Landscape Seminar and Modelling Practice would be deleted in the curriculum model established in 1983. 6. The subjects such as Perspective Practice, Indoor Landscaping, Landscape Legislation and Landscape Design( III ) could be newly opened to meet the social needs, to prepare for the qualifying examination and to serve well in the employment fields. 7. The subjects of Surveying ( I ) & ( II ) would be unified into one Subject as Surveying, and some in view of the average situation of 6 junior colleges. 8. It is urgent to open some subject related to computer. At first, An Introduction to Computer could be recommended in the cultural studies course and Landscape Computer Technique as the Major Optional Subjects.